[asterisk-dev] RDNIS not set on diverted incoming calls?

[Roy Sigurd Karlsbakk]

this was not because of that, but because rdnis is write-only in 1.2.  
this fixed it:

roy

Index: channels/chan_zap.c
===================================================================
--- channels/chan_zap.c (revision 333)
+++ channels/chan_zap.c (working copy)
@@ -2029,6 +2029,8 @@
                 int prilocaldialplan;
                 int ldp_strip;
                 int exclusive;
+               const char *rr_str;
+               int redirect_reason;
                 c = strchr(dest, '/');
                 if (c)
@@ -2135,8 +2137,24 @@
                 }
                 pri_sr_set_caller(sr, l ? (l + ldp_strip) : NULL, n,  
prilocaldialplan,
                                   p->use_callingpres ? ast- 
 >cid.cid_pres : (l ? PRES_ALLOWED_USER_NUMBER_PASSED_SCREEN :  
PRES_NUMBER_NOT_AVAILABLE));
-               pri_sr_set_redirecting(sr, ast->cid.cid_rdnis, p->pri- 
 >localdialplan - 1, PRES_ALLOWED_USER_NUMBER_PASSED_SCREEN,  
PRI_REDIR_UNCONDITIONAL);
+               redirect_reason = PRI_REDIR_UNCONDITIONAL;
+               if ((rr_str = pbx_builtin_getvar_helper(ast,  
"PRIREDIRECTREASON"))) {
+                       if (!strcasecmp(rr_str, "UNKNOWN"))
+                               redirect_reason = PRI_REDIR_UNKNOWN;
+                       else if (!strcasecmp(rr_str, "BUSY"))
+                               redirect_reason =  
PRI_REDIR_FORWARD_ON_BUSY;
+                       else if (!strcasecmp(rr_str, "NO_REPLY"))
+                               redirect_reason =  
PRI_REDIR_FORWARD_ON_NO_REPLY;
+                       else if (!strcasecmp(rr_str, "DEFLECTION"))
+                               redirect_reason = PRI_REDIR_DEFLECTION;
+                       else if (!strcasecmp(rr_str,  
"DTE_OUT_OF_ORDER"))
+                               redirect_reason =  
PRI_REDIR_DTE_OUT_OF_ORDER;
+                       else if (!strcasecmp(rr_str,  
"FORWARDED_BY_DTE"))
+                               redirect_reason =  
PRI_REDIR_FORWARDED_BY_DTE;
+               }
+               pri_sr_set_redirecting(sr, ast->cid.cid_rdnis, p->pri- 
 >localdialplan - 1, PRES_ALLOWED_USER_NUMBER_PASSED_SCREEN,  
redirect_reason);
+
#ifdef SUPPORT_USERUSER
                 /* User-user info */
                 useruser = pbx_builtin_getvar_helper(p->owner,  
"USERUSERINFO");

On 2. des. 2006, at 09.50, Paul Cadach wrote:

> Hello,
>
> This is probably because of mis-configuration of your PRI zap span  
> (wrong switchtype, etc.). Which version of
> asterisk/libpri do you use?
>
>
> WBR,
> Paul.
>
> ----- Original Message -----
> From: "Roy Sigurd Karlsbakk" <roy at karlsbakk.net>
> To: "Asterisk Mailing List" <asterisk-dev at lists.digium.com>
> Cc: "Mikael Bjerkland" <mikael at upnet.lt>
> Sent: Tuesday, November 07, 2006 4:02 AM
> Subject: [asterisk-dev] RDNIS not set on diverted incoming calls?
>
>
>> hi all
>>
>> when diverting a call from some phone to a number connected to my *
>> box, * does not decode  the incoming RDNIS. PRI debug shows the
>> number, but only as hex. Is this meant to be this way?
>>
>> thanks
>>
>> roy
>>
>> PRI DEBUG:
>> < Protocol Discriminator: Q.931 (8)  len=77
>> < Call Ref: len= 2 (reference 5568/0x15C0) (Originator)
>> < Message type: SETUP (5)
>> < [04 03 80 90 a3]
>> < Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
>> capability: Speech (0)
>> <                              Ext: 1  Trans mode/rate: 64kbps,
>> circuit-mode (16)
>> <                              Ext: 1  User information layer 1: A-
>> Law (35)
>> < [18 03 a1 83 81]
>> < Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
>> Preferred Dchan: 0
>> <                        ChanSel: Reserved
>> <                       Ext: 1  Coding: 0   Number Specified
>> Channel Type: 3
>> <                       Ext: 1  Channel: 1 ]
>> < [1c 24 91 a1 21 02 01 25 02 01 0f 30 19 02 01 01 0a 01 01 a1 11 a0
>> 0f a1 0d 0a 01 00 12 08 34 38 38 36 39 34 34 30]
>> < Facility (len=38, codeset=0) [ 0x91, 0xa1, 0x21, 0x02, 0x01, 0x25,
>> 0x02, 0x01, 0x0f, '0', 0x19, 0x02, 0x01, 0x01, 0x0a, 0x01, 0x01,
>> 0xa1, 0x11, 0xa0, 0x0f, 0xa1, 0x0d, 0x0a, 0x01, 0x00, 0x12, 0x08,
>> '48869440' ]
>> < [6c 0a 21 83 39 38 30 31 33 33 35 36]
>> < Calling Number (len=12) [ Ext: 0  TON: National Number (2)  NPI:
>> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>> <                           Presentation: Presentation allowed of
>> network provided number (3) '98013356' ]
>> < [70 09 a1 32 31 39 37 33 35 39 39]
>> < Called Number (len=11) [ Ext: 1  TON: National Number (2)  NPI:
>> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '21973599' ]
>> < [a1]*CLI>
>>
>> --
>> Roy Sigurd Karlsbakk
>> roy at karlsbakk.net
>> -------------------------------
>> MICROSOFT: Acronym for "Most Intelligent Customers Realise Our
>> Software Only Fools Teenagers"
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-dev mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
>
> !DSPAM:45713e86253537650217951!
>
>
>

---
Roy Sigurd Karlsbakk
roy at karlsbakk.net
---------------------------------
Those people who think they know everything are a great annoyance to  
those of us who do. (Isaac Asimov)