[Asterisk-Dev] SIP registration now fails ?

[Mark Spencer]

Sounds like you don't have a peer named "cisco" or it's not dynamic,
because we're not even giving it the chance to attempt to authenticate.

Mark

On Sat, 19 Apr 2003, Iain Stevenson wrote:

>
> I installed the latest cvs today and seem to be having some problems with
> SIP registration from my ATA 186.   As well as loading the latest * I also
> configured a FWD accounr although I can't see why this should have mucked
> up registration of the local ATA 186.
>
> I've attached the SIP trace below.   The ATA 186 is named ata186.myhome.net
> but this doesn't appear anywhere in the registration messages.  It's I{P
> address is 192.168.1.240.  myhost.myhome.net is the * server.  It used to
> work OK.  Any clues?
>
>   Iain
>
>
>
> Sip read:
> REGISTER sip:myhost.myhome.net SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.240:5060
> From: sip:cisco at myhost.myhome.net
> To: sip:cisco at myhost.myhome.net
> Call-ID: 624861130 at 192.168.1.240
> CSeq: 1 REGISTER
> Contact:  <sip:cisco at 192.168.1.240:5060;transport=udp>;expires=3600
> User-Agent: Cisco ATA  v2.15 ata18x (020927a)
> Content-Length: 0
>
>
> 9 headers, 0 lines
> Interface is eth0
> IP Address is 192.168.1.254
> Using latest request as basis request
> Sending to 192.168.1.240 : 5060 (non-NAT)
> Transmitting (no NAT):
> SIP/2.0 401 Unauthorized
> Via: SIP/2.0/UDP 192.168.1.240:5060
> From: sip:cisco at myhost.myhome.net
> To: sip:cisco at myhost.myhome.net;tag=as2a487cb0
> Call-ID: 624861130 at 192.168.1.240
> CSeq: 1 REGISTER
> User-Agent: Asterisk PBX
> Contact: <sip:cisco at 192.168.1.254>
> Content-Length: 0
>
>
>
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
>