[asterisk-commits] pjproject bundled: Allow passing configure options to bundled (asterisk[13])
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Wed Jul 5 17:39:57 CDT 2017
Jenkins2 has submitted this change and it was merged. ( https://gerrit.asterisk.org/5939 )
Change subject: pjproject_bundled: Allow passing configure options to bundled
......................................................................
pjproject_bundled: Allow passing configure options to bundled
There wasn't any good way to pass options like --host or --build
down to the pjproject configure which makes cross-compiling difficult.
* Added a new PJPROJECT_CONFIGURE_OPTS environment variable which
can be used to pass arbitrary options to pjproject configure.
* Automatically set the pjproject configure --host and --build
options to match those supplied for the asterisk configure.
ASTERISK-27097 #close
Reported-by: Kinsey Moore
Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e
---
M CHANGES
M configure
M third-party/configure.m4
M third-party/pjproject/Makefile.rules
M third-party/pjproject/configure.m4
5 files changed, 63 insertions(+), 26 deletions(-)
Approvals:
Richard Mudgett: Looks good to me, but someone else must approve
Joshua Colp: Looks good to me, but someone else must approve
George Joseph: Looks good to me, approved
Jenkins2: Approved for Submit
diff --git a/CHANGES b/CHANGES
index 98b4aa1..c3a2d0a 100644
--- a/CHANGES
+++ b/CHANGES
@@ -54,6 +54,14 @@
from the SDP, unless the remote side sends a different codec and we will
switch to match.
+Build System
+------------------
+ * Added a new PJPROJECT_CONFIGURE_OPTS environment variable which can be used
+ to pass arbitrary options to the bundled pjproject configure.
+
+ * Automatically set the bundled pjproject configure --host and --build
+ options to match those supplied for the asterisk configure.
+
------------------------------------------------------------------------------
--- Functionality changes from Asterisk 13.15.0 to Asterisk 13.16.0 ----------
------------------------------------------------------------------------------
diff --git a/configure b/configure
index 55b0225..c566357 100755
--- a/configure
+++ b/configure
@@ -1191,6 +1191,7 @@
PBX_PJPROJECT
PJPROJECT_DIR
PJPROJECT_BUNDLED
+PJPROJECT_CONFIGURE_OPTS
AST_C_COMPILER_FAMILY
AST_CLANG_BLOCKS
AST_CLANG_BLOCKS_LIBS
@@ -1327,7 +1328,6 @@
docdir
oldincludedir
includedir
-runstatedir
localstatedir
sharedstatedir
sysconfdir
@@ -1452,6 +1452,7 @@
CXXFLAGS
CCC
CXXCPP
+PJPROJECT_CONFIGURE_OPTS
PKG_CONFIG
PKG_CONFIG_PATH
PKG_CONFIG_LIBDIR
@@ -1507,7 +1508,6 @@
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
-runstatedir='${localstatedir}/run'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
@@ -1760,15 +1760,6 @@
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
- -runstatedir | --runstatedir | --runstatedi | --runstated \
- | --runstate | --runstat | --runsta | --runst | --runs \
- | --run | --ru | --r)
- ac_prev=runstatedir ;;
- -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
- | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
- | --run=* | --ru=* | --r=*)
- runstatedir=$ac_optarg ;;
-
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
@@ -1906,7 +1897,7 @@
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir runstatedir
+ libdir localedir mandir
do
eval ac_val=\$$ac_var
# Remove trailing slashes.
@@ -2059,7 +2050,6 @@
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
@@ -2206,6 +2196,8 @@
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
+ PJPROJECT_CONFIGURE_OPTS
+ Additional configure options to pass to bundled pjproject
PKG_CONFIG path to pkg-config utility
PKG_CONFIG_PATH
directories to add to pkg-config's search path
@@ -9276,20 +9268,33 @@
as_fn_error $? "cat is required to build bundled pjproject" "$LINENO" 5
fi
+
+ this_host=$(./config.sub $(./config.guess))
+ if test "$build" != "$this_host" ; then
+ PJPROJECT_CONFIGURE_OPTS+=" --build=$build"
+ fi
+ if test "$host" != "$this_host" ; then
+ PJPROJECT_CONFIGURE_OPTS+=" --host=$host"
+ fi
+
export TAR PATCH SED NM EXTERNALS_CACHE_DIR DOWNLOAD_TO_STDOUT DOWNLOAD_TIMEOUT DOWNLOAD MD5 CAT
- ${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} EXTERNALS_CACHE_DIR=${EXTERNALS_CACHE_DIR} configure
+ export NOISY_BUILD
+ ${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} \
+ PJPROJECT_CONFIGURE_OPTS="$PJPROJECT_CONFIGURE_OPTS" \
+ EXTERNALS_CACHE_DIR="${EXTERNALS_CACHE_DIR}" \
+ configure
if test $? -ne 0 ; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
$as_echo "failed" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: Unable to configure ${PJPROJECT_DIR}" >&5
$as_echo "$as_me: Unable to configure ${PJPROJECT_DIR}" >&6;}
- as_fn_error $? "Run \"${GNU_MAKE} -C ${PJPROJECT_DIR} NOISY_BUILD=yes configure\" to see error details." "$LINENO" 5
+ as_fn_error $? "Re-run the ./configure command with 'NOISY_BUILD=yes' appended to see error details." "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for bundled pjproject" >&5
$as_echo_n "checking for bundled pjproject... " >&6; }
- PJPROJECT_INCLUDE=$(${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} EXTERNALS_CACHE_DIR=${EXTERNALS_CACHE_DIR} echo_cflags)
+ PJPROJECT_INCLUDE=$(${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} PJPROJECT_CONFIGURE_OPTS="$PJPROJECT_CONFIGURE_OPTS" EXTERNALS_CACHE_DIR="${EXTERNALS_CACHE_DIR}" echo_cflags)
PJPROJECT_CFLAGS="$PJPROJECT_INCLUDE"
PBX_PJPROJECT=1
@@ -14668,7 +14673,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
@@ -14714,7 +14719,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
@@ -14738,7 +14743,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
@@ -14783,7 +14788,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
@@ -14807,7 +14812,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
diff --git a/third-party/configure.m4 b/third-party/configure.m4
index 6354466..55b72da 100644
--- a/third-party/configure.m4
+++ b/third-party/configure.m4
@@ -1,4 +1,7 @@
-
+#
+# If this file is changed, be sure to run ASTTOPDIR/bootstrap.sh
+# before committing.
+#
AC_DEFUN([THIRD_PARTY_CONFIGURE],
[
diff --git a/third-party/pjproject/Makefile.rules b/third-party/pjproject/Makefile.rules
index 3f99c8a..acd7662 100644
--- a/third-party/pjproject/Makefile.rules
+++ b/third-party/pjproject/Makefile.rules
@@ -1,8 +1,11 @@
PJPROJECT_URL ?= https://raw.githubusercontent.com/asterisk/third-party/master/pjproject/$(PJPROJECT_VERSION)
+# PJPROJECT_CONFIGURE_OPTS could come from the command line or could be
+# set/modified by configure.m4 if the build or host tuples aren't the same
+# as the current build environment (cross-compile).
# Even though we're not installing pjproject, we're setting prefix to /opt/pjproject to be safe
-PJPROJECT_CONFIG_OPTS = --prefix=/opt/pjproject \
+PJPROJECT_CONFIG_OPTS = $(PJPROJECT_CONFIGURE_OPTS) --prefix=/opt/pjproject \
--disable-speex-codec \
--disable-speex-aec \
--disable-speex-aec \
diff --git a/third-party/pjproject/configure.m4 b/third-party/pjproject/configure.m4
index a5e9fca..709a706 100644
--- a/third-party/pjproject/configure.m4
+++ b/third-party/pjproject/configure.m4
@@ -1,3 +1,8 @@
+#
+# If this file is changed, be sure to run ASTTOPDIR/bootstrap.sh
+# before committing.
+#
+
AC_DEFUN([_PJPROJECT_CONFIGURE],
[
if test "${ac_mandatory_list#*PJPROJECT*}" != "$ac_mandatory_list" ; then
@@ -35,17 +40,30 @@
AC_MSG_ERROR(cat is required to build bundled pjproject)
fi
+ AC_ARG_VAR([PJPROJECT_CONFIGURE_OPTS],[Additional configure options to pass to bundled pjproject])
+ this_host=$(./config.sub $(./config.guess))
+ if test "$build" != "$this_host" ; then
+ PJPROJECT_CONFIGURE_OPTS+=" --build=$build"
+ fi
+ if test "$host" != "$this_host" ; then
+ PJPROJECT_CONFIGURE_OPTS+=" --host=$host"
+ fi
+
export TAR PATCH SED NM EXTERNALS_CACHE_DIR DOWNLOAD_TO_STDOUT DOWNLOAD_TIMEOUT DOWNLOAD MD5 CAT
- ${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} EXTERNALS_CACHE_DIR=${EXTERNALS_CACHE_DIR} configure
+ export NOISY_BUILD
+ ${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} \
+ PJPROJECT_CONFIGURE_OPTS="$PJPROJECT_CONFIGURE_OPTS" \
+ EXTERNALS_CACHE_DIR="${EXTERNALS_CACHE_DIR}" \
+ configure
if test $? -ne 0 ; then
AC_MSG_RESULT(failed)
AC_MSG_NOTICE(Unable to configure ${PJPROJECT_DIR})
- AC_MSG_ERROR(Run "${GNU_MAKE} -C ${PJPROJECT_DIR} NOISY_BUILD=yes configure" to see error details.)
+ AC_MSG_ERROR(Re-run the ./configure command with 'NOISY_BUILD=yes' appended to see error details.)
fi
AC_MSG_CHECKING(for bundled pjproject)
- PJPROJECT_INCLUDE=$(${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} EXTERNALS_CACHE_DIR=${EXTERNALS_CACHE_DIR} echo_cflags)
+ PJPROJECT_INCLUDE=$(${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} PJPROJECT_CONFIGURE_OPTS="$PJPROJECT_CONFIGURE_OPTS" EXTERNALS_CACHE_DIR="${EXTERNALS_CACHE_DIR}" echo_cflags)
PJPROJECT_CFLAGS="$PJPROJECT_INCLUDE"
PBX_PJPROJECT=1
--
To view, visit https://gerrit.asterisk.org/5939
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-Project: asterisk
Gerrit-Branch: 13
Gerrit-MessageType: merged
Gerrit-Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e
Gerrit-Change-Number: 5939
Gerrit-PatchSet: 1
Gerrit-Owner: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Jenkins2
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Richard Mudgett <rmudgett at digium.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-commits/attachments/20170705/f9ce203d/attachment-0001.html>
More information about the asterisk-commits
mailing list