[Asterisk-Dev] e100p errors

[Michiel Betel]

Roy.... Can you re-attach the conf's???

-----Original Message-----
From: asterisk-dev-admin at lists.digium.com
[mailto:asterisk-dev-admin at lists.digium.com] On Behalf Of Roy Sigurd
Karlsbakk
Sent: woensdag 29 oktober 2003 14:51
To: Asterisk Developers
Subject: [Asterisk-Dev] e100p errors


Hi. Just bought my e100p card, but it seems to be some problems here. I keep
getting the following errors. First this:

WARNING[10251]: File chan_zap.c, Line 5581 (zt_pri_error): PRI: Read on 33
failed: Unknown error 500 PRI got event: 4

Then a pair of these up to 12 (that's the number of D channels we have):

WARNING[11276]: File chan_zap.c, Line 4597 (handle_init_event): Detected
alarm on channel 1: Yellow Alarm
WARNING[11276]: File chan_zap.c, Line 1094 (zt_disable_ec): Unable to
disable echo cancellation on channel 1

...then it hangs up my call (doesn't matter if it's dialled in or out):

  == Spawn extension (roy, s, 1) exited non-zero on 'Zap/2-1'
    -- Hungup 'Zap/2-1'
WARNING[10251]: File chan_zap.c, Line 5581 (zt_pri_error): PRI: Read on 33
failed: Unknown error 500 PRI got event: 5

..and it gets the one above before clearing all alarms (1-12)

NOTICE[11276]: File chan_zap.c, Line 4592 (handle_init_event): Alarm cleared
on channel 1

...and this goes on and on.
attached is the configuration files (zaptel.conf and zapata.conf).

Any idea what to do about this? Please?

_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-dev