[asterisk-dev] [Code Review] 3535: bridge_native_rtp: Reconfigure bridge on removal of framehook; don't send re-INVITE to hungup channel

Matt Jordan reviewboard at asterisk.org
Wed May 14 21:10:19 CDT 2014



> On May 13, 2014, 7:40 a.m., Joshua Colp wrote:
> > /branches/12/bridges/bridge_native_rtp.c, lines 233-234
> > <https://reviewboard.asterisk.org/r/3535/diff/1/?file=58431#file58431line233>
> >
> >     I'd add a message SOMEWHERE mentioning this logic, or make it obvious, or something. If someone goes mucking with softhangup flags and this doesn't get changed... it could go badly.
> 
> Matt Jordan wrote:
>     Yeah... I had that same feeling writing this. In fact, after checking again, there's a similar check in bridge_channel which is slightly different (and slightly wrong) - so this really does belong in its own function some place. Probably in bridge_channel.

Ended up adding this to channel, as it doesn't really make sense anywhere else.


- Matt


-----------------------------------------------------------
This is an automatically generated e-mail. To reply, visit:
https://reviewboard.asterisk.org/r/3535/#review11878
-----------------------------------------------------------


On May 13, 2014, 7:11 a.m., Matt Jordan wrote:
> 
> -----------------------------------------------------------
> This is an automatically generated e-mail. To reply, visit:
> https://reviewboard.asterisk.org/r/3535/
> -----------------------------------------------------------
> 
> (Updated May 13, 2014, 7:11 a.m.)
> 
> 
> Review request for Asterisk Developers and Joshua Colp.
> 
> 
> Repository: Asterisk
> 
> 
> Description
> -------
> 
> This patch fixes the currently failing pjsip/transfers/blind_transfer/caller_direct_media test (with a few small tweaks to the test as well).
> 
> The test currently fails primarily for two reasons:
> (1) When Bob and Charlie (the transfer target and the transfer destination) enter a bridge together, the framehook remains on the transfer target channel until both channels are in the bridge. As it consumes voice frames, the initial bridge type is a simple bridge. The framehook is removed when both channels are in the bridge; however, this does not currently cause the bridging framework to re-evaluate the bridge. This patch adds a AST_SOFTHANGUP_UNBRIDGE poke to the transfer target channel when a framehook is removed so the bridge can re-evaluate itself.
> 
> (2) When a channel leaves a native RTP bridge, it may be leaving due to being hung up. Sending a re-INVITE to a channel that is about to be hung up is not nice - in fact, there's a good chance we'll send the BYE request before the channel has had a chance to send back a 200 OK. To be somewhat nicer, this patch makes it so that we only send the re-INVITE if there's a chance the channel will survive the native bridging experience.
> 
> 
> Diffs
> -----
> 
>   /branches/12/main/framehook.c 413786 
>   /branches/12/bridges/bridge_native_rtp.c 413786 
> 
> Diff: https://reviewboard.asterisk.org/r/3535/diff/
> 
> 
> Testing
> -------
> 
> Once some timing issues were removed from the test, it passes with this patch.
> 
> 
> Thanks,
> 
> Matt Jordan
> 
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-dev/attachments/20140515/a526ff31/attachment.html>


More information about the asterisk-dev mailing list