[asterisk-dev] [Code Review] SIP: port configuration

[David Vossel]

-----------------------------------------------------------
This is an automatically generated e-mail. To reply, visit:
https://reviewboard.asterisk.org/r/357/#review1101
-----------------------------------------------------------



/trunk/channels/chan_sip.c
<https://reviewboard.asterisk.org/r/357/#comment2610>

    this is incorrect logic.  addr.sin_port should not be set unless peer->host_dynamic is false.


- David


On 2009-09-21 13:46:26, David Vossel wrote:
> 
> -----------------------------------------------------------
> This is an automatically generated e-mail. To reply, visit:
> https://reviewboard.asterisk.org/r/357/
> -----------------------------------------------------------
> 
> (Updated 2009-09-21 13:46:26)
> 
> 
> Review request for Asterisk Developers.
> 
> 
> Summary
> -------
> 
> In chan_sip.c, build_peer() was built with the assumption that the default port for a peer would always be 5060.  This is not the case when transport=tls.  Now in build_peer() instead of setting the default port at the beginning of the function, the port is cleared until after option parsing is complete.  This allows the correct default port to be set at the end of the function according to what transport type is specified.  If a peer is registered, the peer's port will not be cleared or overridden during a reload.  I also changed the "port" option parsing to check for errors by using sscanf() rather than atoi().
> 
> 
> This addresses bug 15854.
>     https://issues.asterisk.org/view.php?id=15854
> 
> 
> Diffs
> -----
> 
>   /trunk/channels/chan_sip.c 219749 
> 
> Diff: https://reviewboard.asterisk.org/r/357/diff
> 
> 
> Testing
> -------
> 
> made a test call via tls, verified port 5061 is used by default rather than 5060
> 
> 
> Thanks,
> 
> David
> 
>