[asterisk-dev] Porting asterisk to i.mx 27

[Vadim Lebedev]

Stelios,

Thanks a lot for the feedback

Stelios Koroneos wrote:
> Yes meetme needs a 1Khz timming and ztdummy looks at different ways to
> provide that.
> Kernel and RTC are two of them.
> If your board has a way to produce a 1Khz irq then you could use that also
> (you'll need to patch ztdummy but that is rather trivial modification)
>
> As for non x86 system I have tested asterisk/zaptel 1.2 on powerpc (AMCC and
> Freescale), Xscale and MIPS.
>
> Stelios S. Koroneos
>
> Digital OPSiS - Embedded Intelligence
> http://www.digital-opsis.com
>  
>
>   



>> -----Original Message-----
>> From: asterisk-dev-bounces at lists.digium.com 
>> [mailto:asterisk-dev-bounces at lists.digium.com] On Behalf Of 
>> Vadim Lebedev
>> Sent: Monday, July 21, 2008 8:27 PM
>> To: Asterisk Developers Mailing List
>> Subject: [asterisk-dev] Porting asterisk to i.mx 27
>>
>> Hello,
>>
>> I'm in process of porting asterisk and zaptel to an embdedded 
>> platform based on Freescale i.MX27  SOC (ARM based)
>>
>> I'll need meetme functionality on the target, so i need to 
>> have working ztdummy  driver.
>> Reading the source of the driver (and various posts on this 
>> list) it seems that i'll need to fix HZ kernel conf var to 
>> 1000 (instead of 100) for conf calls to work correctly.
>>
>> Is the above analisys correct?
>>
>> Does anybody have experience wirth meetme on embedded (non 
>> X86)  platforms?
>>
>>
>>
>> Thanks
>> Vadim
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register 
>> Now: http://www.astricon.net
>>
>> asterisk-dev mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>>
>>     
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>
>
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20080722/fd884032/attachment-0001.htm