[asterisk-commits] bundled pjproject: Add tests for programs used by the Makef... (asterisk[13])

SVN commits to the Asterisk project asterisk-commits at lists.digium.com
Wed Oct 12 11:04:56 CDT 2016


Anonymous Coward #1000019 has submitted this change and it was merged.

Change subject: bundled_pjproject:  Add tests for programs used by the Makefile, et al.
......................................................................


bundled_pjproject:  Add tests for programs used by the Makefile, et al.

Added tests for bzip2, tar, patch, sed and nm to configure.ac.

Set DOWNLOAD_TO_STDOUT to a working command line regardless of
whether the download program is wget, curl or fetch.

Added a 'configure.m4' file to the third-party directory which takes
care of calling any third-party project setup.  Had to move some
pjproject_bundled stuff up in configure.ac so it was called before
the third-party configure macro.

The pjproject tarball is now downloaded to the externals_cache_dir if
it was specified on the ./configure command line

Removed regeneration of the pjproject aconfigure file.  It was only
needed for an old patch that no longer applies.

Converted the tests for symbols to explicit tests since we know that
they're now available in the bundled version.  Saves a little time
during configure.

ASTERISK-26416 #close
Reported-by: Corey Farrell

Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b
---
M Makefile
M configure
M configure.ac
M include/asterisk/autoconfig.h.in
M makeopts.in
M third-party/Makefile.rules
A third-party/configure.m4
M third-party/pjproject/Makefile
M third-party/pjproject/apply_patches
M third-party/pjproject/configure.m4
10 files changed, 490 insertions(+), 399 deletions(-)

Approvals:
  Anonymous Coward #1000019: Verified
  Matthew Fredrickson: Looks good to me, approved
  Joshua Colp: Looks good to me, but someone else must approve
  Corey Farrell: Looks good to me, but someone else must approve



diff --git a/Makefile b/Makefile
index 938ecfe..b746d7b 100644
--- a/Makefile
+++ b/Makefile
@@ -99,6 +99,10 @@
 export LDCONFIG
 export LDCONFIG_FLAGS
 export PYTHON
+export TAR
+export PATCH
+export SED
+export NM
 
 # makeopts is required unless the goal is clean or distclean
 ifeq ($(findstring clean,$(MAKECMDGOALS)),)
diff --git a/configure b/configure
index 6f40dcc..907faca 100755
--- a/configure
+++ b/configure
@@ -957,11 +957,6 @@
 PJSIP_DLG_CREATE_UAS_AND_INC_LOCK_DIR
 PJSIP_DLG_CREATE_UAS_AND_INC_LOCK_INCLUDE
 PJSIP_DLG_CREATE_UAS_AND_INC_LOCK_LIB
-PJPROJECT_BUNDLED
-PBX_PJPROJECT
-PJPROJECT_DIR
-PJPROJECT_INCLUDE
-PJPROJECT_LIB
 PBX_PGSQL
 PGSQL_DIR
 PGSQL_INCLUDE
@@ -1174,6 +1169,11 @@
 ALSA_DIR
 ALSA_INCLUDE
 ALSA_LIB
+PJPROJECT_INCLUDE
+PJPROJECT_LIB
+PBX_PJPROJECT
+PJPROJECT_DIR
+PJPROJECT_BUNDLED
 AST_C_COMPILER_FAMILY
 AST_CLANG_BLOCKS
 AST_CLANG_BLOCKS_LIBS
@@ -1195,8 +1195,13 @@
 OPENSSL
 SHA1SUM
 LDCONFIG
+DOWNLOAD_TO_STDOUT
 DOWNLOAD
 FETCH
+NM
+PATCH
+TAR
+BZIP2
 ALEMBIC
 GIT
 BASH
@@ -1301,7 +1306,6 @@
 docdir
 oldincludedir
 includedir
-runstatedir
 localstatedir
 sharedstatedir
 sysconfdir
@@ -1327,6 +1331,7 @@
 with_gnu_ld
 enable_dev_mode
 enable_coverage
+with_pjproject_bundled
 with_asound
 with_bfd
 with_execinfo
@@ -1377,7 +1382,6 @@
 with_oss
 with_postgres
 with_pjproject
-with_pjproject_bundled
 with_popt
 with_portaudio
 with_pri
@@ -1481,7 +1485,6 @@
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-runstatedir='${localstatedir}/run'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
 docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
@@ -1734,15 +1737,6 @@
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
 
-  -runstatedir | --runstatedir | --runstatedi | --runstated \
-  | --runstate | --runstat | --runsta | --runst | --runs \
-  | --run | --ru | --r)
-    ac_prev=runstatedir ;;
-  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
-  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
-  | --run=* | --ru=* | --r=*)
-    runstatedir=$ac_optarg ;;
-
   -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
     ac_prev=sbindir ;;
   -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
@@ -1880,7 +1874,7 @@
 for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
 		datadir sysconfdir sharedstatedir localstatedir includedir \
 		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir runstatedir
+		libdir localedir mandir
 do
   eval ac_val=\$$ac_var
   # Remove trailing slashes.
@@ -2033,7 +2027,6 @@
   --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
   --libdir=DIR            object code libraries [EPREFIX/lib]
   --includedir=DIR        C header files [PREFIX/include]
   --oldincludedir=DIR     C header files for non-gcc [/usr/include]
@@ -2079,6 +2072,8 @@
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-pjproject-bundled
+                          Use bundled pjproject libraries
   --with-asound=PATH      use Advanced Linux Sound Architecture files in PATH
   --with-bfd=PATH         use Debug symbol decoding files in PATH
   --with-execinfo=PATH    use Stack Backtrace files in PATH
@@ -2133,8 +2128,6 @@
   --with-oss=PATH         use Open Sound System files in PATH
   --with-postgres=PATH    use PostgreSQL files in PATH
   --with-pjproject=PATH   use PJPROJECT files in PATH
-  --with-pjproject-bundled
-                          Use bundled pjproject libraries
   --with-popt=PATH        use popt files in PATH
   --with-portaudio=PATH   use PortAudio files in PATH
   --with-pri=PATH         use ISDN PRI files in PATH
@@ -7615,10 +7608,218 @@
 fi
 
 
+# Extract the first word of "bzip2", so it can be a program name with args.
+set dummy bzip2; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_BZIP2+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $BZIP2 in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_BZIP2="$BZIP2" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_BZIP2="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_BZIP2" && ac_cv_path_BZIP2=":"
+  ;;
+esac
+fi
+BZIP2=$ac_cv_path_BZIP2
+if test -n "$BZIP2"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BZIP2" >&5
+$as_echo "$BZIP2" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+# Extract the first word of "tar", so it can be a program name with args.
+set dummy tar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_TAR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $TAR in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_TAR="$TAR" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_TAR" && ac_cv_path_TAR=":"
+  ;;
+esac
+fi
+TAR=$ac_cv_path_TAR
+if test -n "$TAR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR" >&5
+$as_echo "$TAR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+# Extract the first word of "patch", so it can be a program name with args.
+set dummy patch; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PATCH+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $PATCH in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PATCH="$PATCH" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_PATCH="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_PATCH" && ac_cv_path_PATCH=":"
+  ;;
+esac
+fi
+PATCH=$ac_cv_path_PATCH
+if test -n "$PATCH"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PATCH" >&5
+$as_echo "$PATCH" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+# Extract the first word of "sed", so it can be a program name with args.
+set dummy sed; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $SED in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_SED="$SED" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_SED="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_SED" && ac_cv_path_SED=":"
+  ;;
+esac
+fi
+SED=$ac_cv_path_SED
+if test -n "$SED"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SED" >&5
+$as_echo "$SED" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+# Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $NM in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_NM="$NM" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_NM="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_NM" && ac_cv_path_NM=":"
+  ;;
+esac
+fi
+NM=$ac_cv_path_NM
+if test -n "$NM"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
+$as_echo "$NM" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
 if test "${WGET}" != ":" ; then
   DOWNLOAD=${WGET}
+  DOWNLOAD_TO_STDOUT="${WGET} -O-"
 else if test "${CURL}" != ":" ; then
   DOWNLOAD="${CURL} -O --progress-bar -w \"%{url_effective}\n\""
+  DOWNLOAD_TO_STDOUT="${CURL} -L --progress-bar -w \"%{url_effective}\n\""
 else
   # Extract the first word of "fetch", so it can be a program name with args.
 set dummy fetch; ac_word=$2
@@ -7662,8 +7863,11 @@
 
 
   DOWNLOAD=${FETCH}
+  DOWNLOAD_TO_STDOUT="${FETCH} -o-"
 fi
 fi
+
+
 
 # Extract the first word of "ldconfig", so it can be a program name with args.
 set dummy ldconfig; ac_word=$2
@@ -8888,6 +9092,118 @@
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 	CFLAGS="$save_CFLAGS"
+
+
+PJPROJECT_BUNDLED=no
+
+
+
+# Check whether --with-pjproject-bundled was given.
+if test "${with_pjproject_bundled+set}" = set; then :
+  withval=$with_pjproject_bundled; case "${enableval}" in
+	      n|no) PJPROJECT_BUNDLED=no ;;
+	      *) PJPROJECT_BUNDLED=yes ;;
+	esac
+fi
+
+
+
+
+	if test "$PJPROJECT_BUNDLED" = "yes" ; then
+
+	if test "${ac_mandatory_list#*PJPROJECT*}" != "$ac_mandatory_list" ; then
+		as_fn_error $? "--with-pjproject and --with-pjproject-bundled can't both be specified" "$LINENO" 5
+	fi
+
+	ac_mandatory_list="$ac_mandatory_list PJPROJECT"
+	PJPROJECT_DIR="${ac_top_build_prefix}third-party/pjproject"
+
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for embedded pjproject (may have to download)" >&5
+$as_echo_n "checking for embedded pjproject (may have to download)... " >&6; }
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: configuring" >&5
+$as_echo "configuring" >&6; }
+
+	if test "x${DOWNLOAD_TO_STDOUT}" = "x" ; then
+		as_fn_error $? "A download utility (wget, curl or fetch) is required to download bundled pjproject" "$LINENO" 5
+	fi
+	if test "${BZIP2}" = ":" ; then
+		as_fn_error $? "bzip2 is required to extract the pjproject tar file" "$LINENO" 5
+	fi
+	if test "${TAR}" = ":" ; then
+		as_fn_error $? "tar is required to extract the pjproject tar file" "$LINENO" 5
+	fi
+	if test "${PATCH}" = ":" ; then
+		as_fn_error $? "patch is required to configure bundled pjproject" "$LINENO" 5
+	fi
+	if test "${SED}" = ":" ; then
+		as_fn_error $? "sed is required to configure bundled pjproject" "$LINENO" 5
+	fi
+	if test "${NM}" = ":" ; then
+		as_fn_error $? "nm is required to build bundled pjproject" "$LINENO" 5
+	fi
+
+	export TAR PATCH SED NM EXTERNALS_CACHE_DIR DOWNLOAD_TO_STDOUT
+	${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} configure
+	if test $? -ne 0 ; then
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: Unable to configure ${PJPROJECT_DIR}" >&5
+$as_echo "$as_me: Unable to configure ${PJPROJECT_DIR}" >&6;}
+		as_fn_error $? "Run \"${GNU_MAKE} -C ${PJPROJECT_DIR} NOISY_BUILD=yes configure\" to see error details." "$LINENO" 5
+	fi
+
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for bundled pjproject" >&5
+$as_echo_n "checking for bundled pjproject... " >&6; }
+
+	PJPROJECT_INCLUDE=$(${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} echo_cflags)
+	PJPROJECT_CFLAGS="$PJPROJECT_INCLUDE"
+	PBX_PJPROJECT=1
+
+
+$as_echo "#define HAVE_PJPROJECT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_PJPROJECT_BUNDLED 1" >>confdefs.h
+
+
+
+$as_echo "#define HAVE_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_PJ_TRANSACTION_GRP_LOCK 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_PJSIP_REPLACE_MEDIA_STREAM 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_PJSIP_GET_DEST_INFO 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_PJ_SSL_CERT_LOAD_FROM_FILES2 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_PJSIP_EXTERNAL_RESOLVER 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_PJSIP_TLS_TRANSPORT_PROTO 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_PJSIP_EVSUB_GRP_LOCK 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_PJSIP_INV_SESSION_REF 1" >>confdefs.h
+
+
+
+
+
+
+
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+	fi
+
 
 
 # AST_EXT_LIB_SETUP is used to tell configure to handle variables for
@@ -10875,6 +11191,7 @@
 
 
 
+if test "x${PBX_PJPROJECT}" != "x1" ; then
 
     PJPROJECT_DESCRIP="PJPROJECT"
     PJPROJECT_OPTION="pjproject"
@@ -10906,29 +11223,6 @@
 
 
 
-
-PJPROJECT_BUNDLED=no
-
-
-
-# Check whether --with-pjproject-bundled was given.
-if test "${with_pjproject_bundled+set}" = set; then :
-  withval=$with_pjproject_bundled; case "${enableval}" in
-	      n|no) PJPROJECT_BUNDLED=no ;;
-	      *) PJPROJECT_BUNDLED=yes ;;
-	esac
-fi
-
-
-
-if test "$PJPROJECT_BUNDLED" = "yes" -a "${ac_mandatory_list#*PJPROJECT*}" != "$ac_mandatory_list" ; then
-   as_fn_error $? "--with-pjproject and --with-pjproject-bundled can't both be specified" "$LINENO" 5
-fi
-
-if test "$PJPROJECT_BUNDLED" = "yes" ; then
-   ac_mandatory_list="$ac_mandatory_list PJPROJECT"
-   PJPROJECT_DIR="${ac_top_build_prefix}third-party/pjproject"
-fi
 
 
 PJSIP_DLG_CREATE_UAS_AND_INC_LOCK_DESCRIP="PJSIP Dialog Create UAS with Incremented Lock"
@@ -11038,6 +11332,7 @@
 
 
 
+fi
 
 
     POPT_DESCRIP="popt"
@@ -24747,251 +25042,7 @@
 fi
 
 if test "$USE_PJPROJECT" != "no" ; then
-   if test "$PJPROJECT_BUNDLED" = "yes" ; then
-
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for embedded pjproject (may have to download)" >&5
-$as_echo_n "checking for embedded pjproject (may have to download)... " >&6; }
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: configuring" >&5
-$as_echo "configuring" >&6; }
-	${GNU_MAKE} --quiet --no-print-directory -C $PJPROJECT_DIR configure
-	if test $? -ne 0 ; then
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
-$as_echo "failed" >&6; }
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: Unable to configure $PJPROJECT_DIR" >&5
-$as_echo "$as_me: Unable to configure $PJPROJECT_DIR" >&6;}
-		as_fn_error $? "Run \"${GNU_MAKE} -C $PJPROJECT_DIR NOISY_BUILD=yes configure\" to see error details." "$LINENO" 5
-	fi
-
-	PJPROJECT_INCLUDE=$(${GNU_MAKE} --quiet --no-print-directory -C $PJPROJECT_DIR echo_cflags)
-	PJPROJECT_CFLAGS="$PJPROJECT_INCLUDE"
-	PBX_PJPROJECT=1
-	PJPROJECT_BUNDLED=yes
-
-$as_echo "#define HAVE_PJPROJECT 1" >>confdefs.h
-
-
-$as_echo "#define HAVE_PJPROJECT_BUNDLED 1" >>confdefs.h
-
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for embedded pjproject" >&5
-$as_echo_n "checking for embedded pjproject... " >&6; }
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-
-	PJSIP_DLG_CREATE_UAS_AND_INC_LOCK_INCLUDE="$PJPROJECT_INCLUDE"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pjsip_dlg_create_uas_and_inc_lock declared in pjsip.h" >&5
-$as_echo_n "checking for pjsip_dlg_create_uas_and_inc_lock declared in pjsip.h... " >&6; }
-
-	saved_cpp="$CPPFLAGS"
-	CPPFLAGS="$PJPROJECT_INCLUDE"
-	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <pjsip.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "pjsip_dlg_create_uas_and_inc_lock" >/dev/null 2>&1; then :
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		PBX_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK=1
-
-$as_echo "#define HAVE_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK 1" >>confdefs.h
-
-
-else
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-fi
-rm -f conftest*
-
-
-	CPPGLAGS="$saved_cpp"
-	PJSIP_DLG_CREATE_UAS_AND_INC_LOCK_INCLUDE="$PJPROJECT_INCLUDE"
-
-
-	PJ_TRANSACTION_GRP_LOCK_INCLUDE="$PJPROJECT_INCLUDE"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pjsip_tsx_create_uac2 declared in pjsip.h" >&5
-$as_echo_n "checking for pjsip_tsx_create_uac2 declared in pjsip.h... " >&6; }
-
-	saved_cpp="$CPPFLAGS"
-	CPPFLAGS="$PJPROJECT_INCLUDE"
-	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <pjsip.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "pjsip_tsx_create_uac2" >/dev/null 2>&1; then :
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		PBX_PJ_TRANSACTION_GRP_LOCK=1
-
-$as_echo "#define HAVE_PJ_TRANSACTION_GRP_LOCK 1" >>confdefs.h
-
-
-else
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-fi
-rm -f conftest*
-
-
-	CPPGLAGS="$saved_cpp"
-	PJ_TRANSACTION_GRP_LOCK_INCLUDE="$PJPROJECT_INCLUDE"
-
-
-	PJSIP_REPLACE_MEDIA_STREAM_INCLUDE="$PJPROJECT_INCLUDE"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PJMEDIA_SDP_NEG_ALLOW_MEDIA_CHANGE declared in pjmedia.h" >&5
-$as_echo_n "checking for PJMEDIA_SDP_NEG_ALLOW_MEDIA_CHANGE declared in pjmedia.h... " >&6; }
-
-	saved_cpp="$CPPFLAGS"
-	CPPFLAGS="$PJPROJECT_INCLUDE"
-	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <pjmedia.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "PJMEDIA_SDP_NEG_ALLOW_MEDIA_CHANGE" >/dev/null 2>&1; then :
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		PBX_PJSIP_REPLACE_MEDIA_STREAM=1
-
-$as_echo "#define HAVE_PJSIP_REPLACE_MEDIA_STREAM 1" >>confdefs.h
-
-
-else
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-fi
-rm -f conftest*
-
-
-	CPPGLAGS="$saved_cpp"
-	PJSIP_REPLACE_MEDIA_STREAM_INCLUDE="$PJPROJECT_INCLUDE"
-
-
-	PJSIP_GET_DEST_INFO_INCLUDE="$PJPROJECT_INCLUDE"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pjsip_get_dest_info declared in pjsip.h" >&5
-$as_echo_n "checking for pjsip_get_dest_info declared in pjsip.h... " >&6; }
-
-	saved_cpp="$CPPFLAGS"
-	CPPFLAGS="$PJPROJECT_INCLUDE"
-	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <pjsip.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "pjsip_get_dest_info" >/dev/null 2>&1; then :
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		PBX_PJSIP_GET_DEST_INFO=1
-
-$as_echo "#define HAVE_PJSIP_GET_DEST_INFO 1" >>confdefs.h
-
-
-else
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-fi
-rm -f conftest*
-
-
-	CPPGLAGS="$saved_cpp"
-	PJSIP_GET_DEST_INFO_INCLUDE="$PJPROJECT_INCLUDE"
-
-
-	PJ_SSL_CERT_LOAD_FROM_FILES2_INCLUDE="$PJPROJECT_INCLUDE"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pj_ssl_cert_load_from_files2 declared in pjlib.h" >&5
-$as_echo_n "checking for pj_ssl_cert_load_from_files2 declared in pjlib.h... " >&6; }
-
-	saved_cpp="$CPPFLAGS"
-	CPPFLAGS="$PJPROJECT_INCLUDE"
-	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <pjlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "pj_ssl_cert_load_from_files2" >/dev/null 2>&1; then :
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		PBX_PJ_SSL_CERT_LOAD_FROM_FILES2=1
-
-$as_echo "#define HAVE_PJ_SSL_CERT_LOAD_FROM_FILES2 1" >>confdefs.h
-
-
-else
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-fi
-rm -f conftest*
-
-
-	CPPGLAGS="$saved_cpp"
-	PJ_SSL_CERT_LOAD_FROM_FILES2_INCLUDE="$PJPROJECT_INCLUDE"
-
-
-	PJSIP_EXTERNAL_RESOLVER_INCLUDE="$PJPROJECT_INCLUDE"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pjsip_endpt_set_ext_resolver declared in pjsip.h" >&5
-$as_echo_n "checking for pjsip_endpt_set_ext_resolver declared in pjsip.h... " >&6; }
-
-	saved_cpp="$CPPFLAGS"
-	CPPFLAGS="$PJPROJECT_INCLUDE"
-	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <pjsip.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "pjsip_endpt_set_ext_resolver" >/dev/null 2>&1; then :
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-		PBX_PJSIP_EXTERNAL_RESOLVER=1
-
-$as_echo "#define HAVE_PJSIP_EXTERNAL_RESOLVER 1" >>confdefs.h
-
-
-else
-
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-fi
-rm -f conftest*
-
-
-	CPPGLAGS="$saved_cpp"
-	PJSIP_EXTERNAL_RESOLVER_INCLUDE="$PJPROJECT_INCLUDE"
-
-
-$as_echo "#define HAVE_PJSIP_TLS_TRANSPORT_PROTO 1" >>confdefs.h
-
-
-$as_echo "#define HAVE_PJSIP_EVSUB_GRP_LOCK 1" >>confdefs.h
-
-
-$as_echo "#define HAVE_PJSIP_INV_SESSION_REF 1" >>confdefs.h
-
-
-   else
+   if test "$PJPROJECT_BUNDLED" = "no" ; then
 
    if test "x${PBX_PJPROJECT}" != "x1" -a "${USE_PJPROJECT}" != "no"; then
 
diff --git a/configure.ac b/configure.ac
index 521f02a..b47bc59 100644
--- a/configure.ac
+++ b/configure.ac
@@ -285,16 +285,27 @@
 AC_PATH_PROG([BASH], [bash], :)
 AC_PATH_PROG([GIT], [git], :)
 AC_PATH_PROG([ALEMBIC], [alembic], :)
+AC_PATH_PROG([BZIP2], [bzip2], :)
+AC_PATH_PROG([TAR], [tar], :)
+AC_PATH_PROG([PATCH], [patch], :)
+AC_PATH_PROG([SED], [sed], :)
+AC_PATH_PROG([NM], [nm], :)
+
 if test "${WGET}" != ":" ; then
   DOWNLOAD=${WGET}
+  DOWNLOAD_TO_STDOUT="${WGET} -O-"
 else if test "${CURL}" != ":" ; then
   DOWNLOAD="${CURL} -O --progress-bar -w \"%{url_effective}\n\""
+  DOWNLOAD_TO_STDOUT="${CURL} -L --progress-bar -w \"%{url_effective}\n\""
 else
   AC_PATH_PROG([FETCH], [fetch], [:])
   DOWNLOAD=${FETCH}
+  DOWNLOAD_TO_STDOUT="${FETCH} -o-"
 fi
 fi
+
 AC_SUBST(DOWNLOAD)
+AC_SUBST(DOWNLOAD_TO_STDOUT)
 AC_PATH_PROG([LDCONFIG], [ldconfig], :)
 AC_PATH_PROG([SHA1SUM], [sha1sum], $ac_aux_dir/build_tools/sha1sum-sh)
 AC_PATH_PROG([OPENSSL], [openssl], :)
@@ -405,6 +416,19 @@
 AST_CHECK_RAII()
 AST_CHECK_STRSEP_ARRAY_BOUNDS()
 
+PJPROJECT_BUNDLED=no
+AH_TEMPLATE(m4_bpatsubst([[HAVE_PJPROJECT_BUNDLED]], [(.*)]), [Define to 1 when using the bundled pjproject.])
+
+AC_ARG_WITH([pjproject-bundled],
+	[AS_HELP_STRING([--with-pjproject-bundled],
+		[Use bundled pjproject libraries])],
+	[case "${enableval}" in
+	      n|no) PJPROJECT_BUNDLED=no ;;
+	      *) PJPROJECT_BUNDLED=yes ;;
+	esac])
+
+THIRD_PARTY_CONFIGURE()
+
 # AST_EXT_LIB_SETUP is used to tell configure to handle variables for
 # various packages.
 # $1 is the prefix for the variables in makeopts and autoconfig.h
@@ -472,28 +496,8 @@
 AST_EXT_LIB_SETUP([OSS], [Open Sound System], [oss])
 AST_EXT_LIB_SETUP([PGSQL], [PostgreSQL], [postgres])
 
+if test "x${PBX_PJPROJECT}" != "x1" ; then
 AST_EXT_LIB_SETUP([PJPROJECT], [PJPROJECT], [pjproject])
-PJPROJECT_BUNDLED=no
-AH_TEMPLATE(m4_bpatsubst([[HAVE_PJPROJECT_BUNDLED]], [(.*)]), [Define to 1 when using the bundled pjproject.])
-
-AC_ARG_WITH([pjproject-bundled],
-	[AS_HELP_STRING([--with-pjproject-bundled],
-		[Use bundled pjproject libraries])],
-	[case "${enableval}" in
-	      n|no) PJPROJECT_BUNDLED=no ;;
-	      *) PJPROJECT_BUNDLED=yes ;;
-	esac])
-AC_SUBST(PJPROJECT_BUNDLED)
-
-if test "$PJPROJECT_BUNDLED" = "yes" -a "${ac_mandatory_list#*PJPROJECT*}" != "$ac_mandatory_list" ; then
-   AC_MSG_ERROR(--with-pjproject and --with-pjproject-bundled can't both be specified)
-fi
-
-if test "$PJPROJECT_BUNDLED" = "yes" ; then
-   ac_mandatory_list="$ac_mandatory_list PJPROJECT"
-   PJPROJECT_DIR="${ac_top_build_prefix}third-party/pjproject"
-fi
-
 AST_EXT_LIB_SETUP_OPTIONAL([PJSIP_DLG_CREATE_UAS_AND_INC_LOCK], [PJSIP Dialog Create UAS with Incremented Lock], [PJPROJECT], [pjsip])
 AST_EXT_LIB_SETUP_OPTIONAL([PJ_TRANSACTION_GRP_LOCK], [PJSIP Transaction Group Lock Support], [PJPROJECT], [pjsip])
 AST_EXT_LIB_SETUP_OPTIONAL([PJSIP_REPLACE_MEDIA_STREAM], [PJSIP Media Stream Replacement Support], [PJPROJECT], [pjsip])
@@ -503,6 +507,7 @@
 AST_EXT_LIB_SETUP_OPTIONAL([PJSIP_TLS_TRANSPORT_PROTO], [PJSIP TLS Transport proto field support], [PJPROJECT], [pjsip])
 AST_EXT_LIB_SETUP_OPTIONAL([PJSIP_EVSUB_GRP_LOCK], [PJSIP EVSUB Group Lock support], [PJPROJECT], [pjsip])
 AST_EXT_LIB_SETUP_OPTIONAL([PJSIP_INV_SESSION_REF], [PJSIP INVITE Session Reference Count support], [PJPROJECT], [pjsip])
+fi
 
 AST_EXT_LIB_SETUP([POPT], [popt], [popt])
 AST_EXT_LIB_SETUP([PORTAUDIO], [PortAudio], [portaudio])
@@ -2178,9 +2183,7 @@
 fi
 
 if test "$USE_PJPROJECT" != "no" ; then
-   if test "$PJPROJECT_BUNDLED" = "yes" ; then
-       PJPROJECT_CONFIGURE([$PJPROJECT_DIR])
-   else
+   if test "$PJPROJECT_BUNDLED" = "no" ; then
       AST_PKG_CONFIG_CHECK([PJPROJECT], [libpjproject])
 
       AST_EXT_LIB_CHECK([PJSIP_DLG_CREATE_UAS_AND_INC_LOCK], [pjsip], [pjsip_dlg_create_uas_and_inc_lock], [pjsip.h], [$PJPROJECT_LIBS], [$PJPROJECT_CFLAGS])
diff --git a/include/asterisk/autoconfig.h.in b/include/asterisk/autoconfig.h.in
index 0fc13cf..55189e2 100644
--- a/include/asterisk/autoconfig.h.in
+++ b/include/asterisk/autoconfig.h.in
@@ -584,19 +584,22 @@
 /* Define if your system has PJPROJECT_BUNDLED */
 #undef HAVE_PJPROJECT_BUNDLED
 
-/* Define if your system has pjsip_dlg_create_uas_and_inc_lock declared. */
+/* Define to 1 if PJPROJECT has the PJSIP Dialog Create UAS with Incremented
+   Lock feature. */
 #undef HAVE_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK
 
-/* Define if your system has PJSIP_EVSUB_GRP_LOCK */
+/* Define to 1 if PJPROJECT has the PJSIP EVSUB Group Lock support feature. */
 #undef HAVE_PJSIP_EVSUB_GRP_LOCK
 
-/* Define if your system has pjsip_endpt_set_ext_resolver declared. */
+/* Define to 1 if PJPROJECT has the PJSIP External Resolver Support feature.
+   */
 #undef HAVE_PJSIP_EXTERNAL_RESOLVER
 
-/* Define if your system has pjsip_get_dest_info declared. */
+/* Define to 1 if PJPROJECT has the pjsip_get_dest_info support feature. */
 #undef HAVE_PJSIP_GET_DEST_INFO
 
-/* Define if your system has PJSIP_INV_SESSION_REF */
+/* Define to 1 if PJPROJECT has the PJSIP INVITE Session Reference Count
+   support feature. */
 #undef HAVE_PJSIP_INV_SESSION_REF
 
 /* Define if your system has the PJSIP_REPLACE_MEDIA_STREAM headers. */
@@ -605,10 +608,12 @@
 /* Define if your system has the PJSIP_TLS_TRANSPORT_PROTO headers. */
 #undef HAVE_PJSIP_TLS_TRANSPORT_PROTO
 
-/* Define if your system has pj_ssl_cert_load_from_files2 declared. */
+/* Define to 1 if PJPROJECT has the pj_ssl_cert_load_from_files2 support
+   feature. */
 #undef HAVE_PJ_SSL_CERT_LOAD_FROM_FILES2
 
-/* Define if your system has pjsip_tsx_create_uac2 declared. */
+/* Define to 1 if PJPROJECT has the PJSIP Transaction Group Lock Support
+   feature. */
 #undef HAVE_PJ_TRANSACTION_GRP_LOCK
 
 /* Define to 1 if your system defines IP_PKTINFO. */
diff --git a/makeopts.in b/makeopts.in
index 20cbade..fed5030 100644
--- a/makeopts.in
+++ b/makeopts.in
@@ -27,6 +27,7 @@
 WGET=@WGET@
 FETCH=@FETCH@
 DOWNLOAD=@DOWNLOAD@
+DOWNLOAD_TO_STDOUT=@DOWNLOAD_TO_STDOUT@
 SOUNDS_CACHE_DIR=@SOUNDS_CACHE_DIR@
 EXTERNALS_CACHE_DIR=@EXTERNALS_CACHE_DIR@
 RUBBER=@RUBBER@
@@ -41,6 +42,10 @@
 LDCONFIG=@LDCONFIG@
 GIT=@GIT@
 ALEMBIC=@ALEMBIC@
+TAR=@TAR@
+PATCH=@PATCH@
+SED=@SED@
+NM=@NM@
 
 BUILD_PLATFORM=@BUILD_PLATFORM@
 BUILD_CPU=@BUILD_CPU@
diff --git a/third-party/Makefile.rules b/third-party/Makefile.rules
index 92e4ebc..4f804dd 100644
--- a/third-party/Makefile.rules
+++ b/third-party/Makefile.rules
@@ -13,18 +13,6 @@
 REALLY_QUIET=
 endif
 
-DOWNLOAD := $(shell which wget 2>/dev/null)
-DOWNLOAD := $(if $(DOWNLOAD),$(DOWNLOAD) -O- ,)
-
-ifeq ($(DOWNLOAD),)
-DOWNLOAD := $(shell which curl 2>/dev/null)
-DOWNLOAD := $(if $(DOWNLOAD), $(DOWNLOAD) -L ,)
-endif
-
-ifeq ($(DOWNLOAD),)
-DOWNLOAD := echo "No download program available" ; exit 1;
-endif
-
 export SUBMAKE
 export ECHO_PREFIX
 export CMD_PREFIX
@@ -34,3 +22,8 @@
 export ASTSBINDIR
 export DESTDIR
 export ASTDATADIR
+export TAR
+export PATCH
+export SED
+export NM
+export DOWNLOAD
diff --git a/third-party/configure.m4 b/third-party/configure.m4
new file mode 100644
index 0000000..6354466
--- /dev/null
+++ b/third-party/configure.m4
@@ -0,0 +1,7 @@
+
+
+AC_DEFUN([THIRD_PARTY_CONFIGURE],
+[
+	PJPROJECT_CONFIGURE()
+])
+
diff --git a/third-party/pjproject/Makefile b/third-party/pjproject/Makefile
index bb98a09..3fd3be7 100644
--- a/third-party/pjproject/Makefile
+++ b/third-party/pjproject/Makefile
@@ -7,8 +7,6 @@
 ifneq ($(findstring configure,$(MAKECMDGOALS))$(findstring echo_cflags,$(MAKECMDGOALS)),)
 # Run from $(ASTTOPDIR)/configure
     SPECIAL_TARGETS += configure
-    include ../Makefile.rules
-    include Makefile.rules
 endif
 
 ifeq ($(findstring echo_cflags,$(MAKECMDGOALS)),echo_cflags)
@@ -19,8 +17,10 @@
 ifeq ($(findstring clean,$(MAKECMDGOALS)),clean)
 # clean or distclean
     SPECIAL_TARGETS += clean
-    include ../Makefile.rules
-    include Makefile.rules
+endif
+
+ifneq ($(wildcard ../../makeopts),)
+    include ../../makeopts
 endif
 
 ifeq ($(SPECIAL_TARGETS),)
@@ -28,17 +28,17 @@
     ifeq ($(wildcard ../../makeopts),)
         $(error ASTTOPDIR/configure hasn't been run)
     endif
-    include ../../makeopts
 
     ifeq ($(PJPROJECT_BUNDLED),yes)
-        -include ../../menuselect.makeopts
-        include ../Makefile.rules
+        ifneq ($(wildcard ../../menuselect.makeopts),)
+            include ../../menuselect.makeopts
+        else
+            $(warning ASTTOPDIR/menuselect hasn't been run yet.  Can't find debug options.)
+        endif
 
         all: _all
         install: _install
 
-        include ../../Makefile.rules
-        include Makefile.rules
         include source/user.mak
         include source/build.mak
         CF := $(filter-out -W%,$(CC_CFLAGS))
@@ -66,25 +66,25 @@
     endif
 endif
 
+include ../../Makefile.rules
+include ../Makefile.rules
+include Makefile.rules
+
 ECHO_PREFIX := $(ECHO_PREFIX) echo '[pjproject] '
 
-ifndef $(TMPDIR)
-    ifneq ($(wildcard /tmp),)
-        TMPDIR=/tmp
-    else
-        TMPDIR=.
-    endif
-endif
+_all: $(TARGETS)
+
+TMPDIR ?= $(or $(EXTERNALS_CACHE_DIR),$(wildcard /tmp),.)
 
 $(TMPDIR)/pjproject-$(PJPROJECT_VERSION).tar.bz2 : ../versions.mak
-	$(ECHO_PREFIX) Downloading $@ with $(DOWNLOAD)
-	$(CMD_PREFIX) $(DOWNLOAD) $(PJPROJECT_URL)/$(@F) > $@
+	$(ECHO_PREFIX) Downloading $(PJPROJECT_URL)/$(@F) to $@
+	$(CMD_PREFIX) $(DOWNLOAD_TO_STDOUT) $(PJPROJECT_URL)/$(@F) > $@
 
 source/.unpacked: $(TMPDIR)/pjproject-$(PJPROJECT_VERSION).tar.bz2
 	$(ECHO_PREFIX) Unpacking $<
 	- at rm -rf source >/dev/null 2>&1
 	- at mkdir source >/dev/null 2>&1
-	$(CMD_PREFIX) tar --strip-components=1 -C source -xjf $<
+	$(CMD_PREFIX) $(TAR) --strip-components=1 -C source -xjf $<
 	$(ECHO_PREFIX) Applying patches
 	$(CMD_PREFIX) ./apply_patches $(QUIET_CONFIGURE) ./patches ./source
 	- at touch source/.unpacked
@@ -99,8 +99,8 @@
 
 build.mak: source/.unpacked $(addprefix source/pjlib/include/pj/,$(notdir $(wildcard ./patches/*.h))) source/user.mak Makefile.rules
 	$(ECHO_PREFIX) Configuring with $(PJPROJECT_CONFIG_OPTS)
-	$(CMD_PREFIX) (cd source ; autoconf aconfigure.ac > aconfigure && ./aconfigure $(QUIET_CONFIGURE) $(PJPROJECT_CONFIG_OPTS))
-	@sed -r -e "/prefix|export PJ_SHARED_LIBRARIES|MACHINE_NAME|OS_NAME|HOST_NAME|CC_NAME|CROSS_COMPILE|LINUX_POLL/d" source/build.mak > build.mak
+	$(CMD_PREFIX) (cd source ; ./aconfigure $(QUIET_CONFIGURE) $(PJPROJECT_CONFIG_OPTS))
+	$(SED) -r -e "/prefix|export PJ_SHARED_LIBRARIES|MACHINE_NAME|OS_NAME|HOST_NAME|CC_NAME|CROSS_COMPILE|LINUX_POLL/d" source/build.mak > build.mak
 
 configure: build.mak
 
@@ -128,7 +128,7 @@
 
 pjproject.symbols: $(ALL_LIB_FILES)
 	$(ECHO_PREFIX) Generating symbols
-	$(CMD_PREFIX) nm -Pog $(ALL_LIB_FILES) | sed -n -r -e "s/.+: ([pP][jJ][^ ]+) .+/\1/gp" | sort -u > pjproject.symbols
+	$(CMD_PREFIX) $(NM) -Pog $(PJ_LIB_FILES) | $(SED) -n -r -e "s/.+: ([pP][jJ][^ ]+) .+/\1/gp" | sort -u > pjproject.symbols
 
 source/pjsip-apps/src/asterisk_malloc_debug.c: patches/asterisk_malloc_debug.c
 	$(ECHO_PREFIX) Copying $< to $@
@@ -154,8 +154,6 @@
 source/pjsip-apps/src/python/_pjsua.so: source/pjsip-apps/src/python/_pjsua.o
 	$(ECHO_PREFIX) Linking python bindings $(@F)
 	$(CMD_PREFIX) gcc -shared -pthread -o $@ $< $(LDFLAGS) $(PJ_LDFLAGS) $(APP_LDLIBS) $(PYTHONDEV_LIB) $(REALLY_QUIET)
-
-_all: $(TARGETS)
 
 _install: _all
 	@if [ ! -d "$(DESTDIR)$(ASTDATADIR)/third-party/pjproject" ]; then \
@@ -188,4 +186,3 @@
 distclean:
 	$(ECHO_PREFIX) Distcleaning
 	-$(CMD_PREFIX) rm -rf source pjproject.symbols pjproject-*.tar.bz2 build.mak .rebuild_needed
-
diff --git a/third-party/pjproject/apply_patches b/third-party/pjproject/apply_patches
index 5dfdd2a..c28f403 100755
--- a/third-party/pjproject/apply_patches
+++ b/third-party/pjproject/apply_patches
@@ -5,6 +5,8 @@
 	shift
 fi
 
+PATCH=${PATCH:-patch}
+
 patchdir=${1:?You must supply a patches directory}
 sourcedir=${2?:You must supply a source directory}
 
@@ -27,12 +29,12 @@
 fi
 
 for patchfile in $patchdir/*.patch ; do
-	patch -d $sourcedir -p1 -s -r- -f -N --dry-run -i "$patchfile" || (echo "Patchfile $(basename $patchfile) failed to apply" >&2 ; exit 1) || exit 1
+	${PATCH} -d $sourcedir -p1 -s -r- -f -N --dry-run -i "$patchfile" || (echo "Patchfile $(basename $patchfile) failed to apply" >&2 ; exit 1) || exit 1
 done
 
 for patchfile in "$patchdir"/*.patch ; do
 	[ -z $quiet ] && echo "Applying patch $(basename $patchfile)"
-	patch -d "$sourcedir" -p1 -s -i "$patchfile" || exit 1
+	${PATCH} -d "$sourcedir" -p1 -s -i "$patchfile" || exit 1
 done
 
 exit 0
diff --git a/third-party/pjproject/configure.m4 b/third-party/pjproject/configure.m4
index 7a079f6..386035b 100644
--- a/third-party/pjproject/configure.m4
+++ b/third-party/pjproject/configure.m4
@@ -1,49 +1,73 @@
-AC_DEFUN([PJPROJECT_SYMBOL_CHECK],
+AC_DEFUN([_PJPROJECT_CONFIGURE],
 [
-	$1_INCLUDE="$PJPROJECT_INCLUDE"
-    AC_MSG_CHECKING([for $2 declared in $3])
+	if test "${ac_mandatory_list#*PJPROJECT*}" != "$ac_mandatory_list" ; then
+		AC_MSG_ERROR(--with-pjproject and --with-pjproject-bundled can't both be specified)
+	fi
 
-	saved_cpp="$CPPFLAGS"
-	CPPFLAGS="$PJPROJECT_INCLUDE"
-	AC_EGREP_HEADER($2, $3, [
-		AC_MSG_RESULT(yes)
-		PBX_$1=1
-		AC_DEFINE([HAVE_$1], 1, [Define if your system has $2 declared.])
-	], [
-		AC_MSG_RESULT(no)
-	])
+	ac_mandatory_list="$ac_mandatory_list PJPROJECT"
+	PJPROJECT_DIR="${ac_top_build_prefix}third-party/pjproject"
 
-	CPPGLAGS="$saved_cpp"
-	$1_INCLUDE="$PJPROJECT_INCLUDE"
+	AC_MSG_CHECKING(for embedded pjproject (may have to download))
+	AC_MSG_RESULT(configuring)
+	
+	if test "x${DOWNLOAD_TO_STDOUT}" = "x" ; then
+		AC_MSG_ERROR(A download utility (wget, curl or fetch) is required to download bundled pjproject)
+	fi
+	if test "${BZIP2}" = ":" ; then
+		AC_MSG_ERROR(bzip2 is required to extract the pjproject tar file)
+	fi
+	if test "${TAR}" = ":" ; then
+		AC_MSG_ERROR(tar is required to extract the pjproject tar file)
+	fi
+	if test "${PATCH}" = ":" ; then
+		AC_MSG_ERROR(patch is required to configure bundled pjproject)
+	fi
+	if test "${SED}" = ":" ; then
+		AC_MSG_ERROR(sed is required to configure bundled pjproject)
+	fi
+	if test "${NM}" = ":" ; then
+		AC_MSG_ERROR(nm is required to build bundled pjproject)
+	fi
+	
+	export TAR PATCH SED NM EXTERNALS_CACHE_DIR DOWNLOAD_TO_STDOUT
+	${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} configure
+	if test $? -ne 0 ; then
+		AC_MSG_RESULT(failed)
+		AC_MSG_NOTICE(Unable to configure ${PJPROJECT_DIR})
+		AC_MSG_ERROR(Run "${GNU_MAKE} -C ${PJPROJECT_DIR} NOISY_BUILD=yes configure" to see error details.)
+	fi
+
+	AC_MSG_CHECKING(for bundled pjproject)
+
+	PJPROJECT_INCLUDE=$(${GNU_MAKE} --quiet --no-print-directory -C ${PJPROJECT_DIR} echo_cflags)
+	PJPROJECT_CFLAGS="$PJPROJECT_INCLUDE"
+	PBX_PJPROJECT=1
+	
+	AC_DEFINE([HAVE_PJPROJECT], 1, [Define if your system has PJPROJECT])
+	AC_DEFINE([HAVE_PJPROJECT_BUNDLED], 1, [Define if your system has PJPROJECT_BUNDLED])
+
+	AC_DEFINE([HAVE_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK], 1, [Define if your system has pjsip_dlg_create_uas_and_inc_lock declared.])
+	AC_DEFINE([HAVE_PJ_TRANSACTION_GRP_LOCK], 1, [Define if your system has pjsip_tsx_create_uac2 declared.])
+	AC_DEFINE([HAVE_PJSIP_REPLACE_MEDIA_STREAM], 1, [Define if your system has PJSIP_REPLACE_MEDIA_STREAM declared])
+	AC_DEFINE([HAVE_PJSIP_GET_DEST_INFO], 1, [Define if your system has pjsip_get_dest_info declared.])
+	AC_DEFINE([HAVE_PJ_SSL_CERT_LOAD_FROM_FILES2], 1, [Define if your system has pj_ssl_cert_load_from_files2 declared.])
+	AC_DEFINE([HAVE_PJSIP_EXTERNAL_RESOLVER], 1, [Define if your system has pjsip_endpt_set_ext_resolver declared.])
+	AC_DEFINE([HAVE_PJSIP_TLS_TRANSPORT_PROTO], 1, [Define if your system has PJSIP_TLS_TRANSPORT_PROTO])
+	AC_DEFINE([HAVE_PJSIP_EVSUB_GRP_LOCK], 1, [Define if your system has PJSIP_EVSUB_GRP_LOCK])
+	AC_DEFINE([HAVE_PJSIP_INV_SESSION_REF], 1, [Define if your system has PJSIP_INV_SESSION_REF])
+
+	AC_SUBST([PJPROJECT_BUNDLED])
+	AC_SUBST([PJPROJECT_DIR])
+	AC_SUBST([PBX_PJPROJECT])
+	AC_SUBST([PJPROJECT_LIB])
+	AC_SUBST([PJPROJECT_INCLUDE])
+	AC_MSG_RESULT(yes)
 ])
 
 AC_DEFUN([PJPROJECT_CONFIGURE],
 [
-	AC_MSG_CHECKING(for embedded pjproject (may have to download))
-	AC_MSG_RESULT(configuring)
-	${GNU_MAKE} --quiet --no-print-directory -C $1 configure
-	if test $? -ne 0 ; then
-		AC_MSG_RESULT(failed)
-		AC_MSG_NOTICE(Unable to configure $1)
-		AC_MSG_ERROR(Run "${GNU_MAKE} -C $1 NOISY_BUILD=yes configure" to see error details.)
+	if test "$PJPROJECT_BUNDLED" = "yes" ; then
+		_PJPROJECT_CONFIGURE()
 	fi
-
-	PJPROJECT_INCLUDE=$(${GNU_MAKE} --quiet --no-print-directory -C $1 echo_cflags)
-	PJPROJECT_CFLAGS="$PJPROJECT_INCLUDE"
-	PBX_PJPROJECT=1
-	PJPROJECT_BUNDLED=yes
-	AC_DEFINE([HAVE_PJPROJECT], 1, [Define if your system has PJPROJECT])
-	AC_DEFINE([HAVE_PJPROJECT_BUNDLED], 1, [Define if your system has PJPROJECT_BUNDLED])
-	AC_MSG_CHECKING(for embedded pjproject)
-	AC_MSG_RESULT(yes)
-
-	PJPROJECT_SYMBOL_CHECK([PJSIP_DLG_CREATE_UAS_AND_INC_LOCK], [pjsip_dlg_create_uas_and_inc_lock], [pjsip.h])
-	PJPROJECT_SYMBOL_CHECK([PJ_TRANSACTION_GRP_LOCK], [pjsip_tsx_create_uac2], [pjsip.h])
-	PJPROJECT_SYMBOL_CHECK([PJSIP_REPLACE_MEDIA_STREAM], [PJMEDIA_SDP_NEG_ALLOW_MEDIA_CHANGE], [pjmedia.h])
-	PJPROJECT_SYMBOL_CHECK([PJSIP_GET_DEST_INFO], [pjsip_get_dest_info], [pjsip.h])
-	PJPROJECT_SYMBOL_CHECK([PJ_SSL_CERT_LOAD_FROM_FILES2], [pj_ssl_cert_load_from_files2], [pjlib.h])
-	PJPROJECT_SYMBOL_CHECK([PJSIP_EXTERNAL_RESOLVER], [pjsip_endpt_set_ext_resolver], [pjsip.h])
-	AC_DEFINE([HAVE_PJSIP_TLS_TRANSPORT_PROTO], 1, [Define if your system has PJSIP_TLS_TRANSPORT_PROTO])
-	AC_DEFINE([HAVE_PJSIP_EVSUB_GRP_LOCK], 1, [Define if your system has PJSIP_EVSUB_GRP_LOCK])
-	AC_DEFINE([HAVE_PJSIP_INV_SESSION_REF], 1, [Define if your system has PJSIP_INV_SESSION_REF])
 ])
+	
\ No newline at end of file

-- 
To view, visit https://gerrit.asterisk.org/4014
To unsubscribe, visit https://gerrit.asterisk.org/settings

Gerrit-MessageType: merged
Gerrit-Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b
Gerrit-PatchSet: 3
Gerrit-Project: asterisk
Gerrit-Branch: 13
Gerrit-Owner: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Anonymous Coward #1000019
Gerrit-Reviewer: Corey Farrell <git at cfware.com>
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Matthew Fredrickson <creslin at digium.com>



More information about the asterisk-commits mailing list