[asterisk-dev] Re: FastAGI behaviour in trunk changed recently?

[Kaloyan Kovachev]

On Fri, 28 Jul 2006 15:58:49 +0100, Alistair Cunningham wrote
> Kaloyan Kovachev wrote:
> > if your verbose level is at least 2 you should get a message "== Spawn
> > extension (_context_, _extension_, _priority_) exited non-zero on _channel_"
> > on hangup and if there are timestamps it should be enough to find where and
> > when the call ends.
> 
> I don't see that message, but it did give me a clue. After hanging 
> up on the calling phone, the channels stay active:
> 
> host217-37-242-113*CLI> show channels
> Channel              Location             State   Application(Data)
> 
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> SIP/217.37.242.113-0 07870699479 at to-voipt Ring 
> AGI(agi://127.0.0.1/start?styp
> 11 active channels
> 11 active calls
> 
> Taking one at random:
> 
> host217-37-242-113*CLI> show channel SIP/217.37.242.113-08f77de8
>   -- General ---113*CLI>
>             Name: SIP/217.37.242.113-08f77de8
>             Type: SIP
>         UniqueID: 1154098442.10
>        Caller ID: 08458684633
>   Caller ID Name: Alistair Cunningham
>      DNID Digits: 07870699479
>            State: Ring (4)
>            Rings: 0
>    NativeFormats: 0x4 (ulaw)
>      WriteFormat: 0x4 (ulaw)
>       ReadFormat: 0x4 (ulaw)
>   WriteTranscode: No
>    ReadTranscode: No
> 1st File Descriptor: 79
>        Frames in: 1
>       Frames out: 0
>   Time to Hangup: 1154184842
>     Elapsed Time: 0h0m36s
>    Direct Bridge: <none>
> Indirect Bridge: <none>
>   --   PBX   --
>          Context: to-voiptalk
>        Extension: 07870699479
>         Priority: 0
>       Call Group: 0
>     Pickup Group: 0
>      Application: AGI
>             Data: 
> agi://127.0.0.1/start?stype=phone&snumber=&cnumber=07870699479&scustomer=
>      Blocking in: (Not Blocking)
>    CDR Variables:13*CLI>
> level 1: clid="Alistair Cunningham" <123402>
> level 1: src=123402
> level 1: dst=07870699479
> level 1: dcontext=from-internal
> level 1: channel=SIP/217.37.242.113-08f77de8
> level 1: lastapp=SetCallerPres
> level 1: lastdata=allowed
> level 1: start=2006-07-28 15:54:02
> level 1: answer=2006-07-28 15:54:02
> level 1: end=2006-07-28 15:54:02
> level 1: duration=0
> level 1: billsec=0
> level 1: disposition=NO ANSWER
> level 1: amaflags=DOCUMENTATION
> level 1: uniqueid=1154098442.10
> 
> It's interesting that it's showing the Application being AGI with 
> the data from before the SET CONTEXT, which clearly this cannot be 
> correct as there is no such AGI data in [to-voiptalk].
> 
yes it is still in the AGI and will be transfered on exit see "
         Context: to-voiptalk
      Extension: 07870699479
       Priority: 0 
" - the next will be priority 1, just AGI never exits even it says so, which
is definitely a bug

> Alistair Cunningham,
> Integrics Ltd,
> +44 20 799 39 799
> http://integrics.com/
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev