[asterisk-dev] parse error in dahdi_cfg?

[David A. Bandel]

On Mon, Aug 25, 2008 at 1:45 PM, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
> On Mon, Aug 25, 2008 at 01:25:28PM -0500, David A. Bandel wrote:
>
>> FYI: the dahdi_genconf still does not work.  echo_can not selected
>> from /etc/dahdi/genconf_parameters and wctdm card seen from
>> dahdi_genconf but modules not seen.
>
> This seems to be because the path to dahdi_cfg is incorrect .
>
> Can you try:
>
>  DAHDI_CFG=/usr/sbin/dahdi_cfg dahdi_genconf

well that produced some interesting results:
root at guaca:/etc/dahdi# DAHDI_CFG=/usr/sbin/dahdi_cfg dahdi_genconf
sh: line 1: 15129 Done                    echo fxsks=2
     15130 Segmentation fault      | /usr/sbin/dahdi_cfg -c /dev/fd/0 > /dev/nu
l 2>&1
sh: line 1: 15135 Done                    echo fxsks=3
     15136 Segmentation fault      | /usr/sbin/dahdi_cfg -c /dev/fd/0 > /dev/nu
l 2>&1
sh: line 1: 15141 Done                    echo fxsks=4
     15142 Segmentation fault      | /usr/sbin/dahdi_cfg -c /dev/fd/0 > /dev/nu
l 2>&1
root at guaca:/etc/dahdi# cat system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Mon Aug 25 16:09:11 2008 -- do no
 hand edit
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER)
fxols=1
echocanceller=mg2,1
# channel 2, WCTDM/4/1, no module.
# channel 3, WCTDM/4/2, no module.
# channel 4, WCTDM/4/3, no module.

# Span 2: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: HRtimer) 1"

# Global data

loadzone        = us
defaultzone     = us

--- end output ----

So it got the first module right, but after that ....


>
> (or update SVN)

Will give that a try shortly.


David A. Bandel
-- 
Focus on the dream, not the competition.
 - Nemesis Air Racing Team motto