[asterisk-dev] Libpri - ISDN SETUP called number length

[Ing. Stefano Blasco]

I have divided the problems into different email because i have thought
it was not easy to read and answer with one big email!
Am i wrong?

Tzafrir Cohen ha scritto:
> On Mon, Jul 26, 2010 at 10:40:06AM +0200, Ing. Stefano Blasco wrote:
>   
>> Hi all,
>> as a result of some intensive protocol tests we have found some problem
>> on Libpri/asterisk that i want to share with you;
>> The test environment is Debian stable with asterisk version 1.6.2.8
>> dahdi 2.3.0.1
>> and libpri 1.4.11.2. The cards that we are using are loaded with dahdi
>> kernel modules for PRI (wct4xxp for Openvox D410E) and for BRI (wcb4xxp
>> for Openvox B200E).
>>
>> The problem is:
>> In the ISDN SETUP message the called number must be limited to 20
>> digits, and when you have to send more than 20 digits they must be
>> overlapped using other information units (like it is done in overlap
>> dial). During the test, instead, we have sent 25 digit together and this
>> is a negative result.
>>
>> Do you have any idea?
>>     
>
> Wasn't there an open bug for that? (by you?) I can't find it right now.
>
>