[asterisk-commits] UPGRADE notes: Fixup for the 15 branch (asterisk[15])

SVN commits to the Asterisk project asterisk-commits at lists.digium.com
Thu Aug 10 19:56:56 CDT 2017 

Jenkins2 has submitted this change and it was merged. ( https://gerrit.asterisk.org/6207 )

Change subject: UPGRADE notes: Fixup for the 15 branch
......................................................................

UPGRADE notes: Fixup for the 15 branch

Change-Id: I4ca2f07ed62d77f1fdd10c3b216f6a28dd75720c
---
M UPGRADE-14.txt
D UPGRADE-15.txt
M UPGRADE.txt
3 files changed, 40 insertions(+), 90 deletions(-)

Approvals:
  George Joseph: Looks good to me, but someone else must approve
  Joshua Colp: Looks good to me, approved
  Jenkins2: Approved for Submit



diff --git a/UPGRADE-14.txt b/UPGRADE-14.txt
index f8fa790..aaf236b 100644
--- a/UPGRADE-14.txt
+++ b/UPGRADE-14.txt
@@ -22,6 +22,30 @@
 === UPGRADE-13.txt  -- Upgrade info for 12 to 13
 ===========================================================
 
+From 14.6.0 to 14.7.0:
+
+Core:
+ - ast_app_parse_timelen now returns an error if it encounters extra characters
+   at the end of the string to be parsed.
+
+From 14.4.0 to 14.5.0:
+
+Core:
+ - Support for embedded modules has been removed.  This has not worked in
+   many years.  LOADABLE_MODULES menuselect option is also removed as
+   loadable module support is now always enabled.
+
+From 14.3.0 to 14.4.0:
+
+res_rtp_asterisk:
+ - The RTP layer of Asterisk now has support for RFC 5761: "Multiplexing RTP
+   Data and Control Packets on a Single Port." For the PJSIP channel driver,
+   chan_pjsip, you can set "rtcp_mux = yes" on a PJSIP endpoint in pjsip.conf
+   to enable the feature. For chan_sip you can set "rtcp_mux = yes" either
+   globally or on a per-peer basis in sip.conf.
+
+New in 14.0.0
+
 ARI:
  - The policy for when to send "Dial" events has changed. Previously, "Dial"
    events were sent on the calling channel's topic. However, starting in Asterisk
diff --git a/UPGRADE-15.txt b/UPGRADE-15.txt
deleted file mode 100644
index 2e5eb1c..0000000
--- a/UPGRADE-15.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-===========================================================
-===
-=== Information for upgrading between Asterisk versions
-===
-=== These files document all the changes that MUST be taken
-=== into account when upgrading between the Asterisk
-=== versions listed below. These changes may require that
-=== you modify your configuration files, dialplan or (in
-=== some cases) source code if you have your own Asterisk
-=== modules or patches. These files also include advance
-=== notice of any functionality that has been marked as
-=== 'deprecated' and may be removed in a future release,
-=== along with the suggested replacement functionality.
-===
-=== UPGRADE-1.2.txt -- Upgrade info for 1.0 to 1.2
-=== UPGRADE-1.4.txt -- Upgrade info for 1.2 to 1.4
-=== UPGRADE-1.6.txt -- Upgrade info for 1.4 to 1.6
-=== UPGRADE-1.8.txt -- Upgrade info for 1.6 to 1.8
-=== UPGRADE-10.txt  -- Upgrade info for 1.8 to 10
-=== UPGRADE-11.txt  -- Upgrade info for 10 to 11
-=== UPGRADE-12.txt  -- Upgrade info for 11 to 12
-=== UPGRADE-13.txt  -- Upgrade info for 12 to 13
-=== UPGRADE-14.txt  -- Upgrade info for 13 to 14
-=== UPGRADE-15.txt  -- Upgrade info for 14 to 15
-===========================================================
-
-New in 15.0.0:
-
-Core:
- - The 'Data Retrieval API' has been removed. This API was not actively
-   maintained, was not added to new modules (such as res_pjsip), and there
-   exist better alternatives to acquire the same information, such as the
-   ARI. As a result, the 'DataGet' AMI action as well as the 'data get'
-   CLI command have been removed.
-
-Build System:
- - '--with-pjproject-bundled' is now the default when running ./configure
-   It can be disabled with '--without-pjproject-bundled'.
-
-From 14.6.0 to 14.7.0:
-
-Core:
- - ast_app_parse_timelen now returns an error if it encounters extra characters
-   at the end of the string to be parsed.
-
-From 14.4.0 to 14.5.0:
-
-Core:
- - Support for embedded modules has been removed.  This has not worked in
-   many years.  LOADABLE_MODULES menuselect option is also removed as
-   loadable module support is now always enabled.
-
-From 14.3.0 to 14.4.0:
-
-res_rtp_asterisk:
- - The RTP layer of Asterisk now has support for RFC 5761: "Multiplexing RTP
-   Data and Control Packets on a Single Port." For the PJSIP channel driver,
-   chan_pjsip, you can set "rtcp_mux = yes" on a PJSIP endpoint in pjsip.conf
-   to enable the feature. For chan_sip you can set "rtcp_mux = yes" either
-   globally or on a per-peer basis in sip.conf.
-
-New in 14.0.0
-
-ARI:
- - The policy for when to send "Dial" events has changed. Previously, "Dial"
-   events were sent on the calling channel's topic. However, starting in Asterisk
-   14, if there is no calling channel on which to send the event, the event is
-   instead sent on the called channel's topic. Note that for the ARI channels
-   resource's dial operation, this means that the "Dial" events will always be
-   sent on the called channel's topic.
-
-Queue:
- - When reloading the members of a queue, the members added dynamically (i.e.
-   added via the CLI command "queue add" or the AMI action "QueueAdd") now have
-   their ringinuse value updated to the value of the queue. Previously, the
-   ringinuse value for dynamic members was not updated on reload.
-
-Queue log:
- - New RINGCANCELED event is logged when the caller hangs up while ringing.
-   The data1 field contains number of miliseconds since start of ringing.
-
-Channel Drivers:
-
-chan_dahdi:
- - Support for specifying a DAHDI channel using a path under /dev/dahdi
-   ("by name") has been removed. It was never used. Instead you should
-   use kernel-level channel number allocation using span assignments.
-   See the documentation of dahdi-linux and dahdi-tools.
-
diff --git a/UPGRADE.txt b/UPGRADE.txt
index 87eabde..30dc5d0 100644
--- a/UPGRADE.txt
+++ b/UPGRADE.txt
@@ -21,5 +21,20 @@
 === UPGRADE-12.txt  -- Upgrade info for 11 to 12
 === UPGRADE-13.txt  -- Upgrade info for 12 to 13
 === UPGRADE-14.txt  -- Upgrade info for 13 to 14
-=== UPGRADE-15.txt  -- Upgrade info for 14 to 15
 ===========================================================
+
+New in 15.0.0:
+
+Build System:
+ - '--with-pjproject-bundled' is now the default when running ./configure
+   It can be disabled with '--without-pjproject-bundled'.
+
+Core:
+ - Multi-stream support has been added so a channel can have multiple
+   streams of the same type such as audio and video.
+
+ - The 'Data Retrieval API' has been removed. This API was not actively
+   maintained, was not added to new modules (such as res_pjsip), and there
+   exist better alternatives to acquire the same information, such as the
+   ARI. As a result, the 'DataGet' AMI action as well as the 'data get'
+   CLI command have been removed.

-- 
To view, visit https://gerrit.asterisk.org/6207
To unsubscribe, visit https://gerrit.asterisk.org/settings

Gerrit-Project: asterisk
Gerrit-Branch: 15
Gerrit-MessageType: merged
Gerrit-Change-Id: I4ca2f07ed62d77f1fdd10c3b216f6a28dd75720c
Gerrit-Change-Number: 6207
Gerrit-PatchSet: 2
Gerrit-Owner: Richard Mudgett <rmudgett at digium.com>
Gerrit-Reviewer: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Jenkins2
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-commits/attachments/20170810/4892a0db/attachment-0001.html>

More information about the asterisk-commits mailing list