[asterisk-commits] debug utilities: Add ast logescalator (asterisk[master])
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Sun Jan 29 11:22:06 CST 2017
Anonymous Coward #1000019 has submitted this change and it was merged. ( https://gerrit.asterisk.org/4836 )
Change subject: debug_utilities: Add ast_logescalator
......................................................................
debug_utilities: Add ast_logescalator
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
---
M channels/chan_sip.c
A contrib/scripts/ast_logescalator
M main/manager.c
M res/res_pjsip_history.c
4 files changed, 479 insertions(+), 29 deletions(-)
Approvals:
Kevin Harwell: Looks good to me, but someone else must approve
Anonymous Coward #1000019: Verified
Joshua Colp: Looks good to me, approved
diff --git a/channels/chan_sip.c b/channels/chan_sip.c
index 288933f..3bb6e74 100644
--- a/channels/chan_sip.c
+++ b/channels/chan_sip.c
@@ -613,6 +613,8 @@
</managerEvent>
***/
+static int log_level = -1;
+
static int min_expiry = DEFAULT_MIN_EXPIRY; /*!< Minimum accepted registration time */
static int max_expiry = DEFAULT_MAX_EXPIRY; /*!< Maximum accepted registration time */
static int default_expiry = DEFAULT_DEFAULT_EXPIRY;
@@ -3932,6 +3934,9 @@
}
AST_LIST_INSERT_TAIL(p->history, hist, list);
p->history_entries++;
+ if (log_level != -1) {
+ ast_log_dynamic_level(log_level, "%s\n", buf);
+ }
}
/*! \brief Append to SIP dialog history with arg list */
@@ -35172,6 +35177,10 @@
struct sip_peer *bogus_peer;
ast_verbose("SIP channel loading...\n");
+ log_level = ast_logger_register_level("SIP_HISTORY");
+ if (log_level < 0) {
+ ast_log(LOG_WARNING, "Unable to register history log level\n");
+ }
if (STASIS_MESSAGE_TYPE_INIT(session_timeout_type)) {
unload_module();
@@ -35572,6 +35581,9 @@
sip_cfg.caps = NULL;
STASIS_MESSAGE_TYPE_CLEANUP(session_timeout_type);
+ if (log_level != -1) {
+ ast_logger_unregister_level("SIP_HISTORY");
+ }
return 0;
}
diff --git a/contrib/scripts/ast_logescalator b/contrib/scripts/ast_logescalator
new file mode 100755
index 0000000..054ef9b
--- /dev/null
+++ b/contrib/scripts/ast_logescalator
@@ -0,0 +1,399 @@
+#!/usr/bin/env bash
+# Turn on extended globbing
+shopt -s extglob
+# Bail on any error
+set -e
+
+prog=$(basename $0)
+
+print_help() {
+cat <<EOF
+NAME
+ $prog - Escalate Asterisk logging levels
+
+SYNOPSIS
+ $prog [ --help ] | [ [ --reset ] | [
+ [ --uniqueid="<uniqueid>" ]
+
+ [ --pjsip-debug=<on|off> ] [ --sip-debug=<on|off> ]
+ [ --iax2-debug=<on|off> ]
+
+ [ --agi-debug=<on|off> ] [ --ami-debug=<on|off> ]
+ [ --ari-debug=<on|off> ] [ --cdr-debug=<on|off> ]
+ [ --channel-debug=<on|off> ] [ --rtp-debug=<on|off> ]
+ [ --rtcp-debug=<on|off> ]
+
+ [ --dtmf-debug=<on|off> ] [ --fax-debug=<on|off> ]
+ [ --security-debug=<on|off> ]
+
+ [ --pjsip-history=<on|off> ] [ --sip-history=<on|off> ]
+
+ [ --verbose=<level> ] [ --debug=<level> ]
+ ] ]
+
+DESCRIPTION
+
+ Escalates log and/or debug levels on Asterisk subsystems.
+
+ Options:
+
+ --help
+ Print this help.
+
+ --reset
+ Resets logging to the pre-escalation state.
+
+ --uniqueid="<uniqueid>"
+ Normally DATEFORMAT from ast_debug_tools.conf is used to make
+ the log files unique but you can set the unique id to
+ something else such as the Jira issue. Once any logging
+ is enabled, the uniqueid is stored in cli.conf so any future
+ on/off commands will use the same uniqueid. Use the --reset
+ option to reset it (and everything else).
+
+ --pjsip-debug --sip-debug --iax2-debug --agi-debug --ami-debug
+ --ari-debug --cdr-debug --channel-debug --rtp-debug --rtcp-debug
+ Issues the subsystem appropriate command to turn on
+ or off debugging. These are usually functional debug messages
+ such as packet dumps as opposed to code level messages and usually
+ go to the VERBOSE log channel.
+
+ --dtmf-debug --fax-debug --security-debug
+ These subsystems set up their own log channels so if turned
+ on, log files will be created in \$astlogdir for them.
+
+ --pjsip-history --sip-history
+ The pjsip and sip channels have the ability to output an
+ abbreviated, one-line, packet summary. If enabled, the summaries
+ will be written to \$astlogdir/pjsip_history.\$UNIQUEID and
+ \$astlogdir/sip_history.\$UNIQUEID.
+
+ --verbose-level --debug-level
+ Sets the levels for their respective messages.
+
+NOTES
+
+ The escalator works by creating a set of startup commands in cli.conf
+ that set up logger channels and issue the debug commands. If asterisk
+ is running when $prog is executed, the same commands will be issued
+ to the running instance. The original cli.conf is saved before any
+ changes are made and can be restored by executing '$prog --reset'.
+
+ The log output will be stored in...
+ \$astlogdir/message.\$uniqueid
+ \$astlogdir/debug.\$uniqueid
+ \$astlogdir/dtmf.\$uniqueid
+ \$astlogdir/fax.\$uniqueid
+ \$astlogdir/security.\$uniqueid
+ \$astlogdir/pjsip_history.\$uniqueid
+ \$astlogdir/sip_history.\$uniqueid
+
+EOF
+ exit 1
+}
+
+PJSIP_DEBUG_SPECIFIED=false
+PJSIP_HISTORY_SPECIFIED=false
+SIP_DEBUG_SPECIFIED=false
+SIP_HISTORY_SPECIFIED=false
+IAX2_DEBUG_SPECIFIED=false
+ARI_DEBUG_SPECIFIED=false
+AMI_DEBUG_SPECIFIED=false
+AGI_DEBUG_SPECIFIED=false
+CDR_DEBUG_SPECIFIED=false
+CHANNEL_DEBUG_SPECIFIED=false
+RTP_DEBUG_SPECIFIED=false
+RTCP_DEBUG_SPECIFIED=false
+DTMF_DEBUG_SPECIFIED=false
+FAX_DEBUG_SPECIFIED=false
+SECURITY_DEBUG_SPECIFIED=false
+DEBUG_LEVEL_SPECIFIED=false
+VERBOSE_LEVEL_SPECIFIED=false
+DEBUGS=false
+RESET=false
+
+declare -A DEBUG_COMMANDS=(
+[PJSIP,on]="pjsip set logger on" [PJSIP,off]="pjsip set logger off"
+[SIP,on]="sip set debug on" [SIP,off]="sip set debug off"
+[IAX2,on]="iax2 set debug on" [IAX2,off]="iax2 set debug off"
+[ARI,on]="ari set debug all on" [ARI,off]="ari set debug all off"
+[AMI,on]="manager set debug on" [AMI,off]="manager set debug off"
+[AGI,on]="agi set debug on" [AGI,off]="agi set debug off"
+[CDR,on]="cdr set debug on" [CDR,off]="cdr set debug off"
+[CHANNEL,on]="core set debug channel all" [CHANNEL,off]="core set debug channel all off"
+[RTP,on]="rtp set debug on" [RTP,on]="rtp set debug off"
+[RTCP,on]="rtcp set debug on" [RTCP,off]="rtcp set debug off"
+)
+
+VERBOSE_LEVELS="NOTICE,WARNING,ERROR,VERBOSE"
+DEBUG_LEVELS="DEBUG"
+
+# Read config files from least important to most important
+[ -f /etc/asterisk/ast_debug_tools.conf ] && source /etc/asterisk/ast_debug_tools.conf
+[ -f ~/ast_debug_tools.conf ] && source ~/ast_debug_tools.conf
+[ -f ./ast_debug_tools.conf ] && source ./ast_debug_tools.conf
+
+DATEFORMAT=${DATEFORMAT:-'date +%FT%H-%M-%S%z'}
+UNIQUEID=$($DATEFORMAT)
+UNIQUEID_SPECIFIED=false
+
+for a in "$@" ; do
+ case "$a" in
+ --*-debug=*)
+ subsystem=${a%-debug=*}
+ subsystem=${subsystem#--}
+ flag=${a#*=}
+ if [[ ${flag,,} =~ ^y(es)?|on ]] ; then
+ eval ${subsystem^^}_DEBUG=true
+ else
+ eval ${subsystem^^}_DEBUG=false
+ fi
+ eval ${subsystem^^}_DEBUG_SPECIFIED=true
+ DEBUGS=true
+ ;;
+ --pjsip-history=*)
+ ;&
+ --sip-history=*)
+ subsystem=${a%-history=*}
+ subsystem=${subsystem#--}
+ if [[ ${a#*=} =~ ^[Yy].* ]] ; then
+ eval ${subsystem^^}_HISTORY=true
+ else
+ eval ${subsystem^^}_HISTORY=false
+ fi
+ eval ${subsystem^^}_HISTORY_SPECIFIED=true
+ DEBUGS=true
+ ;;
+ --verbose=*)
+ VERBOSE_LEVEL=${a#*=}
+ VERBOSE_LEVEL_SPECIFIED=true
+ DEBUGS=true
+ ;;
+ --debug=*)
+ DEBUG_LEVEL=${a#*=}
+ DEBUG_LEVEL_SPECIFIED=true
+ DEBUGS=true
+ ;;
+ --reset)
+ RESET=true
+ ;;
+ --uniqueid=*)
+ UNIQUEID=${a#*=}
+ UNIQUEID_SPECIFIED=true
+ DEBUGS=true
+ ;;
+ --help|*)
+ print_help
+ ;;
+ esac
+done
+
+if $DEBUGS && $RESET ; then
+ echo "--reset must be specified by itself"
+ print_help
+fi
+
+if ! $DEBUGS && ! $RESET ; then
+ echo "No options specified."
+ print_help
+fi
+
+ASTERISK_IS_RUNNING=false
+CONFIG_DIR=/etc/asterisk
+LOG_DIR=/var/log/asterisk
+
+if [ "$(pidof asterisk)" != "" ] ; then
+ CONFIG_DIR=`asterisk -rx "core show settings" | sed -n -r -e "s/^\s*Configuration\s+directory:\s+(.*)$/\1/gp"`
+ LOG_DIR=`asterisk -rx "core show settings" | sed -n -r -e "s/^\s*Log\s+directory:\s+(.*)$/\1/gp"`
+ ASTERISK_IS_RUNNING=true
+fi
+CLI_CONF="$CONFIG_DIR/cli.conf"
+
+if [ ! -f "$CLI_CONF" ] ; then
+ echo "The location of cli.conf could not be determined."
+ exit 1
+fi
+
+if $RESET ; then
+ if [ -f "$CLI_CONF.unescalated" ] ; then
+ mv "$CLI_CONF.unescalated" "$CLI_CONF"
+ fi
+ if $ASTERISK_IS_RUNNING ; then
+ (
+ asterisk -rx "core set verbose 0"
+ asterisk -rx "core set debug 0"
+ asterisk -rx "pjsip set logger off"
+ asterisk -rx "pjsip set history off"
+ asterisk -rx "sip set debug off"
+ asterisk -rx "sip set history off"
+ asterisk -rx "iax2 set debug off"
+ asterisk -rx "manager set debug off"
+ asterisk -rx "ari set debug all off"
+ asterisk -rx "agi set debug off"
+ asterisk -rx "rtp set debug off"
+ asterisk -rx "rtcp set debug off"
+ asterisk -rx "cdr set debug off"
+ asterisk -rx "core set debug channel all off"
+ asterisk -rx "logger reload"
+ ) >/dev/null 2>&1 || :
+ fi
+ exit 1
+fi
+
+if ! grep -q "; --START DEBUG_LOGGING-- ;" $CLI_CONF ; then
+ VERBOSE_LOG="$LOG_DIR/message.${UNIQUEID}"
+ DEBUG_LOG="$LOG_DIR/debug.${UNIQUEID}"
+ PJSIP_HISTORY_LOG="$LOG_DIR/pjsip_history.${UNIQUEID}"
+ SIP_HISTORY_LOG="$LOG_DIR/sip_history.${UNIQUEID}"
+ DTMF_LOG="$LOG_DIR/dtmf.${UNIQUEID}"
+ FAX_LOG="$LOG_DIR/fax.${UNIQUEID}"
+ SECURITY_LOG="$LOG_DIR/security.${UNIQUEID}"
+
+ cp "$CLI_CONF" "$CLI_CONF.unescalated"
+
+ sed -i -r -e "s/\[startup_commands\]/[startup_commands_original](!)/g" "$CLI_CONF"
+
+ cat >> "$CLI_CONF" <<-EOF
+ ; --START DEBUG_LOGGING-- ;
+
+ [pjsip_debug](!)
+ pjsip set logger on = yes
+
+ [sip_debug](!)
+ sip set debug on = yes
+
+ [iax2_debug](!)
+ iax2 set debug on = yes
+
+ [ari_debug](!)
+ ari set debug all on = yes
+
+ [ami_debug](!)
+ manager set debug on = yes
+
+ [agi_debug](!)
+ agi set debug on = yes
+
+ [cdr_debug](!)
+ cdr set debug on = yes
+
+ [channel_debug](!)
+ core set debug channel all = yes
+
+ [rtp_debug](!)
+ rtp set debug on = yes
+
+ [rtcp_debug](!)
+ rtcp set debug on = yes
+
+ [dtmf_debug](!)
+ logger add channel $DTMF_LOG DTMF = yes
+
+ [fax_debug](!)
+ logger add channel $FAX_LOG FAX = yes
+
+ [security_debug](!)
+ logger add channel $SECURITY_LOG SECURITY = yes
+
+ [pjsip_history](!)
+ logger add channel $PJSIP_HISTORY_LOG PJSIP_HISTORY = yes
+ pjsip set history on = yes
+
+ [sip_history](!)
+ logger add channel $SIP_HISTORY_LOG SIP_HISTORY = yes
+ sip set history on = yes
+
+ [verbose_level](!)
+ core set verbose 3 = yes
+
+ [debug_level](!)
+ core set debug 3 = yes
+
+ [log_channels](!)
+ logger add channel $VERBOSE_LOG NOTICE,WARNING,ERROR,VERBOSE = yes
+ logger add channel $DEBUG_LOG DEBUG = yes
+
+ [startup_commands](startup_commands_original,log_channels)
+
+ ; --END DEBUG_LOGGING-- ;
+ EOF
+
+else
+ if $UNIQUEID_SPECIFIED ; then
+ echo "Debug logging is already active. Either rerun $prog without --uniqueid or with --reset to start over."
+ exit 1
+ fi
+
+ VERBOSE_LOG=$(sed -n -r -e "s at logger add channel ($LOG_DIR/message\..+)\s+NOTICE.*@\1 at p" "$CLI_CONF")
+ DEBUG_LOG=$(sed -n -r -e "s at logger add channel ($LOG_DIR/debug\..+)\s+DEBUG.*@\1 at p" "$CLI_CONF")
+ PJSIP_HISTORY_LOG=$(sed -n -r -e "s at logger add channel ($LOG_DIR/pjsip_history\..+)\s+PJSIP.*@\1 at p" "$CLI_CONF")
+ SIP_HISTORY_LOG=$(sed -n -r -e "s at logger add channel ($LOG_DIR/sip_history\..+)\s+SIP.*@\1 at p" "$CLI_CONF")
+ DTMF_LOG=$(sed -n -r -e "s at logger add channel ($LOG_DIR/dtmf\..+)\s+DTMF.*@\1 at p" "$CLI_CONF")
+ FAX_LOG=$(sed -n -r -e "s at logger add channel ($LOG_DIR/fax\..+)\s+FAX.*@\1 at p" "$CLI_CONF")
+ SECURITY_LOG=$(sed -n -r -e "s at logger add channel ($LOG_DIR/security\..+)\s+SECURITY.*@\1 at p" "$CLI_CONF")
+fi
+
+for x in PJSIP SIP ARI AMI AGI ARI IAX2 CDR RTP RTCP ; do
+ if eval \$${x}_DEBUG_SPECIFIED ; then
+ if eval \$${x}_DEBUG ; then
+ if $ASTERISK_IS_RUNNING ; then
+ asterisk -rx "${DEBUG_COMMANDS[$x,on]}"
+ fi
+ egrep -q "^\[startup_commands\].*${x,,}_debug.*" "$CLI_CONF" ||
+ sed -i -r -e "/\[startup_commands\]/ s/\((.*)\)/(\1,${x,,}_debug)/g" "$CLI_CONF"
+ else
+ if $ASTERISK_IS_RUNNING ; then
+ asterisk -rx "${DEBUG_COMMANDS[$x,off]}"
+ fi
+ sed -i -r -e "/\[startup_commands\].*${x,,}_debug.*/ s/,${x,,}_debug//g" "$CLI_CONF"
+ fi
+ fi
+done
+
+for x in DTMF FAX SECURITY ; do
+ if eval \$${x}_DEBUG_SPECIFIED ; then
+ if eval \$${x}_DEBUG ; then
+ if $ASTERISK_IS_RUNNING ; then
+ asterisk -rx "$(eval "echo logger add channel \$${x}_LOG ${x}")" >/dev/null 2>&1
+ fi
+ egrep -q "^\[startup_commands\].*${x,,}_debug.*" "$CLI_CONF" ||
+ sed -i -r -e "/\[startup_commands\]/ s/\((.*)\)/(\1,${x,,}_debug)/g" "$CLI_CONF"
+ else
+ if $ASTERISK_IS_RUNNING ; then
+ asterisk -rx "$(eval "echo logger remove channel \$${x}_LOG")"
+ fi
+ sed -i -r -e "/\[startup_commands\].*${x,,}_debug.*/ s/,${x,,}_debug//g" "$CLI_CONF"
+ fi
+ fi
+done
+
+for x in PJSIP SIP ; do
+ if eval \$${x}_HISTORY_SPECIFIED ; then
+ if eval \$${x}_HISTORY ; then
+ if $ASTERISK_IS_RUNNING ; then
+ asterisk -rx "$(eval "echo logger add channel \$${x}_HISTORY_LOG ${x}_HISTORY")"
+ asterisk -rx "${x,,} set history on"
+ fi
+ egrep -q "^\[startup_commands\].*${x,,}_history.*" "$CLI_CONF" ||
+ sed -i -r -e "/\[startup_commands\]/ s/\((.*)\)/(\1,${x,,}_history)/g" "$CLI_CONF"
+ else
+ if $ASTERISK_IS_RUNNING ; then
+ asterisk -rx "$(eval "echo logger remove channel \$${x}_HISTORY_LOG")"
+ asterisk -rx "${x,,} set history off"
+ fi
+ sed -i -r -e "/\[startup_commands\].*${x,,}_history.*/ s/,${x,,}_history//g" "$CLI_CONF"
+ fi
+ fi
+done
+
+for x in VERBOSE DEBUG ; do
+ if eval \$${x}_LEVEL_SPECIFIED ; then
+ if $ASTERISK_IS_RUNNING ; then
+ asterisk -rx "$(eval "echo logger add channel \$${x}_LOG \$${x}_LEVELS")"
+ asterisk -rx "$(eval "echo core set ${x,,} \$${x}_LEVEL")"
+ fi
+ sed -i -r -e "$(eval "echo s/core set ${x,,} .*/core set ${x,,} \$${x}_LEVEL/g")" "$CLI_CONF"
+ egrep -q "^\[startup_commands\].*${x,,}_level.*" "$CLI_CONF" ||
+ sed -i -r -e "/\[startup_commands\]/ s/\((.*)\)/(\1,${x,,}_level)/g" "$CLI_CONF"
+ fi
+done
diff --git a/main/manager.c b/main/manager.c
index f059015..dfe0564 100644
--- a/main/manager.c
+++ b/main/manager.c
@@ -5889,7 +5889,11 @@
{
int result = 0;
- ast_debug(3, "Examining AMI event:\n%s\n", eventdata);
+ if (manager_debug) {
+ ast_verbose("<-- Examining AMI event: -->\n%s\n", eventdata);
+ } else {
+ ast_debug(3, "Examining AMI event:\n%s\n", eventdata);
+ }
if (!ao2_container_count(s->session->whitefilters) && !ao2_container_count(s->session->blackfilters)) {
return 1; /* no filtering means match all */
} else if (ao2_container_count(s->session->whitefilters) && !ao2_container_count(s->session->blackfilters)) {
diff --git a/res/res_pjsip_history.c b/res/res_pjsip_history.c
index 41c5bdf..853ba31 100644
--- a/res/res_pjsip_history.c
+++ b/res/res_pjsip_history.c
@@ -157,6 +157,9 @@
char field[];
};
+/*! \brief Log level for history output */
+static int log_level = -1;
+
/*!
* \brief Operator callback for determining equality
*/
@@ -644,6 +647,41 @@
return entry;
}
+/*! \brief Format single line history entry */
+static void sprint_list_entry(struct pjsip_history_entry *entry, char *line, int len)
+{
+ char addr[64];
+
+ if (entry->transmitted) {
+ pj_sockaddr_print(&entry->dst, addr, sizeof(addr), 3);
+ } else {
+ pj_sockaddr_print(&entry->src, addr, sizeof(addr), 3);
+ }
+
+ if (entry->msg->type == PJSIP_REQUEST_MSG) {
+ char uri[128];
+
+ pjsip_uri_print(PJSIP_URI_IN_REQ_URI, entry->msg->line.req.uri, uri, sizeof(uri));
+ snprintf(line, len, "%-5.5d %-10.10ld %-5.5s %-24.24s %.*s %s SIP/2.0",
+ entry->number,
+ entry->timestamp.tv_sec,
+ entry->transmitted ? "* ==>" : "* <==",
+ addr,
+ (int)pj_strlen(&entry->msg->line.req.method.name),
+ pj_strbuf(&entry->msg->line.req.method.name),
+ uri);
+ } else {
+ snprintf(line, len, "%-5.5d %-10.10ld %-5.5s %-24.24s SIP/2.0 %u %.*s",
+ entry->number,
+ entry->timestamp.tv_sec,
+ entry->transmitted ? "* ==>" : "* <==",
+ addr,
+ entry->msg->line.status.code,
+ (int)pj_strlen(&entry->msg->line.status.reason),
+ pj_strbuf(&entry->msg->line.status.reason));
+ }
+}
+
/*! \brief PJSIP callback when a SIP message is transmitted */
static pj_status_t history_on_tx_msg(pjsip_tx_data *tdata)
{
@@ -664,6 +702,13 @@
ast_mutex_lock(&history_lock);
AST_VECTOR_APPEND(&vector_history, entry);
ast_mutex_unlock(&history_lock);
+
+ if (log_level != -1) {
+ char line[256];
+
+ sprint_list_entry(entry, line, sizeof(line));
+ ast_log_dynamic_level(log_level, "%s\n", line);
+ }
return PJ_SUCCESS;
}
@@ -697,6 +742,13 @@
ast_mutex_lock(&history_lock);
AST_VECTOR_APPEND(&vector_history, entry);
ast_mutex_unlock(&history_lock);
+
+ if (log_level != -1) {
+ char line[256];
+
+ sprint_list_entry(entry, line, sizeof(line));
+ ast_log_dynamic_level(log_level, "%s\n", line);
+ }
return PJ_FALSE;
}
@@ -1118,38 +1170,12 @@
for (i = 0; i < AST_VECTOR_SIZE(vec); i++) {
struct pjsip_history_entry *entry;
- char addr[64];
char line[256];
entry = AST_VECTOR_GET(vec, i);
+ sprint_list_entry(entry, line, sizeof(line));
- if (entry->transmitted) {
- pj_sockaddr_print(&entry->dst, addr, sizeof(addr), 3);
- } else {
- pj_sockaddr_print(&entry->src, addr, sizeof(addr), 3);
- }
-
- if (entry->msg->type == PJSIP_REQUEST_MSG) {
- char uri[128];
-
- pjsip_uri_print(PJSIP_URI_IN_REQ_URI, entry->msg->line.req.uri, uri, sizeof(uri));
- snprintf(line, sizeof(line), "%.*s %s SIP/2.0",
- (int)pj_strlen(&entry->msg->line.req.method.name),
- pj_strbuf(&entry->msg->line.req.method.name),
- uri);
- } else {
- snprintf(line, sizeof(line), "SIP/2.0 %u %.*s",
- entry->msg->line.status.code,
- (int)pj_strlen(&entry->msg->line.status.reason),
- pj_strbuf(&entry->msg->line.status.reason));
- }
-
- ast_cli(a->fd, "%-5.5d %-10.10ld %-5.5s %-24.24s %s\n",
- entry->number,
- entry->timestamp.tv_sec,
- entry->transmitted ? "* ==>" : "* <==",
- addr,
- line);
+ ast_cli(a->fd, "%s\n", line);
}
}
@@ -1319,6 +1345,11 @@
{
CHECK_PJSIP_MODULE_LOADED();
+ log_level = ast_logger_register_level("PJSIP_HISTORY");
+ if (log_level < 0) {
+ ast_log(LOG_WARNING, "Unable to register history log level\n");
+ }
+
pj_caching_pool_init(&cachingpool, &pj_pool_factory_default_policy, 0);
AST_VECTOR_INIT(&vector_history, HISTORY_INITIAL_SIZE);
@@ -1339,6 +1370,10 @@
pj_caching_pool_destroy(&cachingpool);
+ if (log_level != -1) {
+ ast_logger_unregister_level("PJSIP_HISTORY");
+ }
+
return 0;
}
--
To view, visit https://gerrit.asterisk.org/4836
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: merged
Gerrit-Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
Gerrit-PatchSet: 4
Gerrit-Project: asterisk
Gerrit-Branch: master
Gerrit-Owner: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Anonymous Coward #1000019
Gerrit-Reviewer: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Kevin Harwell <kharwell at digium.com>
More information about the asterisk-commits
mailing list