[asterisk-dev] ISDN Cause Code 100, Bosch Integral Management Connection
Wolfgang Pichler
wpichler at yosd.at
Thu Nov 6 22:42:07 CST 2008
Hi,
you can find the log information at http://pastebin.com/m68f1a679
best regards,
Wolfgang
Klaus Darilion schrieb:
> Hi!
>
> can you paste the logfile somewhere with pastebin? It is hardly readable.
>
> klaus
>
> Wolfgang Pichler schrieb:
>
>> Hi all,
>>
>> we have the following setup
>>
>> PSTN 3 PRI Lines <---> Asterisk (1.4.22) <---> Siemens HiCom
>> <---> Bosch Integral
>>
>> The Asterisk Machine does play the man in the middle - and adds some
>> extra functionality to the system (SIP users...) - the normal calls are
>> getting 1:1 through the system (incoming calls from PSTN are handled by
>> a simple Dial(ZAP/g1/${EXTEN}) (g1 = Siemens side) - so no special
>> handling here...
>>
>> Everything is working as it should - beside of one little thing. The
>> Bosch Integral PBX does have a special extension (99) which is used to
>> remote manage the machine - this managment connection is working fine
>> without asterisk, as soon as asterisk is connected in the middle the
>> management connection wont work any more - getting back isdn cause code
>> 100. I have already tried dial options d und c (make it digital - clear
>> channel) - no success.
>>
>> Here is the isdn debug
>>
>>
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: -- Executing
>> [99 at fromPSTN:4] Dial("Zap/19-1", "ZAP/g1/99") in new stack
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: -- Making new call for cr 33240
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: -- Requested transfer
>> capability: 0x08 - DIGITAL
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > Protocol Discriminator:
>> Q.931 (8) len=38
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > Call Ref: len= 2 (reference
>> 472/0x1D8) (Originator)
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > Message type: SETUP (5)
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > [04 03 88 90 bf]
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > Bearer Capability (len= 5) [
>> Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital
>> information (8)
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: >
>> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c:
>> > User information layer 1: Unknown (63)
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > [18 03 a1 83 82]
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > Channel ID (len= 5) [ Ext:
>> 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: >
>> ChanSel: As indicated in following octets
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > Ext:
>> 1 Coding: 0 Number Specified Channel Type: 3
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > Ext:
>> 1 Channel: 2 ]
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > [6c 10 21 81 30 30 38 30 30
>> 31 30 30 31 30 30 33 34 30]
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > Calling Number (len=18) [
>> Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan
>> (E.164/E.163) (1)
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: >
>> Presentation: Presentation permitted, user number passed network
>> screening (1) '00800100100340' ]
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > [70 03 80 39 39]
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: > Called Number (len= 5) [
>> Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '99' ]
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: q931.c:3092 q931_setup: call
>> 33240 on channel 2 enters state 1 (Call Initiated)
>> [Nov 5 08:49:22] VERBOSE[1815] logger.c: -- Called g1/99
>>
>>
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: < Protocol Discriminator:
>> Q.931 (8) len=10
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: < Call Ref: len= 2 (reference
>> 472/0x1D8) (Terminator)
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: < Message type: RELEASE
>> COMPLETE (90)
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: < [08 03 80 e4 04]
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: < Cause (len= 5) [ Ext: 1
>> Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0)
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: < Ext: 1
>> Cause: Invalid information element contents (100), class = Protocol
>> Error (e.g. unknown message) (6) ]
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: < Cause data 1:
>> 04 (4)
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: -- Processing IE 8 (cs0, Cause)
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: q931.c:3724 q931_receive:
>> call 33240 on channel 2 enters state 0 (Null)
>> [Nov 5 08:49:22] VERBOSE[25593] logger.c: -- Channel 0/2, span 5
>> got hangup, cause 100
>>
>>
>> The ZAP Lines comming from PSTN are configured as follows
>> group=0
>> context=from-pstn
>> switchtype = euroisdn
>> signalling = pri_cpe
>> context=fromPSTN
>> internationalprefix = 00
>> nationalprefix = 0
>> localprefix = 0732
>> overlapdial=yes
>> pridialplan=unknown
>>
>>
>> The ZAP Lines going to the Siemens System are configured as follows
>> group=1
>> switchtype = euroisdn
>> signalling = pri_net
>> context=fromPBX
>> internationalprefix = 00
>> nationalprefix = 0
>> localprefix = 0732
>> overlapdial=yes
>> immediate=no
>>
>>
>> The zaptel.conf does contain
>> span=1,1,0,ccs,hdb3,crc4
>> # termtype: te
>> bchan=1-15,17-31
>> dchan=16
>>
>> for each span
>>
>> The system is located in Austria...
>>
>> Can anyone here imagine what could go wrong ?
>>
>> Best regards,
>> Wolfgang
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-dev mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-dev
>>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-dev
>
More information about the asterisk-dev
mailing list