[Asterisk-Dev] Problems with making calls from one Gnophone to another through the local Asterisk Server

[Hemant Kumar]

well you are spamming this list by sending so many multiple mails. 

fyi, always send mail in TEXT as lot of people only like TEXT. 


  ----- Original Message ----- 
  From: Sheeba Aggarwal 
  To: asterisk-dev at lists.digium.com 
  Sent: Tuesday, October 21, 2003 9:20 AM
  Subject: [Asterisk-Dev] Problems with making calls from one Gnophone to another through the local Asterisk Server



  Dear Members,

  I am trying to make call from one Gnophone to another through the local
  Asterisk Server.All the three systems have local IP Addresses
  I created two users "sheeba" (extension 600) and "test" (extension 602) in
  iax.conf file:
  [sheeba]
  type=friend
  auth=plaintext
  host=dynamic
  secret=sheeba
  context=default
  allow=gsm
  permit=0.0.0.0/0.0.0.0
  callerid="sheeba"<600>

  [test]
  type=friend
  auth=plaintext
  host=dynamic
  secret=test
  allow=gsm
  context=default
  permit=0.0.0.0/0.0.0.0
  callerid="test"<602>

  In the extension.conf file ,i made the following configuration:

  exten => 600,1,Dial(IAX/sheeba/s|100|r)
  exten => 600,2,Playback(demo-congrats)
  exten => 600,102,Playback(demo-thanks)
  exten => 600,3,Hangup

  exten => 602,1,Dial(IAX/test/s|100|r)
  exten => 602,2,Playback(demo-congrats)
  exten => 602,102,Playback(demo-thanks)
  exten => 602,3,Hangup

  On making this configuration,i called user "test" with extension 602 from
  user "sheeba" with extension 600.
  I got the following log on server:

  Accepting AUTHENTICATED call from 192.168.8.156, requested format = 2,
  actual format = 2
      -- Executing Dial("IAX[sheeba at sheeba]/80", "IAX/test/s|100|r") in new
  stack
      -- Calling using options
  'exten=s;callerid="sheeba"<600>;language=en;formats=2;capability=65283;version=1;adsicpe=0'
      -- Called test/s
     -- Call accepted by 192.168.8.62 (format GSM)
      -- Format for call is GSM
      -- IAX[test]/81 is ringing
      -- IAX[test]/81 answered IAX[sheeba at sheeba]/80
     -- Attempting native bridge of IAX[sheeba at sheeba]/80 and IAX[test]/81
      -- Channel 'IAX[sheeba at sheeba]/80' ready to transfer
      -- Channel 'IAX[test]/81' ready to transfer
      -- Releasing IAX[test]/81 and IAX[sheeba at sheeba]/80
      -- Hungup 'IAX[test]/81'
    == Spawn extension (default, 602, 1) exited non-zero on
  'IAX[sheeba at sheeba]/80'
      -- Hungup 'IAX[sheeba at sheeba]/80'

  In this log,it attempts the native bridge of "sheeba"with "test",then it
  gives both the channels are ready to transfer and then releases the
  channels.The call is not getting through.What could be the possible error.

  Pl help me asap by sending your valuable comments.Your suggestions will be
  highly appreciated.

  Regards,

  Sheeba Aggarwal
  Senior Engineer,  HFCL R&D
  286, Phase 2, Udyog Vihar
  Gurgaon, Haryana
  India -122016
   
  Phone No: 91-124-2348846/842 - ext-122
  email: sheebaaggarwal at hfcl.com



------------------------------------------------------------------------------
   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20031021/b4c924e5/attachment.htm