[asterisk-dev] How to debug DAHDI pseudo timer problem..

[Tilghman Lesher]

On Monday 23 November 2009 19:26:16 Peter Tap wrote:
> Folks,
>
> I have been using Asterisk for quite some time. Recently, I installed the
> latest version of Asterisk on a brand new box. We don't use any digium
> device anymore. Our inbound/outbound calls are through VoicePulse.
>
> All the hard and soft phones are working as expected.
>
> Later, I proceeded to configure MeetMe(). I am using DAHDI pseudo timer for
> it.
>
> The problem I am running into is that after a connection is established to
> the conference room, I get disconnected in a minute or two. Here is the
> output information while running asterisk with a lots of -v option.
>
>   == Using SIP RTP CoS mark 5
>     -- Executing [600 at FromCiscoPhone:1] MeetMe("SIP/101-b7b03298",
> "1234,s1") in new stack == Parsing '/etc/asterisk/meetme.conf':   == Found
>     -- Created MeetMe conference 1023 for conference '1234'
>     -- <SIP/101-b7b03298> Playing 'conf-getpin.ulaw' (language 'en')
>     -- Hungup 'DAHDI/pseudo-1700836616'
>   == Spawn extension (FromCiscoPhone, 600, 1) exited non-zero on
> 'SIP/101-b7b03298'

Looks fairly clear-cut to me.  Conference 1234 has a pin associated with it;
it prompted for the pin, you entered nothing, and it exited for lack of a pin.
This has nothing to do with DAHDI and everything to do with a failure to
follow instructions.

-- 
Tilghman Lesher
Digium, Inc. | Senior Software Developer
twitter: Corydon76 | IRC: Corydon76-dig (Freenode)
Check us out at: www.digium.com & www.asterisk.org