[asterisk-gui] asterisk-gui Digest, Vol 9, Issue 9

[Peter Nguyen]

ZAP/g1 means group 1. So anything defined in group g1 can be used as long as they're available. In essence, your config may look like this:

context=incoming        ; Incoming calls go to [incoming] in extensions.conf
signalling=fxs_ks       ; Use FXS signalling for an FXO channel
group=1
channel => 2-4            ; PSTN attached to port 2 to 4

then in your dialplan you can use:

exten => NXXXXXX,1,Dial(ZAP/g1/${EXTEN}

this will cause asterisk to dial any 7 digits number that starts with 2 and send it out the first available channel in group g1 which includes channels 2 through 4. I hope this help


Peter Nguyen
L.A. Fitness International, LLC
2600 Michelson Drive, Suite 300
Irvine, California 92612
VoIP Administrator * (877) 561-9944


-----Original Message-----
From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-bounces at lists.digium.com] On Behalf Of asterisk-gui-request at lists.digium.com
Sent: Friday, July 13, 2007 10:00 AM
To: asterisk-gui at lists.digium.com
Subject: asterisk-gui Digest, Vol 9, Issue 9

Send asterisk-gui mailing list submissions to
	asterisk-gui at lists.digium.com

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.digium.com/mailman/listinfo/asterisk-gui
or, via email, send a message with subject or body 'help' to
	asterisk-gui-request at lists.digium.com

You can reach the person managing the list at
	asterisk-gui-owner at lists.digium.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of asterisk-gui digest..."


Today's Topics:

   1. Re: GUI Dial Plan - outgoing via multiple possible lines
      (roll-over) (Sam Snow)


----------------------------------------------------------------------

Message: 1
Date: Thu, 12 Jul 2007 13:46:31 -0400
From: Sam Snow <snowsam at laurel-point.net>
Subject: Re: [asterisk-gui] GUI Dial Plan - outgoing via multiple
	possible lines	(roll-over)
To: Asterisk GUI project discussion <asterisk-gui at lists.digium.com>
Message-ID: <469668F7.2060101 at laurel-point.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

bkruse wrote:
> Seems like a good idea, sam.
>
> However, why not just put them all in a group, and let asterisk decide 
> which one to dial out from?
>
> -bk
>
>
>   

Using Groups was my first thought as well. Because of the way the GUI 
creates the dial plan I don't see how this is possible. The dialplan 
references "trunk_1" which is hard coded at the top of the extensions 
file to be Zap/g1 (one line). Right?

To complete the picture of my setup, here is the interesting part of my 
zapata.conf:

; define channels
context=incoming        ; Incoming calls go to [incoming] in extensions.conf
signalling=fxs_ks       ; Use FXS signalling for an FXO channel
group=1
channel => 2            ; PSTN attached to port 2

context=incoming        ; Incoming calls go to [incoming] in extensions.conf
signalling=fxs_ks       ; Use FXS signalling for an FXO channel
group=1
channel => 3            ; PSTN attached to port 3

context=incoming        ; Incoming calls go to [incoming] in extensions.conf
signalling=fxs_ks       ; Use FXS signalling for an FXO channel
group=1
channel => 4            ; PSTN attached to port 4

And the only part interesting in zaptel.conf is:
fxsks=2,3,4





------------------------------

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui

End of asterisk-gui Digest, Vol 9, Issue 9
******************************************


--------------------------------------------------------------------
Internet communications are not secure, and therefore LA Fitness
does not accept legal responsibility for the contents of this message.
However, LA Fitness reserves the right to monitor the transmission
of this message and to take corrective action against any misuse or
abuse of its e-mail system or other components of its network. The
information contained in this e-mail is confidential and may be
legally privileged.  It is intended solely for the addressee. If you
are not the intended recipient, any disclosure, copying, distribution,
or any action or act of forbearance taken in reliance on it, is
prohibited and may be unlawful. Any views expressed in this e-mail are
those of the individual sender, except where the sender has been duly
authorized to specifically state the content of the e-mail on
behalf of LA Fitness.  The recipient should check this e-mail and any
attachments for the presence of viruses. LA Fitness accepts no liability
for any damage caused by any viruses transmitted by this e-mail.