[Asterisk-Dev] Raising loop current limit on the Proslic (reg.71)

[Alfred R. Nurnberger]

Actually SiLabs specifies only 100 volt caps in their App notes.
The ProSlic regulates the dc/dc converter voltage very good, so 94.5 volts
is
still 5.5% below the nominal capacitor voltage whch should work fine.

Regards.
Alfred R. Nurnberger
F L O S Y S
Making Communications Flow
US Tel:   +1 (503) 972-9300
UK Tel:  +44 (118) 321-6304
DE Tel:  +49 (911)3083-9316
Fax:      +1 (503) 972-9309
US Toll Free: 1-877-4FLOSYS
http://www.flosys.com


-----Original Message-----
From: asterisk-dev-admin at lists.digium.com
[mailto:asterisk-dev-admin at lists.digium.com]On Behalf Of Andrew
Kohlsmith
Sent: Monday, March 08, 2004 3:31 PM
To: asterisk-dev at lists.digium.com
Subject: Re: [Asterisk-Dev] Raising loop current limit on the Proslic
(reg.71)


> The Silicon Labs application note AN33 for neon flashing sets Vbath to
> 94.5 V.

That's fine, the SiLabs guy writing the appnote probably specced 150V
caps..  :-)  Mind you I bet you could break out the soldering iron and fix
that problem anyway...

Regards,
Andrew
_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-dev
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev