[Asterisk-doc] Connecting to a PRI

[Gene Naden]

Thank you for reading my doc and thanks for the corrections. :)

----- Original Message ----- 
From: "Mats Karlsson" <mats.o.karlsson at gmail.com>
To: "Discussions regarding The Asterisk Documentation Project"
<asterisk-doc at lists.digium.com>
Sent: Thursday, August 11, 2005 3:23 PM
Subject: Re: [Asterisk-doc] Connecting to a PRI


> Gene Naden wrote:
> > Here is my explanation of the issues involved in connecting to a PRI. I
am
> > open to feedback, corrections, comments. This is a text file with line
> > breaks.
> >
> > Gene Naden, MA
> > Programmer Analyst
> > GlobalTeldata II, LLC
> > 4700 N. Ravenswood
> > Chicago, IL 60640
> > (773) 878-3161 x 223
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Asterisk-Doc mailing list
> > Asterisk-Doc at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-doc
>
> Nice work Gene,
>
> But maybe you could correct the :
>
> A PRI is a 24-channel
> to
> A PRI is a multi channel
>
> And then correct the text in the document to reflect that PRI can be
> either T1 or E1 and that T1 is 24 channels and E1 is 30 channels.
>
>
> And it is RJ48C that is used for connecting T1/E1's, the pinout differs
> to RJ45's but its the same type of 8 pin connector.
>
> Ref. http://www.arcelect.com/RJ48C_and_RJ48S_8_position_jack_.htm
>
>
> /Mats
>
> _______________________________________________
> Asterisk-Doc mailing list
> Asterisk-Doc at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-doc
>