R: R: R: [asterisk-gui] Problem with configuring GUI

[Pari Nannapaneni]

Maurizio,

I guess  this is a specific situation you are running into.
I'll contact you off list.
You can also try #asterisk-gui on irc.freenode.net

thanks
-Pari


Maurizio Pederneschi wrote:
> Ok, I have replaced also the 2.html page and the 'next' button is now
> enabled. The problem now is on the third page... All the fields are
> disabled, included 'back' and 'next'.
> 
> Do I have to replace all the asterisk-gui package?
> 
> Thanks...
> 
> -----Messaggio originale-----
> Da: Pari Nannapaneni [mailto:pari at digium.com] 
> Inviato: lunedì 8 gennaio 2007 18.46
> A: Maurizio Pederneschi
> Cc: 'Asterisk GUI project discussion'
> Oggetto: Re: R: R: [asterisk-gui] Problem with configuring GUI
> 
>  > I have replaced my version of gui_sysinfo with the latest version (217),
> but
>  > I still have the same problem.
>  >
>  > Do I need to make particular operations after I have replaced this file?
> 
> interesting,
> have you updated your '/var/lib/asterisk/static-http/config/setup/2.html' ?
> Because that is where I removed 'the disabling of the next button'.
> 
> The way it used to be was
> #1. disable the next button on page load
> #2. get the current system date using the date command
> #3. parse the output and update the corresponding fields
> #4. enable the next button
> 
> so if there was an error during #3 the next button was just being disabled.
> To fix this I removed #1 in 2.html in commit 207.
> So, if you have the latest 2.html, the next button should be enabled no
> matter what.
> 
> thanks
> -Pari
> 
> 
> Maurizio Pederneschi wrote:
>> Thank for your help Pari,
>>
>> I have replaced my version of gui_sysinfo with the latest version (217),
> but
>> I still have the same problem.
>>
>> Do I need to make particular operations after I have replaced this file?
>>
>> Bye,
>> Maury
>>
>> -----Messaggio originale-----
>> Da: Pari Nannapaneni [mailto:pari at digium.com] 
>> Inviato: lunedì 8 gennaio 2007 17.59
>> A: Maurizio Pederneschi
>> Cc: 'Asterisk GUI project discussion'
>> Oggetto: Re: R: [asterisk-gui] Problem with configuring GUI
>>
>> Hi Maurizio,
>>
>>  >> can you plz check whether you have the latest
>>  >> /etc/asterisk/gui_sysconfig , I have recently updated this script.
>>
>> i'm sorry about confusing you, I meant /etc/asterisk/gui_sysinfo
>> and not /etc/asterisk/gui_sysconfig. My mistake.
>>
>>  > The problem occurs when I try to configure the GUI from the setup.html.
> I
>>  > see that there are 7 steps but at the second (Date&Time Setting) the
>> "next"
>>  > button appears to be disabled.
>>
>> The issue mentioned here is fixed in commit 207.
>>
>> thanks
>> Pari
>>
>>
>>
>> Maurizio Pederneschi wrote:
>>> Sorry Pari if I reply you so late...
>>>
>>> I tried to check /etc/gui_sysconfig as you suggest, but I see that I
>> haven't
>>> this file in my /etc/asterisk. If I make ls gui*, this is the output I
>>> obtain:
>>>
>>> Gui_custommenus.conf
>>> Gui_sysinfo
>>> Gui_sysinfo.conf
>>>
>>> Nothing else.
>>>
>>> Can the problem on the "next" button depend on some wrong permissions?
>> I've
>>> installed all the component as 'root' user.
>>>
>>> Thanks,
>>> Maury
>>>
>>>
>>>
>>> -----Messaggio originale-----
>>> Da: asterisk-gui-bounces at lists.digium.com
>>> [mailto:asterisk-gui-bounces at lists.digium.com] Per conto di Pari
>> Nannapaneni
>>> Inviato: sabato 30 dicembre 2006 19.35
>>> A: Asterisk GUI project discussion
>>> Oggetto: Re: [asterisk-gui] Problem with configuring GUI
>>>
>>> Hi Maurizio 
>>>
>>> can you plz check whether you have the latest
>>> /etc/asterisk/gui_sysconfig , I have recently updated this script.
>>>
>>> -Pari
>>>
>>>
>>> ----- Original Message -----
>>> From: Maurizio Pederneschi <maury76 at rita.it>
>>> To: asterisk-gui at lists.digium.com
>>> Sent: Saturday, December 30, 2006 3:09:17 AM GMT-0600 US/Central
>>> Subject: [asterisk-gui] Problem with configuring GUI
>>>
>>> Hi, 
>>>
>>> I have installed Asterisk 1.4 + Asterisk GUI. 
>>>
>>> All seems to work fine and the output of the "make checkconfig" says that
>>> the varius component are OK. 
>>>
>>> The problem occurs when I try to configure the GUI from the setup.html. I
>>> see that there are 7 steps but at the second (Date&Time Setting) the
>> "next"
>>> button appears to be disabled. 
>>>
>>>   
>>>
>>> Someone can help me? 
>>>
>>>   
>>>
>>> Thanks. 
>>>
>>> Maury 
>>>
>