[asterisk-commits] sample config: Add samples for pubsub to pjsip.conf.sample (asterisk[13])
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Thu Apr 6 08:29:43 CDT 2017
Joshua Colp has submitted this change and it was merged. ( https://gerrit.asterisk.org/5412 )
Change subject: sample_config: Add samples for pubsub to pjsip.conf.sample
......................................................................
sample_config: Add samples for pubsub to pjsip.conf.sample
Added:
* outbound-publish
* resource_list
* inbound-publication
* asterisk-publication
Change-Id: I65043a896c35483f30a92d30b5b118359af7ba5a
---
M configs/samples/pjsip.conf.sample
1 file changed, 141 insertions(+), 0 deletions(-)
Approvals:
Mark Michelson: Looks good to me, but someone else must approve
Anonymous Coward #1000019: Verified
Joshua Colp: Looks good to me, approved
diff --git a/configs/samples/pjsip.conf.sample b/configs/samples/pjsip.conf.sample
index 82cfc09..5ef1c97 100644
--- a/configs/samples/pjsip.conf.sample
+++ b/configs/samples/pjsip.conf.sample
@@ -77,6 +77,8 @@
; * Defines a permission list or references one stored in acl.conf
; * Registration "registration"
; * Contains information about an outbound SIP registration
+; * Resource Lists
+; * Contains information for configuring resource lists.
; * Phone Provisioning "phoneprov"
; * Contains information needed by res_phoneprov for autoprovisioning
@@ -1095,3 +1097,142 @@
; Common variables include LINE, LINEKEYS, etc.
; See phoneprov.conf.sample for others.
;type= ; Must be of type phoneprov (default: "")
+
+
+
+; MODULE PROVIDING BELOW SECTION(S): res_pjsip_outbound_publish
+;======================OUTBOUND_PUBLISHEN SECTION OPTIONS=====================
+; See https://wiki.asterisk.org/wiki/display/AST/Publishing+Extension+State
+; for more information.
+;[outbound-publish]
+;type=outbound-publish ; Must be of type 'outbound-publish'.
+
+;expiration=3600 ; Expiration time for publications in seconds
+
+;outbound_auth= ; Authentication object(s) to be used for outbound
+ ; publishes.
+ ; This is a comma-delimited list of auth sections
+ ; defined in pjsip.conf used to respond to outbound
+ ; authentication challenges.
+ ; Using the same auth section for inbound and
+ ; outbound authentication is not recommended. There
+ ; is a difference in meaning for an empty realm
+ ; setting between inbound and outbound authentication
+ ; uses. See the auth realm description for details.
+
+;outbound_proxy= ; SIP URI of the outbound proxy used to send
+ ; publishes
+
+;server_uri= ; SIP URI of the server and entity to publish to.
+ ; This is the URI at which to find the entity and
+ ; server to send the outbound PUBLISH to.
+ ; This URI is used as the request URI of the outbound
+ ; PUBLISH request from Asterisk.
+
+;from_uri= ; SIP URI to use in the From header.
+ ; This is the URI that will be placed into the From
+ ; header of outgoing PUBLISH messages. If no URI is
+ ; specified then the URI provided in server_uri will
+ ; be used.
+
+;to_uri= ; SIP URI to use in the To header.
+ ; This is the URI that will be placed into the To
+ ; header of outgoing PUBLISH messages. If no URI is
+ ; specified then the URI provided in server_uri will
+ ; be used.
+
+;event= ; Event type of the PUBLISH.
+
+;max_auth_attempts= ; Maximum number of authentication attempts before
+ ; stopping the pub.
+
+;transport= ; Transport used for outbound publish.
+ ; A transport configured in pjsip.conf. As with other
+ ; res_pjsip modules, this will use the first
+ ; available transport of the appropriate type if
+ ; unconfigured.
+
+;multi_user=no ; Enable multi-user support (Asterisk 14+ only)
+
+
+
+; MODULE PROVIDING BELOW SECTION(S): res_pjsip_pubsub
+;=============================RESOURCE-LIST===================================
+; See https://wiki.asterisk.org/wiki/pages/viewpage.action?pageId=30278158
+; for more information.
+;[resource_list]
+;type=resource_list ; Must be of type 'resource_list'.
+
+;event= ; The SIP event package that the list resource.
+ ; belongs to. The SIP event package describes the
+ ; types of resources that Asterisk reports the state
+ ; of.
+
+;list_item= ; The name of a resource to report state on.
+ ; In general Asterisk looks up list items in the
+ ; following way:
+ ; 1. Check if the list item refers to another
+ ; configured resource list.
+ ; 2. Pass the name of the resource off to
+ ; event-package-specific handlers to find the
+ ; specified resource.
+ ; The second part means that the way the list item
+ ; is specified depends on what type of list this is.
+ ; For instance, if you have the event set to
+ ; presence, then list items should be in the form of
+ ; dialplan_extension at dialplan_context. For
+ ; message-summary, mailbox names should be listed.
+
+;full_state=no ; Indicates if the entire list's state should be
+ ; sent out.
+ ; If this option is enabled, and a resource changes
+ ; state, then Asterisk will construct a notification
+ ; that contains the state of all resources in the
+ ; list. If the option is disabled, Asterisk will
+ ; construct a notification that only contains the
+ ; states of resources that have changed.
+ ; NOTE: Even with this option disabled, there are
+ ; certain situations where Asterisk is forced to send
+ ; a notification with the states of all resources in
+ ; the list. When a subscriber renews or terminates
+ ; its subscription to the list, Asterisk MUST send
+ ; a full state notification.
+
+;notification_batch_interval=0
+ ; Time Asterisk should wait, in milliseconds,
+ ; before sending notifications.
+
+;==========================INBOUND_PUBLICATION================================
+; See https://wiki.asterisk.org/wiki/display/AST/Exchanging+Device+and+Mailbox+State+Using+PJSIP
+; for more information.
+;[inbound-publication]
+;type= ; Must be of type 'inbound-publication'.
+
+;endpoint= ; Optional name of an endpoint that is only allowed
+ ; to publish to this resource.
+
+
+; MODULE PROVIDING BELOW SECTION(S): res_pjsip_publish_asterisk
+;==========================ASTERISK_PUBLICATION===============================
+; See https://wiki.asterisk.org/wiki/display/AST/Exchanging+Device+and+Mailbox+State+Using+PJSIP
+; for more information.
+;[asterisk-publication]
+;type=asterisk-publication ; Must be of type 'asterisk-publication'.
+
+;devicestate_publish= ; Optional name of a publish item that can be used
+ ; to publish a req.
+
+;mailboxstate_publish= ; Optional name of a publish item that can be used
+ ; to publish a req.
+
+;device_state=no ; Whether we should permit incoming device state
+ ; events.
+
+;device_state_filter= ; Optional regular expression used to filter what
+ ; devices we accept events for.
+
+;mailbox_state=no ; Whether we should permit incoming mailbox state
+ ; events.
+
+;mailbox_state_filter= ; Optional regular expression used to filter what
+ ; mailboxes we accept events for.
--
To view, visit https://gerrit.asterisk.org/5412
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: merged
Gerrit-Change-Id: I65043a896c35483f30a92d30b5b118359af7ba5a
Gerrit-PatchSet: 1
Gerrit-Project: asterisk
Gerrit-Branch: 13
Gerrit-Owner: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Anonymous Coward #1000019
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Mark Michelson <mmichelson at digium.com>
More information about the asterisk-commits
mailing list