[Asterisk-Dev] zapata.conf group bug?

[Mark Spencer]

> -snip-
> group=1
> callerid="Server Room" <221>
> channel => 21
> group=2
> callerid="Server Room" <222>
> channel => 22
> group=1
> callerid="Bathroom" <223>
> channel => 23
> callerid="Telephone Closet" <224>
> channel => 24

Your group will apply to any channels following the definition.  If you
want a channel to be a member of more than one group you should do
group=1,2 and so on.

> The result of this configuration is that if I do a Dial,Zap/g1, then
> only channel 21 rings, not 21, 23, and 24.

Of course, because it's the first available channel.  Dialing a group does
not ring all interfaces, just the first available one.

Mark