[asterisk-dev] [Code Review] 4488: Super Awesome Company: Phase 1 - Patch 2 - Outside Connectivity!

rnewton reviewboard at asterisk.org
Fri Mar 27 16:16:01 CDT 2015


-----------------------------------------------------------
This is an automatically generated e-mail. To reply, visit:
https://reviewboard.asterisk.org/r/4488/
-----------------------------------------------------------

(Updated March 27, 2015, 4:16 p.m.)


Status
------

This change has been marked as submitted.


Review request for Asterisk Developers.


Changes
-------

Committed in revision 433624


Repository: Asterisk


Description
-------

Howdy, here is another patch for the Super Awesome Company configuration. We are still in phase 1. The general requirements are posted on the wiki: https://wiki.asterisk.org/wiki/display/AST/Super+Awesome+Company

The specific requirements this patch meets are below:

pjsip.conf

 * SIP ITSP configuration example and have place holders for the required authentication bits.
 ** Assume that Asterisk does not have a public IP address, and sits behind a NAT with its desk phones.
 * Have outbound registration to the SIP trunk, and an endpoint that represents the SIP trunk.
 * Inbound calls received from the SIP trunk should go into their own context.

extensions.conf

 * Match the outbound dial request so that it can only dial US area codes.
 ** Don't let people dial 900 numbers, international numbers, or any other numbers that could result in a charge
 * Inbound calls from the SIP trunk should hit a basic Auto Attendant that prompts them for the extension to dial, after greeting them to SAC.
 * If an inbound call matches a DID that maps to a specific extension/device, dial that extension/device directly.

Billing

 * Make sure CDRs output all calls that are from/to the SIP trunk. These should be logged to a CSV.
 * For intra-office calls, kill the CDRs.

Additional Requirements Noted:

 * For outbound calls, each SAC employee’s 10-digit DID number is provided as their Caller ID.
 * Voicemail may be accessed remotely by employees who dial 256-555-1234. When employees dial voicemail remotely, they must input both their mailbox number and their pin code.
 * 7, 10 and 10+1 digit dialing for local and long distance calls.
 * Internal dialing of otherwise inbound features, 
 ** 1100 to reach the main IVR.
 * The IVR options possible without getting into Phase 2.


Diffs
-----

  /branches/13/configs/basic-pbx/pjsip.conf 433595 
  /branches/13/configs/basic-pbx/modules.conf 433595 
  /branches/13/configs/basic-pbx/logger.conf 433595 
  /branches/13/configs/basic-pbx/extensions.conf 433595 
  /branches/13/configs/basic-pbx/cdr_custom.conf PRE-CREATION 
  /branches/13/configs/basic-pbx/cdr.conf PRE-CREATION 

Diff: https://reviewboard.asterisk.org/r/4488/diff/


Testing
-------

Setup with a Digium Cloud Services trunk and a few internal phones.
Internal to Internal calls.
Calls Internal to voicemail and other features.
External to internal DID calls.
External to internal feature calls.

Basically tried to call as many ways as I could through all the various features. Everything seemed to work.


Thanks,

rnewton

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-dev/attachments/20150327/647a963b/attachment.html>


More information about the asterisk-dev mailing list