[Asterisk-Dev] T1 & PBX

TC trclark at shaw.ca
Thu Jan 29 08:52:46 MST 2004

post relevent extensions.conf, zapata.conf
  ----- Original Message ----- 
  From: Ed Devine 
  To: asterisk-dev at lists.digium.com 
  Sent: Thursday, January 29, 2004 7:36 AM
  Subject: [Asterisk-Dev] T1 & PBX

  Does anyone have any experience with a Digium T410P over T1's using a Norstar?

  I'm developing Asterisk for use as a replacement/backup phone switch. The Norstar is in the loop only as a temporary development tool, and will not be used in the final product. I've been trying to route calls in and out of asterisk via the Norstar as it allows access to readily available phones and existing extensions etc... 

  Inbound to asterisk from a nortel phone 

  I get a message on the console 

  "starting simple switch on Zap/NN-1 (where NN-1 is the T1 group attached to the Norstar) and (subsequently) "Unknown extension 'X' in context 'blah' that 'X' (where 'X' is the first number dialed, regardless of what I dial, and where 'blah' is the context entered in zapata.conf). 

  When I do a dial command from the console to the same dialstring, the call appears to route and the appropriate phone on the Norstar rings. I've even left the 'dmo' stuff intact as a test, and find that I can access the demo features from the Norstar, even the IAX features seem to route correctly, but when I get to my extensions, poof.

  Any suggestions or pointers would be appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20040129/aa4428b4/attachment.htm

More information about the asterisk-dev mailing list