[Asterisk-doc] docs installation.xml,1.5,1.6

[blitzrage]

Comments:
Update of /cvsroot/asterisk/docs
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv31043/docs

Modified Files:
	installation.xml 
Log Message:
blitzrage
- make changes to the description of the TDM400P.
Index: installation.xml
===================================================================
RCS file: /cvsroot/asterisk/docs/installation.xml,v
retrieving revision 1.5
retrieving revision 1.6
diff -C2 -d -r1.5 -r1.6
*** installation.xml	6 May 2004 17:46:01 -0000	1.5
--- installation.xml	6 May 2004 18:59:09 -0000	1.6
***************
*** 89,95 ****
  				The TDM400P is a half-length PCI 2.2 compliant card which allows you to connect
  				standard analog telephones and analog lines to a computer.  The card uses small
! 				modules to activate the 4 ports on the card allowing any port to act as either an
! 				FXO or FXS device.  There is an alternate naming convention used when referencing
! 				the TDM400P.  TDM##B where the first hash is the number of FXS (0-4) interfaces and the
  				second hash is the number of FXO (0-4) interfaces.
  				</para>
--- 89,99 ----
  				The TDM400P is a half-length PCI 2.2 compliant card which allows you to connect
  				standard analog telephones and analog lines to a computer.  The card uses small
! 				modules to activate the 4 ports on the card.  Depending on which daughter card is plugged
! 				onto the board will determine whether the port acts as an FXO or FXSinterface.  The boards
! 				are not selectable between modes; the module used determines the type of interface.
! 				</para>
! 				<para>
! 				There is an alternate naming convention used as well to reference the type of modules attached
! 				to the TDM400P.  This is in the form TDM##B where the first hash is the number of FXS (0-4) interfaces and the
  				second hash is the number of FXO (0-4) interfaces.
  				</para>