[asterisk-commits] BuildSystem: Avoid obsolete warning with pthread.m4 on autoc... (asterisk[11])
SVN commits to the Asterisk project
asterisk-commits at lists.digium.com
Thu Jul 14 10:48:56 CDT 2016
Anonymous Coward #1000019 has submitted this change and it was merged.
Change subject: BuildSystem: Avoid obsolete warning with pthread.m4 on autoconf.
......................................................................
BuildSystem: Avoid obsolete warning with pthread.m4 on autoconf.
Updated the macro-set autoconf/ax_pthread.m4 to its latest upstream version.
ASTERISK-26046 #close
Change-Id: I11abc11d17acd2b6a8a5a5be8ae8e0949dab9cc7
---
D autoconf/acx_pthread.m4
A autoconf/ax_pthread.m4
M configure
M configure.ac
M include/asterisk/autoconfig.h.in
5 files changed, 965 insertions(+), 356 deletions(-)
Approvals:
George Joseph: Looks good to me, but someone else must approve
Anonymous Coward #1000019: Verified
Joshua Colp: Looks good to me, approved
diff --git a/autoconf/acx_pthread.m4 b/autoconf/acx_pthread.m4
deleted file mode 100644
index b7ee73d..0000000
--- a/autoconf/acx_pthread.m4
+++ /dev/null
@@ -1,243 +0,0 @@
-dnl @synopsis ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
-dnl
-dnl @summary figure out how to build C programs using POSIX threads
-dnl
-dnl This macro figures out how to build C programs using POSIX threads.
-dnl It sets the PTHREAD_LIBS output variable to the threads library and
-dnl linker flags, and the PTHREAD_CFLAGS output variable to any special
-dnl C compiler flags that are needed. (The user can also force certain
-dnl compiler flags/libs to be tested by setting these environment
-dnl variables.)
-dnl
-dnl Also sets PTHREAD_CC to any special C compiler that is needed for
-dnl multi-threaded programs (defaults to the value of CC otherwise).
-dnl (This is necessary on AIX to use the special cc_r compiler alias.)
-dnl
-dnl NOTE: You are assumed to not only compile your program with these
-dnl flags, but also link it with them as well. e.g. you should link
-dnl with $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS
-dnl $LIBS
-dnl
-dnl If you are only building threads programs, you may wish to use
-dnl these variables in your default LIBS, CFLAGS, and CC:
-dnl
-dnl LIBS="$PTHREAD_LIBS $LIBS"
-dnl CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-dnl CC="$PTHREAD_CC"
-dnl
-dnl In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute
-dnl constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to
-dnl that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
-dnl
-dnl ACTION-IF-FOUND is a list of shell commands to run if a threads
-dnl library is found, and ACTION-IF-NOT-FOUND is a list of commands to
-dnl run it if it is not found. If ACTION-IF-FOUND is not specified, the
-dnl default action will define HAVE_PTHREAD.
-dnl
-dnl Please let the authors know if this macro fails on any platform, or
-dnl if you have any other suggestions or comments. This macro was based
-dnl on work by SGJ on autoconf scripts for FFTW (www.fftw.org) (with
-dnl help from M. Frigo), as well as ac_pthread and hb_pthread macros
-dnl posted by Alejandro Forero Cuervo to the autoconf macro repository.
-dnl We are also grateful for the helpful feedback of numerous users.
-dnl
-dnl @category InstalledPackages
-dnl @author Steven G. Johnson <stevenj at alum.mit.edu>
-dnl @version 2006-05-29
-dnl @license GPLWithACException
-
-AC_DEFUN([ACX_PTHREAD],
-[
-AC_REQUIRE([AC_CANONICAL_HOST])
-AC_LANG_SAVE
-AC_LANG_C
-acx_pthread_ok=no
-
-# We used to check for pthread.h first, but this fails if pthread.h
-# requires special compiler flags (e.g. on True64 or Sequent).
-# It gets checked for in the link test anyway.
-
-# First of all, check if the user has set any of the PTHREAD_LIBS,
-# etcetera environment variables, and if threads linking works using
-# them:
-if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
- save_LIBS="$LIBS"
- LIBS="$PTHREAD_LIBS $LIBS"
- AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
- AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes)
- AC_MSG_RESULT($acx_pthread_ok)
- if test x"$acx_pthread_ok" = xno; then
- PTHREAD_LIBS=""
- PTHREAD_CFLAGS=""
- fi
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
-fi
-
-# We must check for the threads library under a number of different
-# names; the ordering is very important because some systems
-# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
-# libraries is broken (non-POSIX).
-
-# Create a list of thread flags to try. Items starting with a "-" are
-# C compiler flags, and other items are library names, except for "none"
-# which indicates that we try without any flags at all, and "pthread-config"
-# which is a program returning the flags for the Pth emulation library.
-
-acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
-
-# The ordering *is* (sometimes) important. Some notes on the
-# individual items follow:
-
-# pthreads: AIX (must check this before -lpthread)
-# none: in case threads are in libc; should be tried before -Kthread and
-# other compiler flags to prevent continual compiler warnings
-# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
-# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
-# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
-# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
-# -pthreads: Solaris/gcc
-# -mthreads: Mingw32/gcc, Lynx/gcc
-# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
-# doesn't hurt to check since this sometimes defines pthreads too;
-# also defines -D_REENTRANT)
-# ... -mt is also the pthreads flag for HP/aCC
-# pthread: Linux, etcetera
-# --thread-safe: KAI C++
-# pthread-config: use pthread-config program (for GNU Pth library)
-
-case "${host_cpu}-${host_os}" in
- *solaris*)
-
- # On Solaris (at least, for some versions), libc contains stubbed
- # (non-functional) versions of the pthreads routines, so link-based
- # tests will erroneously succeed. (We need to link with -pthreads/-mt/
- # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
- # a function called by this macro, so we could check for that, but
- # who knows whether they'll stub that too in a future libc.) So,
- # we'll just look for -pthreads and -lpthread first:
-
- acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
- ;;
-esac
-
-if test x"$acx_pthread_ok" = xno; then
-for flag in $acx_pthread_flags; do
-
- case $flag in
- none)
- AC_MSG_CHECKING([whether pthreads work without any flags])
- ;;
-
- -*)
- AC_MSG_CHECKING([whether pthreads work with $flag])
- PTHREAD_CFLAGS="$flag"
- ;;
-
- pthread-config)
- AC_CHECK_PROG(acx_pthread_config, pthread-config, yes, no)
- if test x"$acx_pthread_config" = xno; then continue; fi
- PTHREAD_CFLAGS="`pthread-config --cflags`"
- PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
- ;;
-
- *)
- AC_MSG_CHECKING([for the pthreads library -l$flag])
- PTHREAD_LIBS="-l$flag"
- ;;
- esac
-
- save_LIBS="$LIBS"
- save_CFLAGS="$CFLAGS"
- LIBS="$PTHREAD_LIBS $LIBS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-
- # Check for various functions. We must include pthread.h,
- # since some functions may be macros. (On the Sequent, we
- # need a special flag -Kthread to make this header compile.)
- # We check for pthread_join because it is in -lpthread on IRIX
- # while pthread_create is in libc. We check for pthread_attr_init
- # due to DEC craziness with -lpthreads. We check for
- # pthread_cleanup_push because it is one of the few pthread
- # functions on Solaris that doesn't have a non-functional libc stub.
- # We try pthread_create on general principles.
- AC_TRY_LINK([#include <pthread.h>],
- [pthread_t th; pthread_join(th, 0);
- pthread_attr_init(0); pthread_cleanup_push(0, 0);
- pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
- [acx_pthread_ok=yes])
-
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
-
- AC_MSG_RESULT($acx_pthread_ok)
- if test "x$acx_pthread_ok" = xyes; then
- break;
- fi
-
- PTHREAD_LIBS=""
- PTHREAD_CFLAGS=""
-done
-fi
-
-# Various other checks:
-if test "x$acx_pthread_ok" = xyes; then
- save_LIBS="$LIBS"
- LIBS="$PTHREAD_LIBS $LIBS"
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-
- # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
- AC_MSG_CHECKING([for joinable pthread attribute])
- attr_name=unknown
- for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
- AC_TRY_LINK([#include <pthread.h>], [int attr=$attr; return attr;],
- [attr_name=$attr; break])
- done
- AC_MSG_RESULT($attr_name)
- if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
- AC_DEFINE_UNQUOTED(PTHREAD_CREATE_JOINABLE, $attr_name,
- [Define to necessary symbol if this constant
- uses a non-standard name on your system.])
- fi
-
- AC_MSG_CHECKING([if more special flags are required for pthreads])
- flag=no
- case "${host_cpu}-${host_os}" in
- *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
- *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
- esac
- AC_MSG_RESULT(${flag})
- if test "x$flag" != xno; then
- PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
- fi
-
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
-
- # More AIX lossage: must compile with xlc_r or cc_r
- if test x"$GCC" != xyes; then
- AC_CHECK_PROGS(PTHREAD_CC, xlc_r cc_r, ${CC})
- else
- PTHREAD_CC=$CC
- fi
-else
- PTHREAD_CC="$CC"
-fi
-
-AC_SUBST(PTHREAD_LIBS)
-AC_SUBST(PTHREAD_CFLAGS)
-AC_SUBST(PTHREAD_CC)
-
-# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
-if test x"$acx_pthread_ok" = xyes; then
- ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1])
- :
-else
- acx_pthread_ok=no
- $2
-fi
-AC_LANG_RESTORE
-])dnl ACX_PTHREAD
diff --git a/autoconf/ax_pthread.m4 b/autoconf/ax_pthread.m4
new file mode 100644
index 0000000..4c4051e
--- /dev/null
+++ b/autoconf/ax_pthread.m4
@@ -0,0 +1,485 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_pthread.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+#
+# DESCRIPTION
+#
+# This macro figures out how to build C programs using POSIX threads. It
+# sets the PTHREAD_LIBS output variable to the threads library and linker
+# flags, and the PTHREAD_CFLAGS output variable to any special C compiler
+# flags that are needed. (The user can also force certain compiler
+# flags/libs to be tested by setting these environment variables.)
+#
+# Also sets PTHREAD_CC to any special C compiler that is needed for
+# multi-threaded programs (defaults to the value of CC otherwise). (This
+# is necessary on AIX to use the special cc_r compiler alias.)
+#
+# NOTE: You are assumed to not only compile your program with these flags,
+# but also to link with them as well. For example, you might link with
+# $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
+#
+# If you are only building threaded programs, you may wish to use these
+# variables in your default LIBS, CFLAGS, and CC:
+#
+# LIBS="$PTHREAD_LIBS $LIBS"
+# CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+# CC="$PTHREAD_CC"
+#
+# In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
+# has a nonstandard name, this macro defines PTHREAD_CREATE_JOINABLE to
+# that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+#
+# Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the
+# PTHREAD_PRIO_INHERIT symbol is defined when compiling with
+# PTHREAD_CFLAGS.
+#
+# ACTION-IF-FOUND is a list of shell commands to run if a threads library
+# is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it
+# is not found. If ACTION-IF-FOUND is not specified, the default action
+# will define HAVE_PTHREAD.
+#
+# Please let the authors know if this macro fails on any platform, or if
+# you have any other suggestions or comments. This macro was based on work
+# by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help
+# from M. Frigo), as well as ac_pthread and hb_pthread macros posted by
+# Alejandro Forero Cuervo to the autoconf macro repository. We are also
+# grateful for the helpful feedback of numerous users.
+#
+# Updated for Autoconf 2.68 by Daniel Richard G.
+#
+# LICENSE
+#
+# Copyright (c) 2008 Steven G. Johnson <stevenj at alum.mit.edu>
+# Copyright (c) 2011 Daniel Richard G. <skunk at iSKUNK.ORG>
+#
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 23
+
+AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
+AC_DEFUN([AX_PTHREAD], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_SED])
+AC_LANG_PUSH([C])
+ax_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on Tru64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
+ ax_pthread_save_CC="$CC"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ AS_IF([test "x$PTHREAD_CC" != "x"], [CC="$PTHREAD_CC"])
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ AC_MSG_CHECKING([for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS])
+ AC_LINK_IFELSE([AC_LANG_CALL([], [pthread_join])], [ax_pthread_ok=yes])
+ AC_MSG_RESULT([$ax_pthread_ok])
+ if test "x$ax_pthread_ok" = "xno"; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ CC="$ax_pthread_save_CC"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
+# (Note: HP C rejects this with "bad form for `-t' option")
+# -pthreads: Solaris/gcc (Note: HP C also rejects)
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads and
+# -D_REENTRANT too), HP C (must be checked before -lpthread, which
+# is present but should not be used directly; and before -mthreads,
+# because the compiler interprets this as "-mt" + "-hreads")
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case $host_os in
+
+ freebsd*)
+
+ # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+ # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+
+ ax_pthread_flags="-kthread lthread $ax_pthread_flags"
+ ;;
+
+ hpux*)
+
+ # From the cc(1) man page: "[-mt] Sets various -D flags to enable
+ # multi-threading and also sets -lpthread."
+
+ ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
+ ;;
+
+ openedition*)
+
+ # IBM z/OS requires a feature-test macro to be defined in order to
+ # enable POSIX threads at all, so give the user a hint if this is
+ # not set. (We don't define these ourselves, as they can affect
+ # other portions of the system API in unpredictable ways.)
+
+ AC_EGREP_CPP([AX_PTHREAD_ZOS_MISSING],
+ [
+# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
+ AX_PTHREAD_ZOS_MISSING
+# endif
+ ],
+ [AC_MSG_WARN([IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support.])])
+ ;;
+
+ solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (N.B.: The stubs are missing
+ # pthread_cleanup_push, or rather a function called by this macro,
+ # so we could check for that, but who knows whether they'll stub
+ # that too in a future libc.) So we'll check first for the
+ # standard Solaris way of linking pthreads (-mt -lpthread).
+
+ ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags"
+ ;;
+esac
+
+# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
+
+AS_IF([test "x$GCC" = "xyes"],
+ [ax_pthread_flags="-pthread -pthreads $ax_pthread_flags"])
+
+# The presence of a feature test macro requesting re-entrant function
+# definitions is, on some systems, a strong hint that pthreads support is
+# correctly enabled
+
+case $host_os in
+ darwin* | hpux* | linux* | osf* | solaris*)
+ ax_pthread_check_macro="_REENTRANT"
+ ;;
+
+ aix*)
+ ax_pthread_check_macro="_THREAD_SAFE"
+ ;;
+
+ *)
+ ax_pthread_check_macro="--"
+ ;;
+esac
+AS_IF([test "x$ax_pthread_check_macro" = "x--"],
+ [ax_pthread_check_cond=0],
+ [ax_pthread_check_cond="!defined($ax_pthread_check_macro)"])
+
+# Are we compiling with Clang?
+
+AC_CACHE_CHECK([whether $CC is Clang],
+ [ax_cv_PTHREAD_CLANG],
+ [ax_cv_PTHREAD_CLANG=no
+ # Note that Autoconf sets GCC=yes for Clang as well as GCC
+ if test "x$GCC" = "xyes"; then
+ AC_EGREP_CPP([AX_PTHREAD_CC_IS_CLANG],
+ [/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
+# if defined(__clang__) && defined(__llvm__)
+ AX_PTHREAD_CC_IS_CLANG
+# endif
+ ],
+ [ax_cv_PTHREAD_CLANG=yes])
+ fi
+ ])
+ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
+
+ax_pthread_clang_warning=no
+
+# Clang needs special handling, because older versions handle the -pthread
+# option in a rather... idiosyncratic way
+
+if test "x$ax_pthread_clang" = "xyes"; then
+
+ # Clang takes -pthread; it has never supported any other flag
+
+ # (Note 1: This will need to be revisited if a system that Clang
+ # supports has POSIX threads in a separate library. This tends not
+ # to be the way of modern systems, but it's conceivable.)
+
+ # (Note 2: On some systems, notably Darwin, -pthread is not needed
+ # to get POSIX threads support; the API is always present and
+ # active. We could reasonably leave PTHREAD_CFLAGS empty. But
+ # -pthread does define _REENTRANT, and while the Darwin headers
+ # ignore this macro, third-party headers might not.)
+
+ PTHREAD_CFLAGS="-pthread"
+ PTHREAD_LIBS=
+
+ ax_pthread_ok=yes
+
+ # However, older versions of Clang make a point of warning the user
+ # that, in an invocation where only linking and no compilation is
+ # taking place, the -pthread option has no effect ("argument unused
+ # during compilation"). They expect -pthread to be passed in only
+ # when source code is being compiled.
+ #
+ # Problem is, this is at odds with the way Automake and most other
+ # C build frameworks function, which is that the same flags used in
+ # compilation (CFLAGS) are also used in linking. Many systems
+ # supported by AX_PTHREAD require exactly this for POSIX threads
+ # support, and in fact it is often not straightforward to specify a
+ # flag that is used only in the compilation phase and not in
+ # linking. Such a scenario is extremely rare in practice.
+ #
+ # Even though use of the -pthread flag in linking would only print
+ # a warning, this can be a nuisance for well-run software projects
+ # that build with -Werror. So if the active version of Clang has
+ # this misfeature, we search for an option to squash it.
+
+ AC_CACHE_CHECK([whether Clang needs flag to prevent "argument unused" warning when linking with -pthread],
+ [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG],
+ [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
+ # Create an alternate version of $ac_link that compiles and
+ # links in two steps (.c -> .o, .o -> exe) instead of one
+ # (.c -> exe), because the warning occurs only in the second
+ # step
+ ax_pthread_save_ac_link="$ac_link"
+ ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
+ ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"`
+ ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do
+ AS_IF([test "x$ax_pthread_try" = "xunknown"], [break])
+ CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS"
+ ac_link="$ax_pthread_save_ac_link"
+ AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
+ [ac_link="$ax_pthread_2step_ac_link"
+ AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
+ [break])
+ ])
+ done
+ ac_link="$ax_pthread_save_ac_link"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ AS_IF([test "x$ax_pthread_try" = "x"], [ax_pthread_try=no])
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
+ ])
+
+ case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
+ no | unknown) ;;
+ *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;;
+ esac
+
+fi # $ax_pthread_clang = yes
+
+if test "x$ax_pthread_ok" = "xno"; then
+for ax_pthread_try_flag in $ax_pthread_flags; do
+
+ case $ax_pthread_try_flag in
+ none)
+ AC_MSG_CHECKING([whether pthreads work without any flags])
+ ;;
+
+ -mt,pthread)
+ AC_MSG_CHECKING([whether pthreads work with -mt -lpthread])
+ PTHREAD_CFLAGS="-mt"
+ PTHREAD_LIBS="-lpthread"
+ ;;
+
+ -*)
+ AC_MSG_CHECKING([whether pthreads work with $ax_pthread_try_flag])
+ PTHREAD_CFLAGS="$ax_pthread_try_flag"
+ ;;
+
+ pthread-config)
+ AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes], [no])
+ AS_IF([test "x$ax_pthread_config" = "xno"], [continue])
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ AC_MSG_CHECKING([for the pthreads library -l$ax_pthread_try_flag])
+ PTHREAD_LIBS="-l$ax_pthread_try_flag"
+ ;;
+ esac
+
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>
+# if $ax_pthread_check_cond
+# error "$ax_pthread_check_macro must be defined"
+# endif
+ static void routine(void *a) { a = 0; }
+ static void *start_routine(void *a) { return a; }],
+ [pthread_t th; pthread_attr_t attr;
+ pthread_create(&th, 0, start_routine, 0);
+ pthread_join(th, 0);
+ pthread_attr_init(&attr);
+ pthread_cleanup_push(routine, 0);
+ pthread_cleanup_pop(0) /* ; */])],
+ [ax_pthread_ok=yes],
+ [])
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ AC_MSG_RESULT([$ax_pthread_ok])
+ AS_IF([test "x$ax_pthread_ok" = "xyes"], [break])
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$ax_pthread_ok" = "xyes"; then
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+
+ # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+ AC_CACHE_CHECK([for joinable pthread attribute],
+ [ax_cv_PTHREAD_JOINABLE_ATTR],
+ [ax_cv_PTHREAD_JOINABLE_ATTR=unknown
+ for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
+ [int attr = $ax_pthread_attr; return attr /* ; */])],
+ [ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break],
+ [])
+ done
+ ])
+ AS_IF([test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
+ test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \
+ test "x$ax_pthread_joinable_attr_defined" != "xyes"],
+ [AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE],
+ [$ax_cv_PTHREAD_JOINABLE_ATTR],
+ [Define to necessary symbol if this constant
+ uses a non-standard name on your system.])
+ ax_pthread_joinable_attr_defined=yes
+ ])
+
+ AC_CACHE_CHECK([whether more special flags are required for pthreads],
+ [ax_cv_PTHREAD_SPECIAL_FLAGS],
+ [ax_cv_PTHREAD_SPECIAL_FLAGS=no
+ case $host_os in
+ solaris*)
+ ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
+ ;;
+ esac
+ ])
+ AS_IF([test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
+ test "x$ax_pthread_special_flags_added" != "xyes"],
+ [PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
+ ax_pthread_special_flags_added=yes])
+
+ AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
+ [ax_cv_PTHREAD_PRIO_INHERIT],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
+ [[int i = PTHREAD_PRIO_INHERIT;]])],
+ [ax_cv_PTHREAD_PRIO_INHERIT=yes],
+ [ax_cv_PTHREAD_PRIO_INHERIT=no])
+ ])
+ AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
+ test "x$ax_pthread_prio_inherit_defined" != "xyes"],
+ [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])
+ ax_pthread_prio_inherit_defined=yes
+ ])
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ # More AIX lossage: compile with *_r variant
+ if test "x$GCC" != "xyes"; then
+ case $host_os in
+ aix*)
+ AS_CASE(["x/$CC"],
+ [x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
+ [#handle absolute path differently from PATH based program lookup
+ AS_CASE(["x$CC"],
+ [x/*],
+ [AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])],
+ [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])])
+ ;;
+ esac
+ fi
+fi
+
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+
+AC_SUBST([PTHREAD_LIBS])
+AC_SUBST([PTHREAD_CFLAGS])
+AC_SUBST([PTHREAD_CC])
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test "x$ax_pthread_ok" = "xyes"; then
+ ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX threads libraries and header files.])],[$1])
+ :
+else
+ ax_pthread_ok=no
+ $2
+fi
+AC_LANG_POP
+])dnl AX_PTHREAD
diff --git a/configure b/configure
index f892b66..921df4e 100755
--- a/configure
+++ b/configure
@@ -1111,7 +1111,7 @@
PTHREAD_CFLAGS
PTHREAD_LIBS
PTHREAD_CC
-acx_pthread_config
+ax_pthread_config
MD5
SOXMIX
PBX_FLEX
@@ -7707,6 +7707,76 @@
MD5="${MD5} -a md5"
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+
@@ -7716,22 +7786,26 @@
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-acx_pthread_ok=no
+ax_pthread_ok=no
# We used to check for pthread.h first, but this fails if pthread.h
-# requires special compiler flags (e.g. on True64 or Sequent).
+# requires special compiler flags (e.g. on Tru64 or Sequent).
# It gets checked for in the link test anyway.
# First of all, check if the user has set any of the PTHREAD_LIBS,
# etcetera environment variables, and if threads linking works using
# them:
-if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
- save_CFLAGS="$CFLAGS"
+if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
+ ax_pthread_save_CC="$CC"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
+ if test "x$PTHREAD_CC" != "x"; then :
+ CC="$PTHREAD_CC"
+fi
CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
- save_LIBS="$LIBS"
LIBS="$PTHREAD_LIBS $LIBS"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS" >&5
-$as_echo_n "checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS" >&5
+$as_echo_n "checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
@@ -7751,18 +7825,19 @@
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- acx_pthread_ok=yes
+ ax_pthread_ok=yes
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_pthread_ok" >&5
-$as_echo "$acx_pthread_ok" >&6; }
- if test x"$acx_pthread_ok" = xno; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5
+$as_echo "$ax_pthread_ok" >&6; }
+ if test "x$ax_pthread_ok" = "xno"; then
PTHREAD_LIBS=""
PTHREAD_CFLAGS=""
fi
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
+ CC="$ax_pthread_save_CC"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
fi
# We must check for the threads library under a number of different
@@ -7775,7 +7850,7 @@
# which indicates that we try without any flags at all, and "pthread-config"
# which is a program returning the flags for the Pth emulation library.
-acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
# The ordering *is* (sometimes) important. Some notes on the
# individual items follow:
@@ -7784,59 +7859,269 @@
# none: in case threads are in libc; should be tried before -Kthread and
# other compiler flags to prevent continual compiler warnings
# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
-# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
-# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
-# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
-# -pthreads: Solaris/gcc
-# -mthreads: Mingw32/gcc, Lynx/gcc
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
+# (Note: HP C rejects this with "bad form for `-t' option")
+# -pthreads: Solaris/gcc (Note: HP C also rejects)
# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
-# doesn't hurt to check since this sometimes defines pthreads too;
-# also defines -D_REENTRANT)
-# ... -mt is also the pthreads flag for HP/aCC
+# doesn't hurt to check since this sometimes defines pthreads and
+# -D_REENTRANT too), HP C (must be checked before -lpthread, which
+# is present but should not be used directly; and before -mthreads,
+# because the compiler interprets this as "-mt" + "-hreads")
+# -mthreads: Mingw32/gcc, Lynx/gcc
# pthread: Linux, etcetera
# --thread-safe: KAI C++
# pthread-config: use pthread-config program (for GNU Pth library)
-case "${host_cpu}-${host_os}" in
- *solaris*)
+case $host_os in
+
+ freebsd*)
+
+ # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+ # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+
+ ax_pthread_flags="-kthread lthread $ax_pthread_flags"
+ ;;
+
+ hpux*)
+
+ # From the cc(1) man page: "[-mt] Sets various -D flags to enable
+ # multi-threading and also sets -lpthread."
+
+ ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
+ ;;
+
+ openedition*)
+
+ # IBM z/OS requires a feature-test macro to be defined in order to
+ # enable POSIX threads at all, so give the user a hint if this is
+ # not set. (We don't define these ourselves, as they can affect
+ # other portions of the system API in unpredictable ways.)
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
+ AX_PTHREAD_ZOS_MISSING
+# endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&5
+$as_echo "$as_me: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&2;}
+fi
+rm -f conftest*
+
+ ;;
+
+ solaris*)
# On Solaris (at least, for some versions), libc contains stubbed
# (non-functional) versions of the pthreads routines, so link-based
- # tests will erroneously succeed. (We need to link with -pthreads/-mt/
- # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
- # a function called by this macro, so we could check for that, but
- # who knows whether they'll stub that too in a future libc.) So,
- # we'll just look for -pthreads and -lpthread first:
+ # tests will erroneously succeed. (N.B.: The stubs are missing
+ # pthread_cleanup_push, or rather a function called by this macro,
+ # so we could check for that, but who knows whether they'll stub
+ # that too in a future libc.) So we'll check first for the
+ # standard Solaris way of linking pthreads (-mt -lpthread).
- acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
+ ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags"
;;
esac
-if test x"$acx_pthread_ok" = xno; then
-for flag in $acx_pthread_flags; do
+# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
- case $flag in
+if test "x$GCC" = "xyes"; then :
+ ax_pthread_flags="-pthread -pthreads $ax_pthread_flags"
+fi
+
+# The presence of a feature test macro requesting re-entrant function
+# definitions is, on some systems, a strong hint that pthreads support is
+# correctly enabled
+
+case $host_os in
+ darwin* | hpux* | linux* | osf* | solaris*)
+ ax_pthread_check_macro="_REENTRANT"
+ ;;
+
+ aix*)
+ ax_pthread_check_macro="_THREAD_SAFE"
+ ;;
+
+ *)
+ ax_pthread_check_macro="--"
+ ;;
+esac
+if test "x$ax_pthread_check_macro" = "x--"; then :
+ ax_pthread_check_cond=0
+else
+ ax_pthread_check_cond="!defined($ax_pthread_check_macro)"
+fi
+
+# Are we compiling with Clang?
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC is Clang" >&5
+$as_echo_n "checking whether $CC is Clang... " >&6; }
+if ${ax_cv_PTHREAD_CLANG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_CLANG=no
+ # Note that Autoconf sets GCC=yes for Clang as well as GCC
+ if test "x$GCC" = "xyes"; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
+# if defined(__clang__) && defined(__llvm__)
+ AX_PTHREAD_CC_IS_CLANG
+# endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1; then :
+ ax_cv_PTHREAD_CLANG=yes
+fi
+rm -f conftest*
+
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG" >&5
+$as_echo "$ax_cv_PTHREAD_CLANG" >&6; }
+ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
+
+ax_pthread_clang_warning=no
+
+# Clang needs special handling, because older versions handle the -pthread
+# option in a rather... idiosyncratic way
+
+if test "x$ax_pthread_clang" = "xyes"; then
+
+ # Clang takes -pthread; it has never supported any other flag
+
+ # (Note 1: This will need to be revisited if a system that Clang
+ # supports has POSIX threads in a separate library. This tends not
+ # to be the way of modern systems, but it's conceivable.)
+
+ # (Note 2: On some systems, notably Darwin, -pthread is not needed
+ # to get POSIX threads support; the API is always present and
+ # active. We could reasonably leave PTHREAD_CFLAGS empty. But
+ # -pthread does define _REENTRANT, and while the Darwin headers
+ # ignore this macro, third-party headers might not.)
+
+ PTHREAD_CFLAGS="-pthread"
+ PTHREAD_LIBS=
+
+ ax_pthread_ok=yes
+
+ # However, older versions of Clang make a point of warning the user
+ # that, in an invocation where only linking and no compilation is
+ # taking place, the -pthread option has no effect ("argument unused
+ # during compilation"). They expect -pthread to be passed in only
+ # when source code is being compiled.
+ #
+ # Problem is, this is at odds with the way Automake and most other
+ # C build frameworks function, which is that the same flags used in
+ # compilation (CFLAGS) are also used in linking. Many systems
+ # supported by AX_PTHREAD require exactly this for POSIX threads
+ # support, and in fact it is often not straightforward to specify a
+ # flag that is used only in the compilation phase and not in
+ # linking. Such a scenario is extremely rare in practice.
+ #
+ # Even though use of the -pthread flag in linking would only print
+ # a warning, this can be a nuisance for well-run software projects
+ # that build with -Werror. So if the active version of Clang has
+ # this misfeature, we search for an option to squash it.
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread" >&5
+$as_echo_n "checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread... " >&6; }
+if ${ax_cv_PTHREAD_CLANG_NO_WARN_FLAG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
+ # Create an alternate version of $ac_link that compiles and
+ # links in two steps (.c -> .o, .o -> exe) instead of one
+ # (.c -> exe), because the warning occurs only in the second
+ # step
+ ax_pthread_save_ac_link="$ac_link"
+ ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
+ ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"`
+ ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do
+ if test "x$ax_pthread_try" = "xunknown"; then :
+ break
+fi
+ CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS"
+ ac_link="$ax_pthread_save_ac_link"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void){return 0;}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_link="$ax_pthread_2step_ac_link"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main(void){return 0;}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+ ac_link="$ax_pthread_save_ac_link"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ if test "x$ax_pthread_try" = "x"; then :
+ ax_pthread_try=no
+fi
+ ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&5
+$as_echo "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&6; }
+
+ case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
+ no | unknown) ;;
+ *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;;
+ esac
+
+fi # $ax_pthread_clang = yes
+
+if test "x$ax_pthread_ok" = "xno"; then
+for ax_pthread_try_flag in $ax_pthread_flags; do
+
+ case $ax_pthread_try_flag in
none)
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work without any flags" >&5
$as_echo_n "checking whether pthreads work without any flags... " >&6; }
;;
- -*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $flag" >&5
-$as_echo_n "checking whether pthreads work with $flag... " >&6; }
- PTHREAD_CFLAGS="$flag"
+ -mt,pthread)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with -mt -lpthread" >&5
+$as_echo_n "checking whether pthreads work with -mt -lpthread... " >&6; }
+ PTHREAD_CFLAGS="-mt"
+ PTHREAD_LIBS="-lpthread"
;;
- pthread-config)
- # Extract the first word of "pthread-config", so it can be a program name with args.
+ -*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $ax_pthread_try_flag" >&5
+$as_echo_n "checking whether pthreads work with $ax_pthread_try_flag... " >&6; }
+ PTHREAD_CFLAGS="$ax_pthread_try_flag"
+ ;;
+
+ pthread-config)
+ # Extract the first word of "pthread-config", so it can be a program name with args.
set dummy pthread-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_acx_pthread_config+:} false; then :
+if ${ac_cv_prog_ax_pthread_config+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$acx_pthread_config"; then
- ac_cv_prog_acx_pthread_config="$acx_pthread_config" # Let the user override the test.
+ if test -n "$ax_pthread_config"; then
+ ac_cv_prog_ax_pthread_config="$ax_pthread_config" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
@@ -7845,7 +8130,7 @@
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_acx_pthread_config="yes"
+ ac_cv_prog_ax_pthread_config="yes"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
@@ -7853,35 +8138,37 @@
done
IFS=$as_save_IFS
- test -z "$ac_cv_prog_acx_pthread_config" && ac_cv_prog_acx_pthread_config="no"
+ test -z "$ac_cv_prog_ax_pthread_config" && ac_cv_prog_ax_pthread_config="no"
fi
fi
-acx_pthread_config=$ac_cv_prog_acx_pthread_config
-if test -n "$acx_pthread_config"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_pthread_config" >&5
-$as_echo "$acx_pthread_config" >&6; }
+ax_pthread_config=$ac_cv_prog_ax_pthread_config
+if test -n "$ax_pthread_config"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_config" >&5
+$as_echo "$ax_pthread_config" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test x"$acx_pthread_config" = xno; then continue; fi
- PTHREAD_CFLAGS="`pthread-config --cflags`"
- PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
- ;;
+ if test "x$ax_pthread_config" = "xno"; then :
+ continue
+fi
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$flag" >&5
-$as_echo_n "checking for the pthreads library -l$flag... " >&6; }
- PTHREAD_LIBS="-l$flag"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$ax_pthread_try_flag" >&5
+$as_echo_n "checking for the pthreads library -l$ax_pthread_try_flag... " >&6; }
+ PTHREAD_LIBS="-l$ax_pthread_try_flag"
;;
esac
- save_LIBS="$LIBS"
- save_CFLAGS="$CFLAGS"
- LIBS="$PTHREAD_LIBS $LIBS"
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
# Check for various functions. We must include pthread.h,
# since some functions may be macros. (On the Sequent, we
@@ -7892,33 +8179,42 @@
# pthread_cleanup_push because it is one of the few pthread
# functions on Solaris that doesn't have a non-functional libc stub.
# We try pthread_create on general principles.
+
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <pthread.h>
+# if $ax_pthread_check_cond
+# error "$ax_pthread_check_macro must be defined"
+# endif
+ static void routine(void *a) { a = 0; }
+ static void *start_routine(void *a) { return a; }
int
main ()
{
-pthread_t th; pthread_join(th, 0);
- pthread_attr_init(0); pthread_cleanup_push(0, 0);
- pthread_create(0,0,0,0); pthread_cleanup_pop(0);
+pthread_t th; pthread_attr_t attr;
+ pthread_create(&th, 0, start_routine, 0);
+ pthread_join(th, 0);
+ pthread_attr_init(&attr);
+ pthread_cleanup_push(routine, 0);
+ pthread_cleanup_pop(0) /* ; */
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- acx_pthread_ok=yes
+ ax_pthread_ok=yes
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_pthread_ok" >&5
-$as_echo "$acx_pthread_ok" >&6; }
- if test "x$acx_pthread_ok" = xyes; then
- break;
- fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5
+$as_echo "$ax_pthread_ok" >&6; }
+ if test "x$ax_pthread_ok" = "xyes"; then :
+ break
+fi
PTHREAD_LIBS=""
PTHREAD_CFLAGS=""
@@ -7926,63 +8222,127 @@
fi
# Various other checks:
-if test "x$acx_pthread_ok" = xyes; then
- save_LIBS="$LIBS"
- LIBS="$PTHREAD_LIBS $LIBS"
- save_CFLAGS="$CFLAGS"
+if test "x$ax_pthread_ok" = "xyes"; then
+ ax_pthread_save_CFLAGS="$CFLAGS"
+ ax_pthread_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
# Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5
$as_echo_n "checking for joinable pthread attribute... " >&6; }
- attr_name=unknown
- for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+if ${ax_cv_PTHREAD_JOINABLE_ATTR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_JOINABLE_ATTR=unknown
+ for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <pthread.h>
int
main ()
{
-int attr=$attr; return attr;
+int attr = $ax_pthread_attr; return attr /* ; */
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- attr_name=$attr; break
+ ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- done
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $attr_name" >&5
-$as_echo "$attr_name" >&6; }
- if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
+ done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_JOINABLE_ATTR" >&5
+$as_echo "$ax_cv_PTHREAD_JOINABLE_ATTR" >&6; }
+ if test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
+ test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \
+ test "x$ax_pthread_joinable_attr_defined" != "xyes"; then :
cat >>confdefs.h <<_ACEOF
-#define PTHREAD_CREATE_JOINABLE $attr_name
+#define PTHREAD_CREATE_JOINABLE $ax_cv_PTHREAD_JOINABLE_ATTR
_ACEOF
- fi
+ ax_pthread_joinable_attr_defined=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if more special flags are required for pthreads" >&5
-$as_echo_n "checking if more special flags are required for pthreads... " >&6; }
- flag=no
- case "${host_cpu}-${host_os}" in
- *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
- *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
- esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${flag}" >&5
-$as_echo "${flag}" >&6; }
- if test "x$flag" != xno; then
- PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
- fi
+fi
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether more special flags are required for pthreads" >&5
+$as_echo_n "checking whether more special flags are required for pthreads... " >&6; }
+if ${ax_cv_PTHREAD_SPECIAL_FLAGS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ax_cv_PTHREAD_SPECIAL_FLAGS=no
+ case $host_os in
+ solaris*)
+ ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
+ ;;
+ esac
- # More AIX lossage: must compile with xlc_r or cc_r
- if test x"$GCC" != xyes; then
- for ac_prog in xlc_r cc_r
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_SPECIAL_FLAGS" >&5
+$as_echo "$ax_cv_PTHREAD_SPECIAL_FLAGS" >&6; }
+ if test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
+ test "x$ax_pthread_special_flags_added" != "xyes"; then :
+ PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
+ ax_pthread_special_flags_added=yes
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PTHREAD_PRIO_INHERIT" >&5
+$as_echo_n "checking for PTHREAD_PRIO_INHERIT... " >&6; }
+if ${ax_cv_PTHREAD_PRIO_INHERIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int i = PTHREAD_PRIO_INHERIT;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ax_cv_PTHREAD_PRIO_INHERIT=yes
+else
+ ax_cv_PTHREAD_PRIO_INHERIT=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_PRIO_INHERIT" >&5
+$as_echo "$ax_cv_PTHREAD_PRIO_INHERIT" >&6; }
+ if test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
+ test "x$ax_pthread_prio_inherit_defined" != "xyes"; then :
+
+$as_echo "#define HAVE_PTHREAD_PRIO_INHERIT 1" >>confdefs.h
+
+ ax_pthread_prio_inherit_defined=yes
+
+fi
+
+ CFLAGS="$ax_pthread_save_CFLAGS"
+ LIBS="$ax_pthread_save_LIBS"
+
+ # More AIX lossage: compile with *_r variant
+ if test "x$GCC" != "xyes"; then
+ case $host_os in
+ aix*)
+ case "x/$CC" in #(
+ x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6) :
+ #handle absolute path differently from PATH based program lookup
+ case "x$CC" in #(
+ x/*) :
+ if as_fn_executable_p ${CC}_r; then :
+ PTHREAD_CC="${CC}_r"
+fi ;; #(
+ *) :
+ for ac_prog in ${CC}_r
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -8023,27 +8383,31 @@
test -n "$PTHREAD_CC" && break
done
-test -n "$PTHREAD_CC" || PTHREAD_CC="${CC}"
-
- else
- PTHREAD_CC=$CC
- fi
-else
- PTHREAD_CC="$CC"
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+ ;;
+esac ;; #(
+ *) :
+ ;;
+esac
+ ;;
+ esac
+ fi
fi
+
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
-if test x"$acx_pthread_ok" = xyes; then
+if test "x$ax_pthread_ok" = "xyes"; then
$as_echo "#define HAVE_PTHREAD 1" >>confdefs.h
:
else
- acx_pthread_ok=no
+ ax_pthread_ok=no
fi
ac_ext=c
diff --git a/configure.ac b/configure.ac
index 6229dd9..8f00c36 100644
--- a/configure.ac
+++ b/configure.ac
@@ -331,7 +331,7 @@
MD5="${MD5} -a md5"
fi
-ACX_PTHREAD
+AX_PTHREAD
AC_LANG(C)
diff --git a/include/asterisk/autoconfig.h.in b/include/asterisk/autoconfig.h.in
index f7048a5..e089da1 100644
--- a/include/asterisk/autoconfig.h.in
+++ b/include/asterisk/autoconfig.h.in
@@ -653,6 +653,9 @@
*/
#undef HAVE_PTHREAD_MUTEX_RECURSIVE_NP
+/* Have PTHREAD_PRIO_INHERIT. */
+#undef HAVE_PTHREAD_PRIO_INHERIT
+
/* Define if your system has the PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP
headers. */
#undef HAVE_PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP
--
To view, visit https://gerrit.asterisk.org/3185
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: merged
Gerrit-Change-Id: I11abc11d17acd2b6a8a5a5be8ae8e0949dab9cc7
Gerrit-PatchSet: 1
Gerrit-Project: asterisk
Gerrit-Branch: 11
Gerrit-Owner: Alexander Traud <pabstraud at compuserve.com>
Gerrit-Reviewer: Anonymous Coward #1000019
Gerrit-Reviewer: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
More information about the asterisk-commits
mailing list