[Asterisk-doc] docs common-issues.xml,1.3,1.4 installation.xml,1.17,1.18 introduction.xml,1.12,1.13

[blitzrage]

Comments:
Update of /cvsroot/asterisk/docs
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv23587/docs

Modified Files:
	common-issues.xml installation.xml introduction.xml 
Log Message:
Randy Resnick
- grammatical changes
- information about using contexts in voicemail.conf

blitzrage
- grammatical change... pointed out by Randy... I think :)
Index: common-issues.xml
===================================================================
RCS file: /cvsroot/asterisk/docs/common-issues.xml,v
retrieving revision 1.3
retrieving revision 1.4
diff -C2 -d -r1.3 -r1.4
*** common-issues.xml	11 May 2004 01:23:01 -0000	1.3
--- common-issues.xml	11 Jun 2004 19:46:49 -0000	1.4
***************
*** 201,205 ****
  		<para>
  		SIP phones that support a message waiting indicator (such as a stuttered dial tone or a flashing light)
! 		can be associated with a voicemail box.  In /etc/asterisk/sip.conf, just add a line like
  		<programlisting>
  		mailbox=1234
--- 201,205 ----
  		<para>
  		SIP phones that support a message waiting indicator (such as a stuttered dial tone or a flashing light)
! 		can be associated with a voicemail box.  In <filename>sip.conf</filename>, just add a line like
  		<programlisting>
  		mailbox=1234
***************
*** 209,213 ****
  		<programlisting>
  		mailbox=1234,9999
! 		</programlisting> 
  		</para>
  	</sect1>
--- 209,222 ----
  		<programlisting>
  		mailbox=1234,9999
! 		</programlisting>
! 		</para>
! 		<para>
! 		If a mailbox to be checked is not in the default context in <filename>voicemail.conf</filename>
! 		you must explicitly provide the context as in
! 		<programlisting>
! 		mailbox=1000,2000@smokers,2001@drinkers
! 		</programlisting>
! 		Where mailbox 1000 is in default, 2000 is in a <filename>voicemail.conf</filename> context
! 		called smokers and 2001 is in the context called drinkers.
  		</para>
  	</sect1>
Index: installation.xml
===================================================================
RCS file: /cvsroot/asterisk/docs/installation.xml,v
retrieving revision 1.17
retrieving revision 1.18
diff -C2 -d -r1.17 -r1.18
*** installation.xml	11 Jun 2004 02:20:58 -0000	1.17
--- installation.xml	11 Jun 2004 19:46:49 -0000	1.18
***************
*** 88,92 ****
  			If you are dedicating the computer to Asterisk, free up the most IRQs as
  			possible by disabling USB, serial and parallel port support in the BIOS.
! 			Otherwise, you want to free as many as possible.  You will *not* want to
  			see a NIC sharing an IRQ with a TDM or FXO card!  It's best that these cards
  			have their own IRQ.
--- 88,92 ----
  			If you are dedicating the computer to Asterisk, free up the most IRQs as
  			possible by disabling USB, serial and parallel port support in the BIOS.
! 			Essencially you want to free as many IRQs as possible.  You will *not* want to
  			see a NIC sharing an IRQ with a TDM or FXO card!  It's best that these cards
  			have their own IRQ.
Index: introduction.xml
===================================================================
RCS file: /cvsroot/asterisk/docs/introduction.xml,v
retrieving revision 1.12
retrieving revision 1.13
diff -C2 -d -r1.12 -r1.13
*** introduction.xml	11 Jun 2004 15:02:27 -0000	1.12
--- introduction.xml	11 Jun 2004 19:46:49 -0000	1.13
***************
*** 203,208 ****
  				The X100P and X101P are Foreign Exchange Office (FXO) devices which
  				allow you to connect the Asterisk PBX to a PSTN line.  The only difference
! 				between an X100P and X101P is a slight difference in chips, but makes no difference
! 				to it's operation.  The X100P uses a single PCI slot and supports FXS
  				Loopstart and "Kewlstart" (Loopstart with far end disconnection supervision).
  				With the X100P Asterisk supports both incoming and outgoing calls and
--- 203,209 ----
  				The X100P and X101P are Foreign Exchange Office (FXO) devices which
  				allow you to connect the Asterisk PBX to a PSTN line.  The only difference
! 				between an X100P and X101P is a slight difference in their respective chips, 
! 				but this has no effect on their use with Asterisk.
! 				The X100P uses a single PCI slot and supports FXS
  				Loopstart and "Kewlstart" (Loopstart with far end disconnection supervision).
  				With the X100P Asterisk supports both incoming and outgoing calls and