[Asterisk-Dev] quadBRI installation problem

[GIBERT Frédéric]

Here are all my versions:

Gcc-3.2.2-5
Glibc-2.3.2-11.9
Kernel-source-2.4.20-8
RedHat9.0

Tks


-----Message d'origine-----
De : asterisk-dev-admin at lists.digium.com
[mailto:asterisk-dev-admin at lists.digium.com] De la part de Michael
Sandee
Envoyé : mardi 1 juin 2004 10:34
À : asterisk-dev at lists.digium.com
Objet : Re: RE : [Asterisk-Dev] quadBRI installation problem

Gibert,

It helps specifying system details...

Such as... running kernel version, gcc version, glibc version, distro 
version, ...
version of linux kernel in /usr/src/linux-2.4/...

If you are able to use irc please join us at irc.freenode.org... That is

a lot easier for doing quick (interactive) debugging of your problem.

Did you compile the zaptel included in the zapbri patch? (using 
./install.sh is easier and usually works... although it has too little 
debugging at this time, but it is something being worked on)

Michael.


GIBERT Frédéric wrote:

> Does someone get an answer for this problem?
>
> Thanks.
>
> -----Message d'origine-----
> *De :* asterisk-dev-admin at lists.digium.com 
> [mailto:asterisk-dev-admin at lists.digium.com]*De la part de* GIBERT 
> Frédéric
> *Envoyé :* lundi 31 mai 2004 11:50
> *À :* asterisk-dev at lists.digium.com
> *Objet :* [Asterisk-Dev] quadBRI installation problem
>
> Hello,
>
> I have just installed a new version of asterisk with quadBRI from 
> Junghanns, but I have some compilation problem.
>
> I have downloaded the bri-stuff.0.0.2 from Junghanns website, and when

> I try to install the qozap driver, I run into troubles!
>
> I do a “make load”, and here is the result:
>
> [root at connecteur02 qozap]# make load
>
> cc -c qozap.c -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB 
> -fomit-frame-pointer -O2 -Wall -I/usr/src/linux-2.4/include 
> -I../zaptel -DMODVERSIONS -include 
> /usr/src/linux-2.4/include/linux/modversions.h
-DCONFIG_ZAPATA_BRI_DCHANS
>
> qozap.c: In function `qoz_fifo_tx':
>
> qozap.c:204: structure has no member named `bytes2transmit'
>
> qozap.c:209: structure has no member named `eoftx'
>
> qozap.c:215: structure has no member named `bytes2transmit'
>
> qozap.c:220: structure has no member named `bytes2transmit'
>
> qozap.c:227: structure has no member named `eoftx'
>
> qozap.c: In function `qoz_prepare_rx':
>
> qozap.c:359: structure has no member named `bytes2receive'
>
> qozap.c:362: structure has no member named `eofrx'
>
> qozap.c:365: structure has no member named `eofrx'
>
> qozap.c:368: structure has no member named `bytes2receive'
>
> qozap.c:369: structure has no member named `eofrx'
>
> qozap.c: In function `qoz_run':
>
> qozap.c:387: structure has no member named `bytes2receive'
>
> qozap.c:388: structure has no member named `bytes2transmit'
>
> qozap.c:389: structure has no member named `eofrx'
>
> qozap.c:390: structure has no member named `eoftx'
>
> qozap.c: In function `ztqoz_startup':
>
> qozap.c:604: `ZT_FLAG_BRIDCHAN' undeclared (first use in this
function)
>
> qozap.c:604: (Each undeclared identifier is reported only once
>
> qozap.c:604: for each function it appears in.)
>
> make: *** [qozap.o] Error 1
>
> [root at connecteur02 qozap]#
>
> Does someone get an idea?
>
> Thanks.
>

_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-dev
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev