[asterisk-dev] Register chan_ss7 as channel driver

[Hoai-Anh Ngo-Vi]

Hi,

chan_ss7.so is loaded. I get incoming calls from the PSTN. Chan_ss7 CLI
commands as you can see when typing "help ss7" work. I was also able to
watch the signalling links going up on the CLI after asterisk has started.

I get reload-not-supported message while trying "module reload chan_ss7.so".

No error found in ss7.conf

Thank you
>
> It works well both way for * 1.4.2 but as I tried it with 1.4.4 I got
> problem making outbound calls. See below
>
>
>
>   -- Executing [1000 at default:3] Dial("SIP/192.168.178.251-081ffab0",
> "ss7/siuc/6974223663") in new stack
>
> [Oct  2 18:59:38] WARNING[2539]: channel.c:3099 ast_request: No channel
> type
> registered for 'ss7'
>
> [Oct  2 18:59:38] WARNING[2539]: app_dial.c:1099 dial_exec_full: Unable to
> create channel of type 'ss7' (cause 66 - Channel not implemented)

Hi,
Have you tried the CLI command "module load chan_ss7.so" yet? Maybe your
module is not loaded. If it is loaded, can you show us the error message
when you reload this channel? Also check the chan_ss7 configuration file,
if there is any error in it, chan_ss7 can refuse to load too.
Hope this help.

Regards.


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev