[asterisk-dev] [Code Review] 3976: New module: res_pjsip_phoneprov_provider provides the integration between res_pjsip and res_phoneprov.

[George Joseph]

-----------------------------------------------------------
This is an automatically generated e-mail. To reply, visit:
https://reviewboard.asterisk.org/r/3976/
-----------------------------------------------------------

(Updated Sept. 18, 2014, 3:21 p.m.)


Review request for Asterisk Developers.


Changes
-------

Updated description and cleaned up default processing.


Repository: Asterisk


Description (updated)
-------

This module allows res_pjsip to integrate with res_phoneprov and depends on the res_phoneprov refactor (r3970).

A new pjsip.conf object is defined by this module...

;============EXAMPLE PHONEPROV CONFIGURATION================================

; Before configuring provisioning here, see the documentation for res_phoneprov
; and configure phoneprov.conf appropriately.

; For each user to be autoprovisioned, a [phoneprov] configuration section
; must be created.  At a minimum, the 'type', 'PROFILE' and 'MAC' variables must
; be set.  All other variables are optional.
; Example:

;[1000]
;type=phoneprov               ; must be specified as 'phoneprov'
;endpoint=1000                ; Required only if automatic setting of
                              ; USERNAME, SECRET, DISPLAY_NAME and CALLERID
                              ; are needed.
;PROFILE=digium               ; required
;MAC=deadbeef4dad             ; required
;SERVER=myserver.example.com  ; A standard variable
;TIMEZONE=America/Denver      ; A standard variable
;MYVAR=somevalue              ; A user confdigured variable

; If the phoneprov sections have common variables, it is best to create a
; phoneprov template.  The example below will produce the same configuration
; as the one specified above except that MYVAR will be overridden for
; the specific user.
; Example:

;[phoneprov_defaults](!)
;type=phoneprov               ; must be specified as 'phoneprov'
;PROFILE=digium               ; required
;SERVER=myserver.example.com  ; A standard variable
;TIMEZONE=America/Denver      ; A standard variable
;MYVAR=somevalue              ; A user configured variable

;[1000](phoneprov_defaults)
;endpoint=1000                ; Required only if automatic setting of
                              ; USERNAME, SECRET, DISPLAY_NAME and CALLERID
                              ; are needed.
;MAC=deadbeef4dad             ; required
;MYVAR=someOTHERvalue         ; A user confdigured variable

; To have USERNAME and SECRET automatically set, the endpoint
; specified here must in turn have an outbound_auth section defined.

; Fuller example:

;[1000]
;type=endpoint
;outbound_auth=1000-auth
;callerid=My Name <8005551212>
;transport=transport-udp-nat

;[1000-auth]
;type=auth
;auth_type=userpass
;username=myname
;password=mysecret

;[phoneprov_defaults](!)
;type=phoneprov               ; must be specified as 'phoneprov'
;PROFILE=someprofile          ; required
;SERVER=myserver.example.com  ; A standard variable
;TIMEZONE=America/Denver      ; A standard variable
;MYVAR=somevalue              ; A user configured variable

;[1000](phoneprov_defaults)
;endpoint=1000                ; Required only if automatic setting of
                              ; USERNAME, SECRET, DISPLAY_NAME and CALLERID
                              ; are needed.
;MAC=deadbeef4dad             ; required
;MYVAR=someUSERvalue          ; A user confdigured variable
;LABEL=1000                   ; A standard variable
 
; The previous sections would produce a template substitution map as follows:

;MAC=deadbeef4dad               ;added by pp1000
;USERNAME=myname                ;automatically added by 1000-auth username
;SECRET=mysecret                ;automatically added by 1000-auth password
;PROFILE=someprofile            ;added by defaults
;SERVER=myserver.example.com    ;added by defaults
;SERVER_PORT=5060               ;added by defaults
;MYVAR=someUSERvalue            ;added by defaults but overdidden by user
;CALLERID=8005551212            ;automatically added by 1000 callerid
;DISPLAY_NAME=My Name           ;automatically added by 1000 callerid
;TIMEZONE=America/Denver        ;added by defaults
;TZOFFSET=252100                ;automatically calculated by res_phoneprov
;DST_ENABLE=1                   ;automatically calculated by res_phoneprov
;DST_START_MONTH=3              ;automatically calculated by res_phoneprov
;DST_START_MDAY=9               ;automatically calculated by res_phoneprov
;DST_START_HOUR=3               ;automatically calculated by res_phoneprov
;DST_END_MONTH=11               ;automatically calculated by res_phoneprov
;DST_END_MDAY=2                 ;automatically calculated by res_phoneprov
;DST_END_HOUR=1                 ;automatically calculated by res_phoneprov
;ENDPOINT_ID=1000               ;automatically added by this module
;AUTH_ID=1000-auth              ;automatically added by this module
;TRANSPORT_ID=transport-udp-nat ;automatically added by this module
;LABEL=1000                     ;added by user


Diffs (updated)
-----

  branches/12/res/res_pjsip_phoneprov_provider.c PRE-CREATION 
  branches/12/configs/pjsip.conf.sample 423501 

Diff: https://reviewboard.asterisk.org/r/3976/diff/


Testing
-------

I'm already starting to convert sip peers to pjsip endpoints with no change to my Grandstream templates.


Thanks,

George Joseph

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-dev/attachments/20140918/9467078e/attachment.html>