[Asterisk-Dev] modprobe wcfxs

Pedro Alfaro faite_usa at hotmail.com
Fri Sep 12 14:26:24 MST 2003 

Hello
somebody can help me to resulve this problem, thanks
I have problems with the modprobe wcfxs
this is the error

#modprobe wcfxs

/lib/modules/2.4.20-20.9/misc/wcfxs.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including 
invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-20.9/misc/wcfxs.o: insmod 
/lib/modules/2.4.20-20.9/misc/wcfxs.o failed
/lib/modules/2.4.20-20.9/misc/wcfxs.o: insmod wcfxs failed

the dmesg shows

#dmesg
Linux version 2.4.20-20.9 (bhcompile at stripples.devel.redhat.com) (gcc 
version 3.2.2 20030222 (Red Hat Linux
3.2.2-5)) #1 Mon Aug 18 11:45:58 EDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff87000 (usable)
BIOS-e820: 000000001ff87000 - 000000001ffa6000 (ACPI data)
BIOS-e820: 000000001ffa6000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 130951
zone(0): 4096 pages.
zone(1): 126855 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1495.486 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2981.88 BogoMIPS
Memory: 510924k/523804k available (1358k kernel code, 10320k reserved, 1004k 
data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU:             Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfc11e, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ 
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 3 for device 02:09.0
PCI: Sharing IRQ 3 with 02:0c.0
Redundant entry in serial pci_table.  Please send the output of
lspci -vv, this message (12b9,1008,12b9,baba)
and the manufacturer and name of serial board or modem board
to serial-pci-info at lists.sourceforge.net.
ttyS4 at port 0xe4f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 2
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 98196H8, ATA DISK drive
blk: queue c03cdfe0, I/O limit 4095Mb (mask 0xffffffff)
hdc: SAMSUNG CDRW/DVD SM-308B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156250000 sectors (80000 MB) w/2048KiB Cache, CHS=9726/255/63, 
UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 11:55:13 Aug 18 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1f.2
PCI: Sharing IRQ 11 with 02:0a.0
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 1044184k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: SAMSUNG   Model: CDRW/DVD SM-308B  Rev: M002
  Type:   CD-ROM                             ANSI SCSI revision: 02
IA-32 Microcode Update Driver: v1.11 <tigran at veritas.com>
microcode: CPU0 already at revision 7 (current=7)
microcode: freed 2048 bytes
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 0x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ip_tables: (C) 2000-2002 Netfilter core team
PCI: Found IRQ 3 for device 02:0c.0
PCI: Sharing IRQ 3 with 02:09.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
02:0c.0: 3Com PCI 3c905C Tornado at 0xe400. Vers LK1.1.18-ac
00:b0:d0:18:15:0f, IRQ 3
  product code 0000 rev 00.3 date 07-16-95
  Internal config register is 1800000, transceivers 0xa.
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 782d.
  Enabling bus-master transmits and whole-frame receives.
02:0c.0: scatter/gather enabled. h/w checksums enabled
divert: allocating divert_blk for eth0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 5 for device 02:07.0
PCI: Sharing IRQ 5 with 01:00.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Wildcard X101P
PCI: Found IRQ 10 for device 02:08.0
PCI: Sharing IRQ 10 with 00:1f.3
Freshmaker version: 63
Freshmaker passed register test
ProSLIC on module 0 failed to powerup within 510 ms
Unable to do INITIAL ProSLIC powerup on module 0
Module 0: Not installed
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
PCI: Found IRQ 10 for device 02:08.0
PCI: Sharing IRQ 10 with 00:1f.3
Freshmaker version: 63
Freshmaker passed register test
ProSLIC on module 0 insane (1) 0 should be 2
Module 0: Not installed
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
PCI: Found IRQ 10 for device 02:08.0
PCI: Sharing IRQ 10 with 00:1f.3
Freshmaker version: 63
Freshmaker passed register test
ProSLIC on module 0 insane (1) 0 should be 2
Module 0: Not installed
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
PCI: Found IRQ 10 for device 02:08.0
PCI: Sharing IRQ 10 with 00:1f.3
Freshmaker version: 63
Freshmaker passed register test
ProSLIC on module 0 insane (1) 0 should be 2
Module 0: Not installed
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed

_________________________________________________________________
Charla con tus amigos en línea mediante MSN Messenger: 
http://messenger.yupimsn.com/

More information about the asterisk-dev mailing list