[Asterisk-Dev] SIP registration now fails ?

[Mark Spencer]

That's fine, but then Asterisk won't let it "register" but that shouldn't
cause any other problems.  If you want it to register, you *have* to use
"host=dynamic" even if you do "defaultip=<staticip>" later.

Mark

On Sat, 19 Apr 2003, Iain Stevenson wrote:

>
> They're both configured as "friends".   A "sip show peers" reported the ATA
> 186 interfaces (as well as the registration with FWD).
>
> Maybe it's got something to do with the "dynamic" option.  However,  my ATA
> 186 will always have the same address - I've set DHCP up to do that - so it
> seems unnecessary to designate it as dynamic.  I'd assumed that
> host=ata186.myhome.net would be OK since this will always resolve to the
> same address which is the default address specified in sip.conf.
>
>   Iain
>
>
> --On Saturday, April 19, 2003 12:58:33 -0500 Mark Spencer
> <markster at digium.com> wrote:
>
> > Sounds like you don't have a peer named "cisco" or it's not dynamic,
> > because we're not even giving it the chance to attempt to authenticate.
> >
> > Mark
> >
> > On Sat, 19 Apr 2003, Iain Stevenson wrote:
> >
> >>
> >> I installed the latest cvs today and seem to be having some problems with
> >> SIP registration from my ATA 186.   As well as loading the latest * I
> >> also configured a FWD accounr although I can't see why this should have
> >> mucked up registration of the local ATA 186.
> >>
> >> I've attached the SIP trace below.   The ATA 186 is named
> >> ata186.myhome.net but this doesn't appear anywhere in the registration
> >> messages.  It's I{P address is 192.168.1.240.  myhost.myhome.net is the
> >> * server.  It used to work OK.  Any clues?
> >>
> >>   Iain
> >>
> >>
> >>
> >> Sip read:
> >> REGISTER sip:myhost.myhome.net SIP/2.0
> >> Via: SIP/2.0/UDP 192.168.1.240:5060
> >> From: sip:cisco at myhost.myhome.net
> >> To: sip:cisco at myhost.myhome.net
> >> Call-ID: 624861130 at 192.168.1.240
> >> CSeq: 1 REGISTER
> >> Contact:  <sip:cisco at 192.168.1.240:5060;transport=udp>;expires=3600
> >> User-Agent: Cisco ATA  v2.15 ata18x (020927a)
> >> Content-Length: 0
> >>
> >>
> >> 9 headers, 0 lines
> >> Interface is eth0
> >> IP Address is 192.168.1.254
> >> Using latest request as basis request
> >> Sending to 192.168.1.240 : 5060 (non-NAT)
> >> Transmitting (no NAT):
> >> SIP/2.0 401 Unauthorized
> >> Via: SIP/2.0/UDP 192.168.1.240:5060
> >> From: sip:cisco at myhost.myhome.net
> >> To: sip:cisco at myhost.myhome.net;tag=as2a487cb0
> >> Call-ID: 624861130 at 192.168.1.240
> >> CSeq: 1 REGISTER
> >> User-Agent: Asterisk PBX
> >> Contact: <sip:cisco at 192.168.1.254>
> >> Content-Length: 0
> >>
> >>
> >>
> >> _______________________________________________
> >> Asterisk-Dev mailing list
> >> Asterisk-Dev at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-dev
> >>
> >
> > _______________________________________________
> > Asterisk-Dev mailing list
> > Asterisk-Dev at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-dev
> >
>
>
>
>
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
>