[asterisk-dev] Message type INFORMATION problem

[Miloš Kocbek]

Hi

I am using your 4 port PRI card and have a weird problem and i dont quite
know if this is correct behaviour.

On one PRI port i have PBX and on another there is parlay i60 equipment
which is doing call routing.

I have a problem as you can see below.

I have overlapdial turned on and digits are sent from PBX and when timeout
is reached call is routed parlay i60.
But the problem is that  i receive  Sending Complete message from PBX and
asterisk forward this message as another digit.
digit that is forwarded is the last digit that came with overlapdial.

All this you can see below.

First i receive from PBX

Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < Protocol Discriminator:
Q.931(8)  len=6
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < Call Ref: len= 2 (reference
19775/0x4D3F) (Originator)
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < Message type: INFORMATION (123)

Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < [a1]
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < Sending Complete (len= 1)

and than i send to parlay i60


Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > Protocol Discriminator:
Q.931(8)  len=9
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > Call Ref: len= 2 (reference
3169/0xC61) (Originator)
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > Message type: INFORMATION (123)
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > [70 02 a1 34]
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > Called Number (len= 4) [ Ext: 1
TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163)
(1) '4' ]

i think it should sent last digit but message Sending Complete.

regards
Milos



Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 -- ACKing all packets from 5 to
(but not including) 6
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 -- Since there was nothing left,
stopping T200 counter
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 -- Stopping T203 counter since we
got an ACK
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 -- Nothing left, starting T203
counter
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < Protocol Discriminator:
Q.931(8)  len=6
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < Call Ref: len= 2 (reference
19775/0x4D3F) (Originator)
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < Message type: INFORMATION (123)

Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < [a1]
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < Sending Complete (len= 1)
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 Sending Receiver Ready (16)
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4
> [ 02 01 01 20 ]
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4
> Supervisory frame:
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 > SAPI: 00  C/R: 1 EA: 0
>  TEI: 000        EA: 1
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 > Zero: 0     S: 0 01: 1  [ RR
(receive ready) ]
> N(R): 016 P/F: 0
> 0 bytes of data
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 -- Restarting T203 counter
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 -- Restarting T203 counter
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4
> [ 00 01 0c 20 08 02 0c 61 7b 70 02 a1 34 ]
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4
> Informational frame:
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > N(S): 006   0: 0
> N(R): 016   P: 0
> 9 bytes of data
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 -- Restarting T203 counter
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 Stopping T_203 timer
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 Starting T_200 timer
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > Protocol Discriminator:
Q.931(8)  len=9
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > Call Ref: len= 2 (reference
3169/0xC61) (Originator)
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > Message type: INFORMATION (123)
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > [70 02 a1 34]
Jan 16 11:07:43 VERBOSE[4480] logger.c: 4 > Called Number (len= 4) [ Ext: 1
TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163)
(1) '4' ]
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4
< [ 00 01 01 0e ]
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4
< Supervisory frame:
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
Jan 16 11:07:43 VERBOSE[25650] logger.c: 4 < Zero: 0     S: 0 01: 1  [ RR
(receive ready) ]
< N(R): 007 P/F: 0
< 0 bytes of data
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20080121/29764f52/attachment.htm