[asterisk-dev] dynamic span only

[Kevin P. Fleming]

On 01/12/2012 10:10 AM, Kaloyan Kovachev wrote:
> The version is trunk ("In dahdi_linux trunk" below). I will try with 2.6
>
> in system.conf i have added:
> dynamic=eth,eth0/00:03:0d:08:d4:74,6,0
> dchan=6
> bchan=1-5
> alaw=1-5
>
> modprobe dahdi_dynamic_eth - loads fine dahdi_dynamic and dahdi
> dahdi_cfg -tvvv output:
> DAHDI Tools Version - SVN-trunk-r10368
>
> DAHDI Version: SVN-trunk-r10397
> Echo Canceller(s): HWEC
> Configuration
> ======================
>
> Dynamic span 1: driver eth, addr eth0/00:03:0d:08:d4:74, channels 6,
> timing 0
>
> Channel map:
>
> Channel 01: Clear channel (A-law) (Echo Canceler: none) (Slaves: 01)
> Channel 02: Clear channel (A-law) (Echo Canceler: none) (Slaves: 02)
> Channel 03: Clear channel (A-law) (Echo Canceler: none) (Slaves: 03)
> Channel 04: Clear channel (A-law) (Echo Canceler: none) (Slaves: 04)
> Channel 05: Clear channel (A-law) (Echo Canceler: none) (Slaves: 05)
> Channel 06: D-channel (Default) (Echo Canceler: none) (Slaves: 06)
>
> 6 channels to configure.
>
> without the -t flag it shows the same, but is then killed:
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
> IP: [<ffffffffa03067d1>] dahdi_sysfs_add_device+0x21/0x60 [dahdi]
>
> at this point module usage shows all 3 as used

Then you've found a bug; you can report it on the issue tracker if you 
like, or you can try tracking it down and post here what you find for 
others to help you.

-- 
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | Skype: kpfleming
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at www.digium.com & www.asterisk.org