[Asterisk-Dev] Problem with libpri connecting to a NI2
Timothy Costello
tim at cteusa.com
Wed May 11 16:33:04 MST 2005
Hi;
With the recent change in channel zap / zaptel / libpri to more
debugging I decide to upgrade all of the above. Now I can't make
outgoing calls on my PRI. I don't know what to even begin to look at
really but here is a pri intense debug of the problem. Meanwhile I will
be reverting to an older working libpri/asterisk.
If anyone has any ideas please e-mail me. This was a working config
prior to the upgrade, no config options were changed.
Thanks;
Tim
pri intense debug span 1
Enabled EXTENSIVE debugging on span 1
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 026 P/F: 1
< 0 bytes of data
-- ACKing all packets from 25 to (but not including) 26
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
-- Executing SetAccount("SIP/tim-b5ba", "4224") in new stack
-- Executing SetCallerPres("SIP/tim-b5ba", "allowed") in new stack
-- Executing Dial("SIP/tim-b5ba", "Zap/G1/18475550986|300") in new
stack
-- Requested transfer capability: 0x00 - SPEECH
asterisk*CLI>
> [ 00 01 34 36 08 02 00 02 05 04 03 80 90 a2 18 03 a9 83 97 1c 22 9f
aa 06 80 01 00 82 01 00 8b 01 00 a1 14 02 01 02 02 01 00 80 0c 54 69 6d
20 43 6f 73 74 65 6c 6c 6f 1e 02 80 83 28 0d b1 54 69 6d 20 43 6f 73 74
65 6c 6c 6f 6c 0c 00 83 38 34 37 37 35 39 34 32 32 34 70 0c 80 31 38 34
37 33 37 35 30 39 38 36 ]
asterisk*CLI>
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 026 0: 0
> N(R): 027 P: 0
> 98 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=98
> Call Ref: len= 2 (reference 2/0x2) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps,
circuit-mode (16)
> Ext: 1 User information layer 1: u-Law
(34)
> [18 03 a9 83 97]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel
Type: 3
> Ext: 1 Channel: 23 ]
> [1c 22 9f aa 06 80 01 00 82 01 00 8b 01 00 a1 14 02 01 02 02 01 00 80
0c 54 69 6d 20 43 6f 73 74 65 6c 6c 6f]
> Facility (len=36, codeset=0) [ 0x9f, 0xaa, 0x06, 0x80, 0x01, 0x00,
0x82, 0x01, 0x00, 0x8b, 0x01, 0x00, 0xa1, 0x14, 0x02, 0x01, 0x02, 0x02,
0x01, 0x00, 0x80, 0x0c, 'Tim', 0x20, 'Costello' ]
> [1e 02 80 83]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
(0) 0: 0 Location: User (0)
> Ext: 1 Progress Description: Calling
equipment is non-ISDN. (3) ]
> [28 0d b1 54 69 6d 20 43 6f 73 74 65 6c 6c 6f]
> Display (len=13) Charset: 31 [ Tim Costello ]
> [6c 0c 00 83 38 34 37 35 35 35 34 32 32 34]
> Calling Number (len=14) [ Ext: 0 TON: Unknown Number Type (0) NPI:
Unknown Number Plan (0)
> Presentation: Presentation allowed of
network provided number (3) '8475554224' ]
> [70 0c 80 31 38 34 37 35 35 35 30 39 38 36]
> Called Number (len=14) [ Ext: 1 TON: Unknown Number Type (0) NPI:
Unknown Number Plan (0) '18475550986' ]
-- Called G1/18475550986
< [ 00 01 01 36 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 027 P/F: 0
< 0 bytes of data
-- ACKing all packets from 25 to (but not including) 27
-- ACKing packet 26, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
asterisk*CLI>
< [ 02 01 36 36 08 02 80 02 5a 08 02 82 b2 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 027 0: 0
< N(R): 027 P: 0
< 9 bytes of data
-- ACKing all packets from 26 to (but not including) 27
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 2/0x2) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 02 82 b2]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Public network serving the local user (2)
< Ext: 1 Cause: Facility not subscribed (50), class =
Service or Option not Available (3) ]
Sending Receiver Ready (28)
> [ 02 01 01 38 ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 028 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
-- Channel 0/23, span 1 got hangup
-- Hungup 'Zap/23-1'
== No one is available to answer at this time (1:0/0/0)
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (28)
> [ 00 01 01 39 ]
> Supervisory frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 028 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
asterisk*CLI>
< [ 00 01 01 37 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 027 P/F: 1
< 0 bytes of data
-- ACKing all packets from 26 to (but not including) 27
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
-- Timeout on SIP/tim-b5ba
== CDR updated on SIP/tim-b5ba
-- Executing Hangup("SIP/tim-b5ba", "") in new stack
== Spawn extension (internal, t, 1) exited non-zero on 'SIP/tim-b5ba'
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (28)
More information about the asterisk-dev
mailing list