[asterisk-dev] Q.932 ROSE Support libpri

[Richard Mudgett]

----- "Kevin P. Fleming" <kpfleming at digium.com> wrote:

> Degasperi, Matteo wrote:
> > Thank you for your answer,
> > i changed the switchtype to qsig and in libpri/pri_facility.h
> changed
> > the value of ROSE_DIVERTING_LEG_INFORMATION2 from 0x15 to 0x0f
> > 
> > Now I obtain the correct value.
> 
> This is not the first time this problem has been seen; apparently
> there
> are different interpretations of the specification, and some switches
> use 0x15 while others use 0x0f... this seems like a misreading of the
> spec somewhere, where a value of 15 in decimal got accidentally
> interpreted as hexadecimal.

ETSI(EuroISDN) uses 15 (0x0F) for DivertingLegInformation2
Q.SIG uses 21 (0x15) for DivertingLegInformation2

The contents of the messages are not the same even though they have the same name.

Richard