[asterisk-dev] make a call with IP address

[pandi ponnangan]

This one is an developement question.....
we are trying to establish a connection using MANAGER API..

On Mon, 02 Apr 2007 Steve Totaro wrote :
>This is a user's list question.
>
>Thanks,
>Steve Totaro
>
>
>
>   _____
>
> From: asterisk-dev-bounces at lists.digium.com
>[mailto:asterisk-dev-bounces at lists.digium.com] On Behalf Of pandi
>ponnangan
>Sent: Monday, April 02, 2007 5:28 AM
>To: asterisk-dev at lists.digium.com
>Subject: [asterisk-dev] make a call with IP address
>
>
>
>
>Hello all,
>
>We are setting up a gateway in which the SIP devices will be connected
>dynamically using the Asterisk system.
>
>We use the originate Manager API command from our code to call an IP as
>(SIP/1 at 10.20.30.40). The call rings on the phone and goes through the
>normal (default) context and finally hangs up(WARNING[13833]: pbx.c:2415
>__ast_pbx_run: Timeout, but no rule 't' in context 'GTW'
>). Want we want to do it originate a simular call to another device say
>SIP/2 at 10.20.30.50 and bridge the two connections.
>
>Can we expect some hints to move further to establish the call between
>SIP/1 and SIP/2. We are not interested in creating static entries in the
>.conf files, but open to use Manager API to build the system on-the-fly.
>
>All we want from the experts is that to validate our logic whether it is
>feasible to build up the communication system using the above technique
>and suggest us the best way to go about.
>
>
>regards,
>Pandi.P
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20070402/12dec2b8/attachment.htm