[asterisk-dev] Using 5th gen TE420 with Asterisk 1.2?

[Will]

On Thu, Jun 17, 2010 at 8:47 AM, Tony Mountifield <tony at softins.co.uk>wrote:

> (deliberate top-post: original message from asterisk-users included
> below just for reference - there were no replies)
>
> In order to use a 5th gen TE420 with Asterisk 1.2, I have just finished
> porting to Zaptel 1.4 the 5g changes to wct4xxp from Dahdi 2.2.1.2.
> Initial testing looks promising.
>
> I have a couple of questions:
>
> 1. Are there any critical changes for the 5g cards that have only been
> applied to Dahdi 2.3, and not to 2.2? Or am I safe basing my changes
> on Dahdi 2.2? I chose 2.2 over 2.3 because there was a lot of extra
> maintenance-mode code in 2.3 that I didn't need.
>

IIRC, the changes in the 2.2 branch were only enough to get the 5th gen
cards working in a backward compatibility mode.  Only the 2.3 branch
actually takes advantage of the additional capabilities of the 5th gen
firmware.


>
> 2. Is there any interest in my changes, or shall I just use them myself?
>
>
I can't really speak to this as I tend to run latest tag.


> Cheers
> Tony <http://lists.digium.com/mailman/listinfo/asterisk-dev>
>


Will
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20100617/d95538ae/attachment.htm