[Asterisk-Dev] Hardware details for the Digium TDM400P

[Greg Boehnlein]

On Sun, 19 Sep 2004, Andrew Kohlsmith wrote:

> On Saturday 18 September 2004 21:35, list at asd-group.com wrote:
> > It has to go in a Via EPIA system with their C3 (Nehemiah core) processor
> > at 1.2ghz (with full speed FPU). That's supposed to be equivalent to a
> > similarly clocked P3 or Celeron.
> 
> I ran a TDM410P and an X101P on a P90MMX; it worked just fine with the 
> exception that it could not handle iLBC due to the superior lack of 
> horsepower.
> 
> > Will than be enough grunt for the TDM400P to power a SOHO system with one
> > telco line and three internal extensions (ie one FXO and three FXS
> > modules)?
> 
> Should be *plenty*.  You really need to test though to be sure.

I run an X100P on a P133 w/ 16 megs of ram every day. All calls in and out 
of my house go through it, via a Sipura SPA-2000 and both Cisco and SNOM 
VoIP phones. It can easily handle about 7 concurrent, non-transcoded calls 
without any problem whatsoever. I can do about 4 Ulaw to g726 calls before 
I start dropping frames.

-- 
    Vice President of N2Net, a New Age Consulting Service, Inc. Company
         http://www.n2net.net Where everything clicks into place!
                             KP-216-121-ST