[asterisk-dev] b8zs

[Alex Balashov]

Could it be a bad T1 cable for the cross-connect?  Also, are you using a 
crossover cable?

David Hansen wrote:
> For what reasons would one get BPV errors when timing settings are  
> correct, framing and signaling match on both ends..
> 
> We have our asterisk server set for telco primary timing source, b8zs,  
> esf, pri_cpe, everything works perfect, tried it on a NORTEL pbx same  
> settings, works fine.
> 
> We have a Touchstar PBX that shows BPV errors when hooking up this  
> PRI.  But when we use asterisk as the Network side to Touchstar and  
> provide the exact same setttings as our telco,  Touchstar works fine  
> and shows now BPV errors.
> 
> Is asterisk a little bit forgiving when it comes to b8zs errors?  I  
> guess it would be zaptel, not asterisk.
> 
> If anyone can follow what im saying, do you have any advice for  
> troubleshooting this?
> 
> Thanks.
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev


-- 
Alex Balashov
Evariste Systems
Web    : http://www.evaristesys.com/
Tel    : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599