[Asterisk-Dev] X100P technical details

[Victor Rini]

The card is basically a winmodem. A PCI bus interface with a Direct 
Access Arrangement (DAA) behind it.

Try 
http://www.tjnet.com/software/download/data_sheets/Tiger320_data_sheet.pdf 
for the PCI bus interface and

http://www.silabs.com/products/wireline/si3034_documentation.asp

for the DAA.

The PCI bus interface chips on the variations of the card should all be 
compatible in that they support the PCI standard the same way.

However the DAA should be consistent between the Digium card variations 
and the acceptable clones, i.e. a Silicon Labs DAA. Am I right about 
that group?

Have you got the endianess issues worked out?


Simon Lockhart wrote:
> I'm in the middle of porting the wcfxo driver to solaris, and am having a few
> problems with Bus Errors (leading to kernel panic) whenever hardware interupts
> are enabled.
> 
> Does anyone have a copy of the technical spec for this card (I'm actually
> working against a clone card, but that doesn't seem to be relevant at the
> driver level)? (i.e. stuff about the interface presented to the PCI bus)
> 
> Thanks,
> 
> Simon