<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<META content="MSHTML 5.50.4522.1800" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>We're having an issue with connecting a Cisco ITS
installation to * such that DTMF tones are passed to *. DTMF tones aren't
passed to voicemail or to any of the interfaces behind *.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>On the Cisco Side:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>dial-peer voice 8 voip<BR> destination-pattern
9999$<BR> session protocol sipv2<BR> session target
ipv4:172.16.1.249<BR> session transport udp<BR> dtmf-relay
rtp-nte<BR> codec g711ulaw<BR> no vad</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>We have also tried using rtp payload-type nte
to adjust the nte port value to 101 versus 100. SIP Notify doesn't work,
cisco-rtp doesn't work. I have tried every possible dtmfmode= option
[inband, rfc2833, or info] within this SIP device. Toggling session
transport udp, no vad, and the codecs seem to be no use. </FONT><FONT
face=Arial size=2>I'm frustrated and puzzled. If anyone can provide some
guidance, I'd be very grateful! We're trying to get this up and
running this morning.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Josh</FONT></DIV></BODY></HTML>