[asterisk-commits] Create Asterisk-14: Update CHANGES and UPGRADE files (asterisk[master])
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Fri Jul 22 07:48:39 CDT 2016
Anonymous Coward #1000019 has submitted this change and it was merged.
Change subject: Create Asterisk-14: Update CHANGES and UPGRADE files
......................................................................
Create Asterisk-14: Update CHANGES and UPGRADE files
Change-Id: I35b5f6657670cfa8985796fa1e1fe86ad299efdc
---
M CHANGES
A UPGRADE-14.txt
M UPGRADE.txt
3 files changed, 96 insertions(+), 68 deletions(-)
Approvals:
Richard Mudgett: Looks good to me, but someone else must approve
Anonymous Coward #1000019: Verified
Joshua Colp: Looks good to me, approved
diff --git a/CHANGES b/CHANGES
index 9caa524..c9af0c2 100644
--- a/CHANGES
+++ b/CHANGES
@@ -9,6 +9,10 @@
==============================================================================
------------------------------------------------------------------------------
+--- Functionality changes from Asterisk 14 to Asterisk 15 --------------------
+------------------------------------------------------------------------------
+
+------------------------------------------------------------------------------
--- Functionality changes from Asterisk 13 to Asterisk 14 --------------------
------------------------------------------------------------------------------
diff --git a/UPGRADE-14.txt b/UPGRADE-14.txt
new file mode 100644
index 0000000..f8fa790
--- /dev/null
+++ b/UPGRADE-14.txt
@@ -0,0 +1,91 @@
+===========================================================
+===
+=== Information for upgrading between Asterisk versions
+===
+=== These files document all the changes that MUST be taken
+=== into account when upgrading between the Asterisk
+=== versions listed below. These changes may require that
+=== you modify your configuration files, dialplan or (in
+=== some cases) source code if you have your own Asterisk
+=== modules or patches. These files also include advance
+=== notice of any functionality that has been marked as
+=== 'deprecated' and may be removed in a future release,
+=== along with the suggested replacement functionality.
+===
+=== UPGRADE-1.2.txt -- Upgrade info for 1.0 to 1.2
+=== UPGRADE-1.4.txt -- Upgrade info for 1.2 to 1.4
+=== UPGRADE-1.6.txt -- Upgrade info for 1.4 to 1.6
+=== UPGRADE-1.8.txt -- Upgrade info for 1.6 to 1.8
+=== UPGRADE-10.txt -- Upgrade info for 1.8 to 10
+=== UPGRADE-11.txt -- Upgrade info for 10 to 11
+=== UPGRADE-12.txt -- Upgrade info for 11 to 12
+=== UPGRADE-13.txt -- Upgrade info for 12 to 13
+===========================================================
+
+ARI:
+ - The policy for when to send "Dial" events has changed. Previously, "Dial"
+ events were sent on the calling channel's topic. However, starting in Asterisk
+ 14, if there is no calling channel on which to send the event, the event is
+ instead sent on the called channel's topic. Note that for the ARI channels
+ resource's dial operation, this means that the "Dial" events will always be
+ sent on the called channel's topic.
+
+Channel Drivers:
+
+chan_dahdi:
+ - For users using the FXO port (FXS signaling) distinctive ring detection
+ feature, you will need to adjust the dringX count values. The count
+ values now only record ring end events instead of any DAHDI event. A
+ ring-ring-ring pattern would exceed the pattern limits and stop
+ Caller-ID detection.
+
+chan_sip:
+ - The SIP dial string has been extended past the [!dnid] option by another
+ exclamation mark: [!dnid[!fromuri]. An exclamation mark in the To-URI
+ will now mean changes to the From-URI.
+
+Core:
+ - The REF_DEBUG compiler flag is now used to enable refdebug by default.
+ The setting can be overridden in asterisk.conf by setting refdebug in
+ the options category. No recompile is required to enable/disable it.
+
+ - Modified processing of command-line options to first parse only what
+ is necessary to read asterisk.conf. Once asterisk.conf is fully loaded,
+ the remaining options are processed. The -X option now applies to
+ asterisk.conf only. To enable #exec for other config files you must
+ set execincludes=yes in asterisk.conf. Any other option set on the
+ command-line will now override the equivalent setting from asterisk.conf.
+
+AMI:
+ - The 'ModuleCheck' Action's Version key will no longer show the module
+ version. The value will always be blank.
+
+CLI:
+ - The 'core show file version' command has been removed. When Asterisk
+ moved to Git, the source control version support was removed. As a
+ result, the CLi command was no longer useful and was removed as well.
+
+Logging:
+ - The first callid created is now 1 instead of 0. The value 0
+ is now reserved to represent a lack of callid.
+
+AMI:
+ - The Command action now sends the output from the CLI command as a series
+ of Output headers for each line instead of as a block of text with the
+ --END COMMAND-- delimiter to match the output from other actions.
+
+ Commands that fail to execute (no such command, invalid syntax etc.) now
+ return an Error response instead of Success.
+
+app_amd:
+ - The 'maximum_number_of_words' configuration option and parameter to the AMD
+ application previously did not match the documented functionality + variable
+ name. In Asterisk 13, a value of '3' would mean that if '3' words were detected,
+ the result would be detection as a 'MACHINE'. As of this version, the value
+ reflects the maximum words that if EXCEEDED (rather than reached), would
+ result in detection as a machine. This means that you should update this
+ value to be one higher than your previos value, if your previous value
+ was working well for you.
+
+===========================================================
+===========================================================
diff --git a/UPGRADE.txt b/UPGRADE.txt
index f8fa790..ad03edf 100644
--- a/UPGRADE.txt
+++ b/UPGRADE.txt
@@ -20,72 +20,5 @@
=== UPGRADE-11.txt -- Upgrade info for 10 to 11
=== UPGRADE-12.txt -- Upgrade info for 11 to 12
=== UPGRADE-13.txt -- Upgrade info for 12 to 13
-===========================================================
-
-ARI:
- - The policy for when to send "Dial" events has changed. Previously, "Dial"
- events were sent on the calling channel's topic. However, starting in Asterisk
- 14, if there is no calling channel on which to send the event, the event is
- instead sent on the called channel's topic. Note that for the ARI channels
- resource's dial operation, this means that the "Dial" events will always be
- sent on the called channel's topic.
-
-Channel Drivers:
-
-chan_dahdi:
- - For users using the FXO port (FXS signaling) distinctive ring detection
- feature, you will need to adjust the dringX count values. The count
- values now only record ring end events instead of any DAHDI event. A
- ring-ring-ring pattern would exceed the pattern limits and stop
- Caller-ID detection.
-
-chan_sip:
- - The SIP dial string has been extended past the [!dnid] option by another
- exclamation mark: [!dnid[!fromuri]. An exclamation mark in the To-URI
- will now mean changes to the From-URI.
-
-Core:
- - The REF_DEBUG compiler flag is now used to enable refdebug by default.
- The setting can be overridden in asterisk.conf by setting refdebug in
- the options category. No recompile is required to enable/disable it.
-
- - Modified processing of command-line options to first parse only what
- is necessary to read asterisk.conf. Once asterisk.conf is fully loaded,
- the remaining options are processed. The -X option now applies to
- asterisk.conf only. To enable #exec for other config files you must
- set execincludes=yes in asterisk.conf. Any other option set on the
- command-line will now override the equivalent setting from asterisk.conf.
-
-AMI:
- - The 'ModuleCheck' Action's Version key will no longer show the module
- version. The value will always be blank.
-
-CLI:
- - The 'core show file version' command has been removed. When Asterisk
- moved to Git, the source control version support was removed. As a
- result, the CLi command was no longer useful and was removed as well.
-
-Logging:
- - The first callid created is now 1 instead of 0. The value 0
- is now reserved to represent a lack of callid.
-
-AMI:
- - The Command action now sends the output from the CLI command as a series
- of Output headers for each line instead of as a block of text with the
- --END COMMAND-- delimiter to match the output from other actions.
-
- Commands that fail to execute (no such command, invalid syntax etc.) now
- return an Error response instead of Success.
-
-app_amd:
- - The 'maximum_number_of_words' configuration option and parameter to the AMD
- application previously did not match the documented functionality + variable
- name. In Asterisk 13, a value of '3' would mean that if '3' words were detected,
- the result would be detection as a 'MACHINE'. As of this version, the value
- reflects the maximum words that if EXCEEDED (rather than reached), would
- result in detection as a machine. This means that you should update this
- value to be one higher than your previos value, if your previous value
- was working well for you.
-
-===========================================================
+=== UPGRADE-14.txt -- Upgrade info for 13 to 14
===========================================================
--
To view, visit https://gerrit.asterisk.org/3291
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: merged
Gerrit-Change-Id: I35b5f6657670cfa8985796fa1e1fe86ad299efdc
Gerrit-PatchSet: 2
Gerrit-Project: asterisk
Gerrit-Branch: master
Gerrit-Owner: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Anonymous Coward #1000019
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: Richard Mudgett <rmudgett at digium.com>
More information about the asterisk-commits
mailing list