[Asterisk-Dev] RE: VoiceTronix OpenSwitch12 Problem

[Jacky]

Faiz, Daniel,

When i chang chan_vpb.c to following

static VPB_TONE Dialtone     = {440, 440, 440, -12,  -12, -12, 5000, 0   };
static VPB_TONE Busytone     = {440,   0,   0, -12,  -12, -12,   500, 500};
static VPB_TONE Ringbacktone = {440,   0,   0, -12,  -12, -12,  100, 100};

it is work in OpenSwitch 12, but when i call from CO to EXT, the EXT phone
only ring one time
After Off Hook the phone, the answer response delay about 3 seconds

What is the main cause?

Thank for  your help




----- Original Message ----- 
From: "Ahmad Faiz" <afaiz at bridge-cti.com>
To: <asterisk-dev at lists.digium.com>
Sent: Friday, December 19, 2003 9:05 AM
Subject: [Asterisk-Dev] RE: VoiceTronix OpenSwitch12 Problem


> I had the same problem with my Linux and I fixed it up lowring
> DBLevels. DBLevels = -100 are silence levels and they do nothing...

Daniel,

I think that's the difference between the OpenSwitch and OpenLine cards -
when i set the low db level to -100 I was getting the same errors still. I
set it then to -5 and the error went away.

Cheers,
Faiz


_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-dev