[Asterisk-Dev] PRI Q.921 problem (zapata.conf and zaptel.conf configurations )

[Matt]

zaptel.conf: 

only 1st span is connected and used for testing.

span=1,1,0,ccs,hdb3
span=2,0,0,ccs,hdb3
span=3,0,0,ccs,hdb3
span=4,0,0,ccs,hdb3

bchan=1-15
dchan=16
bchan=17-31
loadzone = us
defaultzone=us

zapata.conf:
[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1

[channels]
language=en
context=default

switchtype=euroisdn
overlapdial=yes
usecallerid=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
immediate=no
busycount=6
musiconhold=default
context=default
callerid="M100" <(666) 888-8888>
channel => 1-15
channel => 17-31




  ----- Original Message ----- 
  From: Dpto. Técnico. 
  To: Asterisk Developers Mailing List 
  Sent: Thursday, July 14, 2005 3:59 AM
  Subject: Re: [Asterisk-Dev] PRI Q.921 problem


  Can you put the zapata.conf and zaptel.conf configurations file?

  Regards.
    ----- Original Message ----- 
    From: Matt 
    To: Asterisk-Users at lists.digium.com 
    Cc: Asterisk Developers Mailing List 
    Sent: Thursday, July 14, 2005 10:55 AM
    Subject: [Asterisk-Dev] PRI Q.921 problem


    hi guys:

    we are having Q.921 DLPI problem when trying to establish ISDN layer 2 connection with the E1 switch of the telecom carrier, the carrier switch is unable to establish layer 2 link with our * server with a quad E1 card, 

    Here is a trace provided by telecom.

    U   -> N     DL_RELEASE_IND 

    U   <-  N    (PRA_PROTOCOL_CONFIG) 

    U    <- N    DL_ESTABLISH_REQ 

    look like this DL_RELEASE_IND is part of Q.921, but i don't see this in libPRI, is the LIBPRI implementation missing the DLPI part of the Q.921? I also found some free code of Q.921 Q931 on the net, Linux and FreeBSD seams also contains this DLPI in their isdn drivers.

    reading the libpri code, it tells it is doing the ua only, no DLPI, shall we add DLPI or we can tell teleco to only use ua layer 2 link establishment?

    Any hint of help is greatly appreciated.

    Matt


----------------------------------------------------------------------------


    _______________________________________________
    Asterisk-Dev mailing list
    Asterisk-Dev at lists.digium.com
    http://lists.digium.com/mailman/listinfo/asterisk-dev
    To UNSUBSCRIBE or update options visit:
       http://lists.digium.com/mailman/listinfo/asterisk-dev


------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Dev mailing list
  Asterisk-Dev at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-dev
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20050714/1800738c/attachment.htm