[asterisk-dev] avoid public IP address in conf

[Francesco Pasqualini]

This is useful even in failover situation where we can setup two WAN
gateway with failover.

If the main go down the second will go up and the external IP will
change....

On Sat, Oct 22, 2016 at 5:22 PM, Joshua Colp <jcolp at digium.com> wrote:

> Francesco Pasqualini wrote:
>
>> With stun, asterisk should be able to get it's dynamic external IP by
>> himself.
>>
>
> That is only part of the problem. It still needs to know when to replace
> information in the SIP signaling with the external IP, which is controlled
> by the local network setting so that would still need to be set.
>
> --
> Joshua Colp
> Digium, Inc. | Senior Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - US
> Check us out at: www.digium.com & www.asterisk.org
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-dev/attachments/20161022/d1548cb3/attachment.html>