[asterisk-commits] pjproject bundled: Check for python-dev and TEST FRAMEWORK (asterisk[master])
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Mon May 9 18:49:42 CDT 2016
Joshua Colp has submitted this change and it was merged.
Change subject: pjproject_bundled: Check for python-dev and TEST_FRAMEWORK
......................................................................
pjproject_bundled: Check for python-dev and TEST_FRAMEWORK
The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set.
The python bindings are now built only if TEST_FRAMEWORK is set and a
python development package is installed.
libresample was also disabled.
ASTERISK-25993 #close
Reported-by: Joshua Colp
Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03
---
M configure
M configure.ac
M include/asterisk/autoconfig.h.in
M makeopts.in
M third-party/pjproject/Makefile
M third-party/pjproject/Makefile.rules
6 files changed, 127 insertions(+), 6 deletions(-)
Approvals:
Mark Michelson: Looks good to me, approved
Joshua Colp: Looks good to me, but someone else must approve; Verified
diff --git a/configure b/configure
index 171693a..751fbea 100755
--- a/configure
+++ b/configure
@@ -663,6 +663,10 @@
PWLIB_INCDIR
PWLIBDIR
PTLIB_CONFIG
+PYTHONDEV_LIBS
+PYTHONDEV_CFLAGS
+PYTHONDEV_INCLUDE
+PYTHONDEV_LIB
PJPROJECT_LIBS
PJPROJECT_CFLAGS
PG_CONFIG
@@ -1425,6 +1429,8 @@
LIBEDIT_LIBS
PJPROJECT_CFLAGS
PJPROJECT_LIBS
+PYTHONDEV_CFLAGS
+PYTHONDEV_LIBS
GMIME_CFLAGS
GMIME_LIBS
GTK2_CFLAGS
@@ -2168,6 +2174,10 @@
C compiler flags for PJPROJECT, overriding pkg-config
PJPROJECT_LIBS
linker flags for PJPROJECT, overriding pkg-config
+ PYTHONDEV_CFLAGS
+ C compiler flags for PYTHONDEV, overriding pkg-config
+ PYTHONDEV_LIBS
+ linker flags for PYTHONDEV, overriding pkg-config
GMIME_CFLAGS
C compiler flags for GMIME, overriding pkg-config
GMIME_LIBS linker flags for GMIME, overriding pkg-config
@@ -25444,6 +25454,97 @@
fi
+
+
+ if test "x${PBX_PYTHONDEV}" != "x1" -a "${USE_PYTHONDEV}" != "no"; then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PYTHONDEV" >&5
+$as_echo_n "checking for PYTHONDEV... " >&6; }
+
+if test -n "$PYTHONDEV_CFLAGS"; then
+ pkg_cv_PYTHONDEV_CFLAGS="$PYTHONDEV_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"python\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "python") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_PYTHONDEV_CFLAGS=`$PKG_CONFIG --cflags "python" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$PYTHONDEV_LIBS"; then
+ pkg_cv_PYTHONDEV_LIBS="$PYTHONDEV_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"python\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "python") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_PYTHONDEV_LIBS=`$PKG_CONFIG --libs "python" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ PYTHONDEV_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "python" 2>&1`
+ else
+ PYTHONDEV_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "python" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$PYTHONDEV_PKG_ERRORS" >&5
+
+
+ PBX_PYTHONDEV=0
+
+
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+ PBX_PYTHONDEV=0
+
+
+else
+ PYTHONDEV_CFLAGS=$pkg_cv_PYTHONDEV_CFLAGS
+ PYTHONDEV_LIBS=$pkg_cv_PYTHONDEV_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+ PBX_PYTHONDEV=1
+ PYTHONDEV_INCLUDE="$PYTHONDEV_CFLAGS"
+ PYTHONDEV_LIB="$PYTHONDEV_LIBS"
+
+$as_echo "#define HAVE_PYTHONDEV 1" >>confdefs.h
+
+
+fi
+ fi
+
+
+
if test "x${PBX_POPT}" != "x1" -a "${USE_POPT}" != "no"; then
pbxlibdir=""
# if --with-POPT=DIR has been specified, use it.
diff --git a/configure.ac b/configure.ac
index b136d86..9c11054 100644
--- a/configure.ac
+++ b/configure.ac
@@ -2207,6 +2207,10 @@
fi
fi
+AC_SUBST([PYTHONDEV_LIB])
+AC_SUBST([PYTHONDEV_INCLUDE])
+AST_PKG_CONFIG_CHECK([PYTHONDEV], [python])
+
AST_EXT_LIB_CHECK([POPT], [popt], [poptStrerror], [popt.h])
AST_EXT_LIB_CHECK([PORTAUDIO], [portaudio], [Pa_GetDeviceCount], [portaudio.h])
diff --git a/include/asterisk/autoconfig.h.in b/include/asterisk/autoconfig.h.in
index b5fe655..7224212 100644
--- a/include/asterisk/autoconfig.h.in
+++ b/include/asterisk/autoconfig.h.in
@@ -730,6 +730,9 @@
/* Define if your system has the PWLib libraries. */
#undef HAVE_PWLIB
+/* Define if your system has the PYTHONDEV libraries. */
+#undef HAVE_PYTHONDEV
+
/* Define to 1 if you have the Radius Client library. */
#undef HAVE_RADIUS
diff --git a/makeopts.in b/makeopts.in
index 6baef1b..d4347da 100644
--- a/makeopts.in
+++ b/makeopts.in
@@ -243,6 +243,9 @@
PRI_INCLUDE=@PRI_INCLUDE@
PRI_LIB=@PRI_LIB@
+PYTHONDEV_INCLUDE=@PYTHONDEV_INCLUDE@
+PYTHONDEV_LIB=@PYTHONDEV_LIB@
+
RESAMPLE_INCLUDE=@RESAMPLE_INCLUDE@
RESAMPLE_LIB=@RESAMPLE_LIB@
diff --git a/third-party/pjproject/Makefile b/third-party/pjproject/Makefile
index 7fa3902..7349db6 100644
--- a/third-party/pjproject/Makefile
+++ b/third-party/pjproject/Makefile
@@ -45,6 +45,13 @@
CF := $(filter-out -I%,$(CF))
export CFLAGS += $(CF)
export LDFLAGS += $(CC_LDFLAGS)
+ TARGETS := pjproject.symbols
+ ifeq ($(findstring TEST_FRAMEWORK,$(MENUSELECT_CFLAGS)),TEST_FRAMEWORK)
+ TARGETS += source/pjsip-apps/bin/pjsua-$(TARGET_NAME)
+ ifneq ($(PYTHONDEV_LIB),)
+ TARGETS += source/pjsip-apps/src/python/build/_pjsua.so
+ endif
+ endif
else
all install:
endif
@@ -95,11 +102,9 @@
$(ECHO_PREFIX) "Making dependencies"
+$(CMD_PREFIX) $(SUBMAKE) -C source dep
-
menuselect: ../../menuselect.makeopts ../../makeopts
-$(CMD_PREFIX) test -d source && ($(SUBMAKE) -C source clean ; find source -name *.a -delete ; rm -rf source/pjsip-apps/src/python/build) || :
-$(CMD_PREFIX) rm -rf pjproject.symbols
-
source/pjlib/lib/libpj-$(TARGET_NAME).a: menuselect source/pjlib/build/.pjlib-$(TARGET_NAME).depend
$(ECHO_PREFIX) Compiling libs
@@ -117,17 +122,22 @@
$(ECHO_PREFIX) Compiling python bindings
$(CMD_PREFIX) (cd source/pjsip-apps/src/python ; MAKE=$(MAKE) python setup.py build --build-platlib=./build $(REALLY_QUIET))
-_all: pjproject.symbols source/pjsip-apps/bin/pjsua-$(TARGET_NAME) source/pjsip-apps/src/python/build/_pjsua.so
+_all: $(TARGETS)
_install: _all
- $(ECHO_PREFIX) Installing apps and python bindings
@if [ ! -d "$(DESTDIR)$(ASTDATADIR)/third-party/pjproject" ]; then \
$(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/third-party/pjproject"; \
fi;
+ifneq ($(findstring source/pjsip-apps/bin/pjsua-$(TARGET_NAME),$(TARGETS)),)
+ $(ECHO_PREFIX) Installing apps
$(CMD_PREFIX) $(INSTALL) -m 755 source/pjsip-apps/bin/pjsua-$(TARGET_NAME) "$(DESTDIR)$(ASTDATADIR)/third-party/pjproject/pjsua"
$(CMD_PREFIX) $(INSTALL) -m 755 source/pjsip-apps/bin/pjsystest-$(TARGET_NAME) "$(DESTDIR)$(ASTDATADIR)/third-party/pjproject/pjsystest"
+endif
+ifneq ($(findstring source/pjsip-apps/src/python/build/_pjsua.so,$(TARGETS)),)
+ $(ECHO_PREFIX) Installing python bindings
$(CMD_PREFIX) $(INSTALL) -m 755 source/pjsip-apps/src/python/build/_pjsua.so "$(DESTDIR)$(ASTDATADIR)/third-party/pjproject/"
$(CMD_PREFIX) $(INSTALL) -m 644 source/pjsip-apps/src/python/build/pjsua.py "$(DESTDIR)$(ASTDATADIR)/third-party/pjproject/"
+endif
uninstall:
$(ECHO_PREFIX) Uninstalling apps and python bindings
@@ -135,7 +145,7 @@
clean:
$(ECHO_PREFIX) Cleaning
- -$(CMD_PREFIX) test -d source && ($(SUBMAKE) -C source clean ; find source -name *.a -delete ; rm -rf source/pjsip-apps/src/python/build) || :
+ -$(CMD_PREFIX) test -d source && ($(SUBMAKE) -C source clean ; find source -name *.a -delete ; rm -rf source/pjsip-apps/src/python/build ; rm -rf source/pjsip-apps/bin/* ) || :
-$(CMD_PREFIX) rm -rf pjproject.symbols
distclean:
diff --git a/third-party/pjproject/Makefile.rules b/third-party/pjproject/Makefile.rules
index 6b51c2f..d2e7d25 100644
--- a/third-party/pjproject/Makefile.rules
+++ b/third-party/pjproject/Makefile.rules
@@ -3,7 +3,7 @@
# Even though we're not installing pjproject, we're setting prefix to /opt/pjproject to be safe
PJPROJECT_CONFIG_OPTS = --prefix=/opt/pjproject --disable-speex-codec --disable-speex-aec \
--disable-gsm-codec --disable-video --disable-v4l2 --disable-sound --disable-opencore-amr \
- --disable-ilbc-codec --without-libyuv --disable-g7221-codec
+ --disable-ilbc-codec --without-libyuv --disable-g7221-codec --disable-resample
ifeq ($(shell uname -s),Linux)
PJPROJECT_CONFIG_OPTS += --enable-epoll
--
To view, visit https://gerrit.asterisk.org/2787
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: merged
Gerrit-Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03
Gerrit-PatchSet: 1
Gerrit-Project: asterisk
Gerrit-Branch: master
Gerrit-Owner: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Anonymous Coward #1000019
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Mark Michelson <mmichelson at digium.com>
More information about the asterisk-commits
mailing list