[Asterisk-Dev] Re: Hardware details for the Digium TDM400P

[Andy Martin]

Hi,

I've been having a lot of trouble with a clone version of the X100P on a 
VIA EPIA-V.
It sure looks like it is related to the VIA PCI implementation on the 
motherboard.

You can get all the details from my post this morning "X100p on VIA 
EPIA-V"  If you go this route, I encourage you to
test the TDM400P card in the motherboard with the phone-lines connected 
for 48hrs or so while you are still able to
return the board.

If you get this configuration working, I'd really like to hear about 
it.  I cannot figure out which component to try replacing first - the 
motherboard or the X100P

Cheers,
A.


Andrew Kohlsmith wrote:

>On Saturday 18 September 2004 21:35, list at asd-group.com wrote:
>  
>
>>It has to go in a Via EPIA system with their C3 (Nehemiah core) processor
>>at 1.2ghz (with full speed FPU). That's supposed to be equivalent to a
>>similarly clocked P3 or Celeron.
>>    
>>
>
>I ran a TDM410P and an X101P on a P90MMX; it worked just fine with the 
>exception that it could not handle iLBC due to the superior lack of 
>horsepower.
>
>  
>
>>Will than be enough grunt for the TDM400P to power a SOHO system with one
>>telco line and three internal extensions (ie one FXO and three FXS
>>modules)?
>>    
>>
>
>Should be *plenty*.  You really need to test though to be sure.
>
>-A.
>_______________________________________________
>Asterisk-Dev mailing list
>Asterisk-Dev at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-dev
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-dev
>
>  
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20040919/b065cb8c/attachment.htm