[Asterisk-Dev] Help Asterisk can't call mobiles

[Adam Goryachev]

On Wed, 2004-03-10 at 19:33, Rick.Bates at kaz-group.com wrote:
> Hello from down under,
> 
> Background:
> We are located in Sydney, Australia, and are using two TE410P cards in a
> Dual Athlon 2600 box as the PBX.  Span 1 is connected to an ISDN-PRI

I'm in Sydney/Aus as well... you can call me if you want some help phone
number below (free of course :)

> # Channels 22-31 are not used as ISDN span only uses first
> # twenty channels as per the OnRamp20 Service
> # span 1
> bchan=1-15,17-21
> # unused b channels

Try "unused=22-31" not a big deal I think, but more appropriate
perhaps...

> bchan=22-31
> dchan=16
> 
> # speech server - Dialogic JCT600
> # span 2
> bchan=32-46,48-62
> dchan=47
> 

> zapata.conf:
> ************
> [channels]
> busydetect=yes
> busycount=8
> 
> relaxdtmf=yes
> 
> callprogress=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> adsi=yes
> 

should adsi=no ?? If you don't use adsi phones, why would you have it
on?

> usecallerid=yes
> hidecallerid=no
> callerid=asrecieved
> calleridcallwaiting=yes
> usecallingpres=yes
> 
> echocancel=no
> echocancelwhenbridged=no
> echotraining=no
> 

I have these three as yes

> switchtype=euroisdn

Try pridialplan=local

> pridialplan=national
> overlapdial=yes
> 

I think in general the only thing you need to change is the pridialplan
above.... Once you get it working, let me know what your call quality is
like calling mobiles (from the mobile phone end) 'cos mine is not very
good at all :( I'm sending a message out once I get through my emails
here :)

If you want my complete configs, or need more help, feel free to
call/email me.

Regards,
Adam

-- 
 -- 
Adam Goryachev
Website Managers
Ph:  +61 2 9345 4395                        adam at websitemanagers.com.au
Fax: +61 2 9345 4396                        www.websitemanagers.com.au