[asterisk-dev] Blind Transfer is not working in incoming calls

[Fernando Urzedo]

Hi Max,
 
Please make sure you are setting the Dial command with parameters "T" and "t". I would say you are missing "t"...
 
Regards!

________________________________

From: asterisk-dev-bounces at lists.digium.com [mailto:asterisk-dev-bounces at lists.digium.com] On Behalf Of Max Alex
Sent: sábado, 23 de agosto de 2008 03:53
To: asterisk-dev at lists.digium.com
Subject: [asterisk-dev] Blind Transfer is not working in incoming calls


Hi Everybody,
i have installed asterisk 1.4.19 on my box,
I have setup agi script which is used while incoming and outgoing calls.
It will find the users for incoming and calls to them which is registered in asterisk,
I have a setup *# for blind transfer to call any outbound or inbound numbers.
when i am calling any outbound call and the calls are connected with my sip peer, then i am pressing *# for blind transfer, it will ask me to enter the transfer number and it is working,
But when an incoming call to my sip user and they are connected the *# is not worked even the transfer prompt is also played, and dtmf is also set properly.

But i am not getting why the incoming call is not transfer to any other number?
Please help for this issue!


-- 
Thanks,
Max Alex
Voip Developer


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20080825/5412a16d/attachment.htm